860 research outputs found
Increasing the Efficiency of 6-DoF Visual Localization Using Multi-Modal Sensory Data
Localization is a key requirement for mobile robot autonomy and human-robot
interaction. Vision-based localization is accurate and flexible, however, it
incurs a high computational burden which limits its application on many
resource-constrained platforms. In this paper, we address the problem of
performing real-time localization in large-scale 3D point cloud maps of
ever-growing size. While most systems using multi-modal information reduce
localization time by employing side-channel information in a coarse manner (eg.
WiFi for a rough prior position estimate), we propose to inter-weave the map
with rich sensory data. This multi-modal approach achieves two key goals
simultaneously. First, it enables us to harness additional sensory data to
localise against a map covering a vast area in real-time; and secondly, it also
allows us to roughly localise devices which are not equipped with a camera. The
key to our approach is a localization policy based on a sequential Monte Carlo
estimator. The localiser uses this policy to attempt point-matching only in
nodes where it is likely to succeed, significantly increasing the efficiency of
the localization process. The proposed multi-modal localization system is
evaluated extensively in a large museum building. The results show that our
multi-modal approach not only increases the localization accuracy but
significantly reduces computational time.Comment: Presented at IEEE-RAS International Conference on Humanoid Robots
(Humanoids) 201
Four years of multi-modal odometry and mapping on the rail vehicles
Precise, seamless, and efficient train localization as well as long-term
railway environment monitoring is the essential property towards reliability,
availability, maintainability, and safety (RAMS) engineering for railroad
systems. Simultaneous localization and mapping (SLAM) is right at the core of
solving the two problems concurrently. In this end, we propose a
high-performance and versatile multi-modal framework in this paper, targeted
for the odometry and mapping task for various rail vehicles. Our system is
built atop an inertial-centric state estimator that tightly couples light
detection and ranging (LiDAR), visual, optionally satellite navigation and
map-based localization information with the convenience and extendibility of
loosely coupled methods. The inertial sensors IMU and wheel encoder are treated
as the primary sensor, which achieves the observations from subsystems to
constrain the accelerometer and gyroscope biases. Compared to point-only
LiDAR-inertial methods, our approach leverages more geometry information by
introducing both track plane and electric power pillars into state estimation.
The Visual-inertial subsystem also utilizes the environmental structure
information by employing both lines and points. Besides, the method is capable
of handling sensor failures by automatic reconfiguration bypassing failure
modules. Our proposed method has been extensively tested in the long-during
railway environments over four years, including general-speed, high-speed and
metro, both passenger and freight traffic are investigated. Further, we aim to
share, in an open way, the experience, problems, and successes of our group
with the robotics community so that those that work in such environments can
avoid these errors. In this view, we open source some of the datasets to
benefit the research community
The Future of Humanoid Robots
This book provides state of the art scientific and engineering research findings and developments in the field of humanoid robotics and its applications. It is expected that humanoids will change the way we interact with machines, and will have the ability to blend perfectly into an environment already designed for humans. The book contains chapters that aim to discover the future abilities of humanoid robots by presenting a variety of integrated research in various scientific and engineering fields, such as locomotion, perception, adaptive behavior, human-robot interaction, neuroscience and machine learning. The book is designed to be accessible and practical, with an emphasis on useful information to those working in the fields of robotics, cognitive science, artificial intelligence, computational methods and other fields of science directly or indirectly related to the development and usage of future humanoid robots. The editor of the book has extensive R&D experience, patents, and publications in the area of humanoid robotics, and his experience is reflected in editing the content of the book
Prevalence of haptic feedback in robot-mediated surgery : a systematic review of literature
© 2017 Springer-Verlag. This is a post-peer-review, pre-copyedit version of an article published in Journal of Robotic Surgery. The final authenticated version is available online at: https://doi.org/10.1007/s11701-017-0763-4With the successful uptake and inclusion of robotic systems in minimally invasive surgery and with the increasing application of robotic surgery (RS) in numerous surgical specialities worldwide, there is now a need to develop and enhance the technology further. One such improvement is the implementation and amalgamation of haptic feedback technology into RS which will permit the operating surgeon on the console to receive haptic information on the type of tissue being operated on. The main advantage of using this is to allow the operating surgeon to feel and control the amount of force applied to different tissues during surgery thus minimising the risk of tissue damage due to both the direct and indirect effects of excessive tissue force or tension being applied during RS. We performed a two-rater systematic review to identify the latest developments and potential avenues of improving technology in the application and implementation of haptic feedback technology to the operating surgeon on the console during RS. This review provides a summary of technological enhancements in RS, considering different stages of work, from proof of concept to cadaver tissue testing, surgery in animals, and finally real implementation in surgical practice. We identify that at the time of this review, while there is a unanimous agreement regarding need for haptic and tactile feedback, there are no solutions or products available that address this need. There is a scope and need for new developments in haptic augmentation for robot-mediated surgery with the aim of improving patient care and robotic surgical technology further.Peer reviewe
Event-based Vision: A Survey
Event cameras are bio-inspired sensors that differ from conventional frame
cameras: Instead of capturing images at a fixed rate, they asynchronously
measure per-pixel brightness changes, and output a stream of events that encode
the time, location and sign of the brightness changes. Event cameras offer
attractive properties compared to traditional cameras: high temporal resolution
(in the order of microseconds), very high dynamic range (140 dB vs. 60 dB), low
power consumption, and high pixel bandwidth (on the order of kHz) resulting in
reduced motion blur. Hence, event cameras have a large potential for robotics
and computer vision in challenging scenarios for traditional cameras, such as
low-latency, high speed, and high dynamic range. However, novel methods are
required to process the unconventional output of these sensors in order to
unlock their potential. This paper provides a comprehensive overview of the
emerging field of event-based vision, with a focus on the applications and the
algorithms developed to unlock the outstanding properties of event cameras. We
present event cameras from their working principle, the actual sensors that are
available and the tasks that they have been used for, from low-level vision
(feature detection and tracking, optic flow, etc.) to high-level vision
(reconstruction, segmentation, recognition). We also discuss the techniques
developed to process events, including learning-based techniques, as well as
specialized processors for these novel sensors, such as spiking neural
networks. Additionally, we highlight the challenges that remain to be tackled
and the opportunities that lie ahead in the search for a more efficient,
bio-inspired way for machines to perceive and interact with the world
Sensors for Robotic Hands: A Survey of State of the Art
Recent decades have seen significant progress in the field of artificial hands. Most of the
surveys, which try to capture the latest developments in this field, focused on actuation and control systems of these devices. In this paper, our goal is to provide a comprehensive survey of the sensors for artificial hands. In order to present the evolution of the field, we cover five year periods starting at the turn of the millennium. At each period, we present the robot hands with a focus on their sensor systems dividing them into categories, such as prosthetics, research devices, and industrial end-effectors.We also cover the sensors developed for robot hand usage in each era. Finally, the period between 2010 and 2015 introduces the reader to the state of the art and also hints to the future directions in the sensor development for artificial hands
- …