A New Coding Paradigm for the Primitive Relay Channel

We consider the primitive relay channel, where the source sends a message to the relay and to the destination, and the relay helps the communication by transmitting an additional message to the destination via a separate channel. Two well-known coding techniques have been introduced for this setting: decode-and-forward and compress-and-forward. In decode-and-forward, the relay completely decodes the message and sends some information to the destination; in compress-and-forward, the relay does not decode, and it sends a compressed version of the received signal to the destination using Wyner-Ziv coding. In this paper, we present a novel coding paradigm that provides an improved achievable rate for the primitive relay channel. The idea is to combine compress-and-forward and decode-and-forward via a chaining construction. We transmit over pairs of blocks: in the first block, we use compress-and-forward; and in the second block, we use decode-and-forward. More specifically, in the first block, the relay does not decode, it compresses the received signal via Wyner-Ziv, and it sends only part of the compression to the destination. In the second block, the relay completely decodes the message, it sends some information to the destination, and it also sends the remaining part of the compression coming from the first block. By doing so, we are able to strictly outperform both compress-and-forward and decode-and-forward. Note that the proposed coding scheme can be implemented with polar codes. As such, it has the typical attractive properties of polar coding schemes, namely, quasi-linear encoding and decoding complexity, and error probability that decays at super-polynomial speed. As a running example, we take into account the special case of the erasure relay channel, and we provide a comparison between the rates achievable by our proposed scheme and the existing upper and lower bounds.Comment: 10 pages, 4 figures, in Proc. of ISIT'18 (short version) and in Algorithms (full version

On Joint Source-Channel Coding for Correlated Sources Over Multiple-Access Relay Channels

We study the transmission of correlated sources over discrete memoryless (DM) multiple-access-relay channels (MARCs), in which both the relay and the destination have access to side information arbitrarily correlated with the sources. As the optimal transmission scheme is an open problem, in this work we propose a new joint source-channel coding scheme based on a novel combination of the correlation preserving mapping (CPM) technique with Slepian-Wolf (SW) source coding, and obtain the corresponding sufficient conditions. The proposed coding scheme is based on the decode-and-forward strategy, and utilizes CPM for encoding information simultaneously to the relay and the destination, whereas the cooperation information from the relay is encoded via SW source coding. It is shown that there are cases in which the new scheme strictly outperforms the schemes available in the literature. This is the first instance of a source-channel code that uses CPM for encoding information to two different nodes (relay and destination). In addition to sufficient conditions, we present three different sets of single-letter necessary conditions for reliable transmission of correlated sources over DM MARCs. The newly derived conditions are shown to be at least as tight as the previously known necessary conditions.Comment: Accepted to TI

Incremental Relaying for the Gaussian Interference Channel with a Degraded Broadcasting Relay

This paper studies incremental relay strategies for a two-user Gaussian relay-interference channel with an in-band-reception and out-of-band-transmission relay, where the link between the relay and the two receivers is modelled as a degraded broadcast channel. It is shown that generalized hash-and-forward (GHF) can achieve the capacity region of this channel to within a constant number of bits in a certain weak relay regime, where the transmitter-to-relay link gains are not unboundedly stronger than the interference links between the transmitters and the receivers. The GHF relaying strategy is ideally suited for the broadcasting relay because it can be implemented in an incremental fashion, i.e., the relay message to one receiver is a degraded version of the message to the other receiver. A generalized-degree-of-freedom (GDoF) analysis in the high signal-to-noise ratio (SNR) regime reveals that in the symmetric channel setting, each common relay bit can improve the sum rate roughly by either one bit or two bits asymptotically depending on the operating regime, and the rate gain can be interpreted as coming solely from the improvement of the common message rates, or alternatively in the very weak interference regime as solely coming from the rate improvement of the private messages. Further, this paper studies an asymmetric case in which the relay has only a single single link to one of the destinations. It is shown that with only one relay-destination link, the approximate capacity region can be established for a larger regime of channel parameters. Further, from a GDoF point of view, the sum-capacity gain due to the relay can now be thought as coming from either signal relaying only, or interference forwarding only.Comment: To appear in IEEE Trans. on Inf. Theor

Cyclic division algebras: a tool for space-time coding

Multiple antennas at both the transmitter and receiver ends of a wireless digital transmission channel may increase both data rate and reliability. Reliable high rate transmission over such channels can only be achieved through Space–Time coding. Rank and determinant code design criteria have been proposed to enhance diversity and coding gain. The special case of full-diversity criterion requires that the difference of any two distinct codewords has full rank. Extensive work has been done on Space–Time coding, aiming at finding fully diverse codes with high rate. Division algebras have been proposed as a new tool for constructing Space–Time codes, since they are non-commutative algebras that naturally yield linear fully diverse codes. Their algebraic properties can thus be further exploited to improve the design of good codes. The aim of this work is to provide a tutorial introduction to the algebraic tools involved in the design of codes based on cyclic division algebras. The different design criteria involved will be illustrated, including the constellation shaping, the information lossless property, the non-vanishing determinant property, and the diversity multiplexing trade-off. The final target is to give the complete mathematical background underlying the construction of the Golden code and the other Perfect Space–Time block codes

On capacity of line networks

We consider communication through a cascade of discrete memoryless channels (DMCs). The source and destination node of this cascade are allowed to use coding schemes of arbi- trary complexity, but the intermediate relay nodes are restricted to process only blocks of a fixed length. We investigate how the processing at the relays must be chosen in order to maximize the capacity of the cascade, that is, the maximum achievable end-to-end rate between the source and the destination. For infinite cascades with fixed intermediate processing length at the relays, we prove that this intermediate processing can be chosen to be identical without loss of optimality, and that the capacity of the cascade coincides with the rate of the best zero-error code of length equal to the block length of the intermediate processing. We further show that for fixed and identical intermediate processing at all relays, convergence of capacity as the length of the cascade goes to infinity is exponentially fast. Finally, we characterize how the block length of the intermediate processing must scale with the length of the cascade to guarantee a constant end-to-end rate. We prove that it is sufficient that the block length scales logarithmically with the network length in order to achieve any rate above the zero-error capacity. We show that in many cases of interest logarithmic growth is also necessary

Cooperative strategies design based on the diversity and multiplexing tradeoff

This thesis focuses on designing wireless cooperative communication strategies that are either optimal or near-optimal in terms of the tradeoff between diversity and multiplexing gains. Starting from classical cooperative broadcast, multiple-access and relay channels with unit degree of freedom, to more general cooperative interference channels with higher degrees of freedom, properties of different network topologies are studied and their unique characteristics together with several advanced interference management techniques are exploited to design cooperative transmission strategies in order to enhance data rate, reliability or both at the same time. Moreover, various algorithms are proposed to solve practical implementation issues and performance is analyzed through both theoretical verifications and simulations