Volumetric diffusers : pseudorandom cylinder arrays on a periodic lattice

Most conventional diffusers take the form of a surface based treatment, and as a result can only operate in hemispherical space. Placing a diffuser in the volume of a room might provide greater efficiency by allowing scattering into the whole space. A periodic cylinder array (or sonic crystal) produces periodicity lobes and uneven scattering. Introducing defects into an array, by removing or varying the size of some of the cylinders, can enhance their diffusing abilities. This paper applies number theoretic concepts to create cylinder arrays that have more even scattering. Predictions using a Boundary Element Method are compared to measurements to verify the model, and suitable metrics are adopted to evaluate performance. Arrangements with good aperiodic autocorrelation properties tend to produce the best results. At low frequency power is controlled by object size and at high frequency diffusion is dominated by lattice spacing and structural similarity. Consequently the operational bandwidth is rather small. By using sparse arrays and varying cylinder sizes, a wider bandwidth can be achieved

Maximum length sequence and Bessel diffusers using active technologies

Active technologies can enable room acoustic diffusers to operate over a wider bandwidth than passive devices, by extending the bass response. Active impedance control can be used to generate surface impedance distributions which cause wavefront dispersion, as opposed to the more normal absorptive or pressure-cancelling target functions. This paper details the development of two new types of active diffusers which are difficult, if not impossible, to make as passive wide-band structures. The first type is a maximum length sequence diffuser where the well depths are designed to be frequency dependent to avoid the critical frequencies present in the passive device, and so achieve performance over a finite-bandwidth. The second is a Bessel diffuser, which exploits concepts developed for transducer arrays to form a hybrid absorber–diffuser. Details of the designs are given, and measurements of scattering and impedance used to show that the active diffusers are operating correctly over a bandwidth of about 100 Hz to 1.1 kHz. Boundary element method simulation is used to show how more application-realistic arrays of these devices would behave

Pilot Decontamination in CMT-based Massive MIMO Networks

Pilot contamination problem in massive MIMO networks operating in time-division duplex (TDD) mode can limit their expected capacity to a great extent. This paper addresses this problem in cosine modulated multitone (CMT) based massive MIMO networks; taking advantage of their so-called blind equalization property. We extend and apply the blind equalization technique from single antenna case to multi-cellular massive MIMO systems and show that it can remove the channel estimation errors (due to pilot contamination effect) without any need for cooperation between different cells or transmission of additional training information. Our numerical results advocate the efficacy of the proposed blind technique in improving the channel estimation accuracy and removal of the residual channel estimation errors caused by the users of the other cells.Comment: Accepted in ISWCS 201

A survey of the state of the art and focused research in range systems, task 2

Contract generated publications are compiled which describe the research activities for the reporting period. Study topics include: equivalent configurations of systolic arrays; least squares estimation algorithms with systolic array architectures; modeling and equilization of nonlinear bandlimited satellite channels; and least squares estimation and Kalman filtering by systolic arrays

A modular FPGA-based ultrasonic array system for applications including non-destructive testing

This paper reports work aimed at the development of an ultrasonic imaging system comprising modular, reprogrammable building blocks, or tiles, which can be customised for multiple applications, including and within non-destructive testing (NDT), by the user. The key component is an autonomous module containing the ultrasonic array and all the electronics necessary to operate it. This contrasts with most previous research on system integration which has focused only on the transducer and front-end electronics.<p></p> In the present work, a 4 4 element 2D piezoelectric array with a 16 mm 16 mm aperture has been produced, with the entire transmission and reception electronics within the same footprint. The proximity of the transducer array and electronics removes the need for cabling, reducing signal degradation due to cross talk and interference. In addition, it avoids the problem of electrical impedance matching of cable between the array elements and the electronics. <p></p> Pulse-echo insertion loss of 48 dB has been measured from back-wall reflections in 73 mm-thick aluminium without decoding, and results with decoded signals show adequate signal-to-noise ratio (SNR) with 3.3 V excitation at an operating frequency of 1.2 MHz, within the range required for deep penetration in nuclear power plant. <p></p> Crucially, the ability to construct 2D arrays of any size and shape from generic building blocks represents a departure from almost all previous work in ultrasound, which has traditionally been highly application specific. This may allow ultrasonic NDT to be used in applications for which the investment in customised devices could not previously be justified. <p></p&gt