Enhanced delay-aware and reliable routing protocol for wireless sensor network

Wireless Sensor Networks (WSN) are distributed low-rate data networks, consist of small sensing nodes equipped with memory, processors and short range wireless communication. The performance of WSN is always measured by the Quality of Service (QoS) parameters that are time delay, reliability and throughput. These networks are dynamic in nature and affect the QoS parameters, especially when real time data delivery is needed. Additionally, in achieving end-to-end delay and reliability, link failures are the major causes that have not been given much attention. So, there is a demanding need of an efficient routing protocol to be developed in order to minimize the delay and provide on time delivery of data in real time WSN applications. An efficient Delay-Aware Path Selection Algorithm (DAPSA) is proposed to minimize the access end-to-end delay based on hop count, link quality and residual energy metrics considering the on time packets delivery. Furthermore, an Intelligent Service Classifier Queuing Model (ISCQM) is proposed to distinguish the real time and non-real time traffic by applying service discriminating theory to ensure delivery of real time data with acceptable delay. Moreover, an Efficient Data Delivery and Recovery Scheme (EDDRS) is proposed to achieve improved packet delivery ratio and control link failures in transmission. This will then improve the overall throughput. Based on the above mentioned approaches, an Enhanced Delay-Aware and Reliable Routing Protocol (EDARRP) is developed. Simulation experiments have been performed using NS2 simulator and multiple scenarios are considered in order to examine the performance parameters. The results are compared with the state-of-the-art routing protocols Stateless Protocol for Real-Time Communication (SPEED) and Distributed Adaptive Cooperative Routing Protocol (DACR) and found that on average the proposed protocol has improved the performance in terms of end-to-end delay (30.10%), packet delivery ratio (9.26%) and throughput (5.42%). The proposed EDARRP protocol has improved the performance of WSN

A critical analysis of research potential, challenges and future directives in industrial wireless sensor networks

In recent years, Industrial Wireless Sensor Networks (IWSNs) have emerged as an important research theme with applications spanning a wide range of industries including automation, monitoring, process control, feedback systems and automotive. Wide scope of IWSNs applications ranging from small production units, large oil and gas industries to nuclear fission control, enables a fast-paced research in this field. Though IWSNs offer advantages of low cost, flexibility, scalability, self-healing, easy deployment and reformation, yet they pose certain limitations on available potential and introduce challenges on multiple fronts due to their susceptibility to highly complex and uncertain industrial environments. In this paper a detailed discussion on design objectives, challenges and solutions, for IWSNs, are presented. A careful evaluation of industrial systems, deadlines and possible hazards in industrial atmosphere are discussed. The paper also presents a thorough review of the existing standards and industrial protocols and gives a critical evaluation of potential of these standards and protocols along with a detailed discussion on available hardware platforms, specific industrial energy harvesting techniques and their capabilities. The paper lists main service providers for IWSNs solutions and gives insight of future trends and research gaps in the field of IWSNs

Routing, Localization And Positioning Protocols For Wireless Sensor And Actor Networks

Wireless sensor and actor networks (WSANs) are distributed systems of sensor nodes and actors that are interconnected over the wireless medium. Sensor nodes collect information about the physical world and transmit the data to actors by using one-hop or multi-hop communications. Actors collect information from the sensor nodes, process the information, take decisions and react to the events. This dissertation presents contributions to the methods of routing, localization and positioning in WSANs for practical applications. We first propose a routing protocol with service differentiation for WSANs with stationary nodes. In this setting, we also adapt a sports ranking algorithm to dynamically prioritize the events in the environment depending on the collected data. We extend this routing protocol for an application, in which sensor nodes float in a river to gather observations and actors are deployed at accessible points on the coastline. We develop a method with locally acting adaptive overlay network formation to organize the network with actor areas and to collect data by using locality-preserving communication. We also present a multi-hop localization approach for enriching the information collected from the river with the estimated locations of mobile sensor nodes without using positioning adapters. As an extension to this application, we model the movements of sensor nodes by a subsurface meandering current mobility model with random surface motion. Then we adapt the introduced routing and network organization methods to model a complete primate monitoring system. A novel spatial cut-off preferential attachment model and iii center of mass concept are developed according to the characteristics of the primate groups. We also present a role determination algorithm for primates, which uses the collection of spatial-temporal relationships. We apply a similar approach to human social networks to tackle the problem of automatic generation and organization of social networks by analyzing and assessing interaction data. The introduced routing and localization protocols in this dissertation are also extended with a novel three dimensional actor positioning strategy inspired by the molecular geometry. Extensive simulations are conducted in OPNET simulation tool for the performance evaluation of the proposed protocol

Fast mobility support in low-power wireless networks: smart-HOP over RPL/6LoWPAN

With the emergence of low-power wireless hardware new ways of communication were needed. In order to standardize the communication between these low powered devices the Internet Engineering Task Force (IETF) released the 6LoWPAN stand- ard that acts as an additional layer for making the IPv6 link layer suitable for the lower-power and lossy networks. In the same way, IPv6 Routing Protocol for Low- Power and Lossy Networks (RPL) has been proposed by the IETF Routing Over Low power and Lossy networks (ROLL) Working Group as a standard routing protocol for IPv6 routing in low-power wireless sensor networks. The research performed in this thesis uses these technologies to implement a mobility process. Mobility management is a fundamental yet challenging area in low-power wireless networks. There are applications that require mobile nodes to exchange data with a xed infrastructure with quality-of-service guarantees. A prime example of these applications is the monitoring of patients in real-time. In these scenarios, broadcast- ing data to all access points (APs) within range may not be a valid option due to the energy consumption, data storage and complexity requirements. An alternative and e cient option is to allow mobile nodes to perform hand-o s. Hand-o mechanisms have been well studied in cellular and ad-hoc networks. However, low-power wireless networks pose a new set of challenges. On one hand, simpler radios and constrained resources ask for simpler hand-o schemes. On the other hand, the shorter coverage and higher variability of low-power links require a careful tuning of the hand-o parameters. In this work, we tackle the problem of integrating smart-HOP within a standard protocol, speci cally RPL. The simulation results in Cooja indicate that the pro- posed scheme minimizes the hand-o delay and the total network overhead. The standard RPL protocol is simply unable to provide a reliable mobility support sim- ilar to other COTS technologies. Instead, they support joining and leaving of nodes, with very low responsiveness in the existence of physical mobility

Technologies to improve the performance of wireless sensor networks in high-traffic applications

The expansion of wireless sensor networks to advanced areas, including structure health monitoring, multimedia surveillance, and health care monitoring applications, has resulted in new and complex problems. Traditional sensor systems are designed and optimised for extremely low traffic loads. However, it has been witnessed that network performance drops rapidly with the higher traffic loads common in advanced applications. In this thesis, we examine the system characteristics and new system requirements of these advanced sensor network applications. Based on this analysis, we propose an improved architecture for wireless sensor systems to increase the network performance while maintaining compatibility with the essential WSN requirements: low power, low cost, and distributed scalability. We propose a modified architecture deriving from the IEEE 802.15.4 standard, which is shown to significantly increase the network performance in applications generating increased data loads. This is achieved by introducing the possibility of independently allocating the sub-carriers in a distributed manner. As a result, the overall efficiency of the channel contention mechanism will be increased to deliver higher throughput with lower energy consumption. Additionally, we develop the concept of increasing the data transmission efficiency by adapting the spreading code length to the wireless environment. Such a modification will not only be able to deliver higher throughput but also maintain a reliable wireless link in the harsh RF environment. Finally, we propose the use of the battery recovery effect to increase the power efficiency of the system under heavy traffic load conditions. These three innovations minimise the contention window period while maximising the capacity of the available channel, which is shown to increase network performance in terms of energy efficiency, throughput and latency. The proposed system is shown to be backwards compatible and able to satisfy both traditional and advanced applications and is particularly suitable for deployment in harsh RF environments. Experiments and analytic techniques have been described and developed to produce performance metrics for all the proposed techniques