1,511 research outputs found
The Error-Pattern-Correcting Turbo Equalizer
The error-pattern correcting code (EPCC) is incorporated in the design of a
turbo equalizer (TE) with aim to correct dominant error events of the
inter-symbol interference (ISI) channel at the output of its matching Viterbi
detector. By targeting the low Hamming-weight interleaved errors of the outer
convolutional code, which are responsible for low Euclidean-weight errors in
the Viterbi trellis, the turbo equalizer with an error-pattern correcting code
(TE-EPCC) exhibits a much lower bit-error rate (BER) floor compared to the
conventional non-precoded TE, especially for high rate applications. A
maximum-likelihood upper bound is developed on the BER floor of the TE-EPCC for
a generalized two-tap ISI channel, in order to study TE-EPCC's signal-to-noise
ratio (SNR) gain for various channel conditions and design parameters. In
addition, the SNR gain of the TE-EPCC relative to an existing precoded TE is
compared to demonstrate the present TE's superiority for short interleaver
lengths and high coding rates.Comment: This work has been submitted to the special issue of the IEEE
Transactions on Information Theory titled: "Facets of Coding Theory: from
Algorithms to Networks". This work was supported in part by the NSF
Theoretical Foundation Grant 0728676
Turbo Detection of Space-time Trellis-Coded Constant Bit Rate Vector-Quantised Videophone System using Reversible Variable-Length Codes, Convolutional Codes and Turbo Codes
In this treatise we characterise the achievable performance of a proprietary video transmission system, which employs a Constant Bit Rate (CBR) video codec that is concatenated with one of three error correction codecs, namely a Reversible Variable-Length Code (RVLC), a Convolutional Code (CC) or a convolutional-based Turbo Code (TC). In our investigations, the CBR video codec was invoked in conjunction with Space-Time Trellis Coding (STTC) designed for transmission over a dispersive Rayleigh fading channel. At the receiver, the channel equaliser, the STTC decoder and the RVLC, CC or TC decoder, as appropriate, employ the Max-Log Maximum A-Posteriori (MAP) algorithm and their operations are performed in an iterative 'turbo-detection' fashion. The systems were designed for maintaining similar error-free video reconstruction qualities, which were found to be subjectively pleasing at a Peak Signal to Noise Ratio (PSNR) of 30.6~dB, at a similar decoding complexity per decoding iteration. These design criteria were achieved by employing differing transmission rates, with the CC- and TC-based systems having a 22% higher bandwidth requirement. The results demonstrated that the TC-, RVLC- and CC-based systems achieve acceptable subjective reconstructed video quality associated with an average PSNR in excess of 30~dB for values above 4.6~dB, 6.4~dB and 7.7~dB, respectively. The design choice between the TC- and RVLC-based systems constitutes a trade-off between the increased error resilience of the TC-based scheme and the reduced bandwidth requirement of the RVLC-based scheme
Optimization of Information Rate Upper and Lower Bounds for Channels with Memory
We consider the problem of minimizing upper bounds and maximizing lower
bounds on information rates of stationary and ergodic discrete-time channels
with memory. The channels we consider can have a finite number of states, such
as partial response channels, or they can have an infinite state-space, such as
time-varying fading channels. We optimize recently-proposed information rate
bounds for such channels, which make use of auxiliary finite-state machine
channels (FSMCs). Our main contribution in this paper is to provide iterative
expectation-maximization (EM) type algorithms to optimize the parameters of the
auxiliary FSMC to tighten these bounds. We provide an explicit, iterative
algorithm that improves the upper bound at each iteration. We also provide an
effective method for iteratively optimizing the lower bound. To demonstrate the
effectiveness of our algorithms, we provide several examples of partial
response and fading channels, where the proposed optimization techniques
significantly tighten the initial upper and lower bounds. Finally, we compare
our results with an improved variation of the \emph{simplex} local optimization
algorithm, called \emph{Soblex}. This comparison shows that our proposed
algorithms are superior to the Soblex method, both in terms of robustness in
finding the tightest bounds and in computational efficiency. Interestingly,
from a channel coding/decoding perspective, optimizing the lower bound is
related to increasing the achievable mismatched information rate, i.e., the
information rate of a communication system where the decoder at the receiver is
matched to the auxiliary channel, and not to the original channel.Comment: Submitted to IEEE Transactions on Information Theory, November 24,
200
Precoder-Aided Iterative Detection Assisted Multilevel Coding and Three-Dimensional EXIT-Chart Analysis
A novel three-dimensional (3D) EXIT chart is developed for investigating the iterative behaviour of Multilevel Coding (MLC) invoking Multistage Decoding (MSD). The extrinsic information transfer characteristics of both the symbol-to-bit demapper used and those of the differentprotection constituent decoders suggest that potential improvements can be achieved by appropriately designing the demapper. The proposed 3D EXIT chart is then invoked for studying the precoder-aided multilevel coding scheme employing both MSD and Parallel Independent Decoding (PID) for communicating over AWGN and uncorrelated Rayleigh fading channels with the aid of 8PSK modulation. At BER=10?5, the precoder was capable of enhancing the achievable Eb/N0 performance by 0.5dB to 2.5dB over AWGN and Rayleigh channels, respectively
Turbo Decoding and Detection for Wireless Applications
A historical perspective of turbo coding and turbo transceivers inspired by the generic turbo principles is provided, as it evolved from Shannon’s visionary predictions. More specifically, we commence by discussing the turbo principles, which have been shown to be capable of performing close to Shannon’s capacity limit. We continue by reviewing the classic maximum a posteriori probability decoder. These discussions are followed by studying the effect of a range of system parameters in a systematic fashion, in order to gauge their performance ramifications. In the second part of this treatise, we focus our attention on the family of iterative receivers designed for wireless communication systems, which were partly inspired by the invention of turbo codes. More specifically, the family of iteratively detected joint coding and modulation schemes, turbo equalization, concatenated spacetime and channel coding arrangements, as well as multi-user detection and three-stage multimedia systems are highlighted
A co-designed equalization, modulation, and coding scheme
The commercial impact and technical success of Trellis Coded Modulation seems to illustrate that, if Shannon's capacity is going to be neared, the modulation and coding of an analogue signal ought to be viewed as an integrated process. More recent work has focused on going beyond the gains obtained for Average White Gaussian Noise and has tried to combine the coding/modulation with adaptive equalization. The motive is to gain similar advances on less perfect or idealized channels
- …