17,410 research outputs found
Design of a ROIC for scanning type HgCdTe LWIR focal plane arrays
Design of a silicon readout integrated circuit (ROIC) for LWIR HgCdTe Focal Plane is presented. ROIC incorporates time delay integration (TDI) functionality over seven elements with a supersampling rate of three, increasing SNR and
the spatial resolution. Novelty of this topology is inside TDI stage; integration of charges in TDI stage implemented in current domain by using switched current structures that reduces required area for chip and improves linearity performance. ROIC, in terms of functionality, is capable of bidirectional scan, programmable integration time and 5 gain settings at the input. Programming can be done parallel or serially with digital interface. ROIC can handle up to 3.5V dynamic range with the input stage to be direct injection (DI) type. With the load being 10pF capacitive in parallel with 1MΩ resistance, output settling time is less than 250nsec enabling the clock frequency up to 4MHz. The manufacturing technology is 0.35μm, double poly-Si, four-metal (3 metals and 1 top metal) 5V CMOS process
Realization of a ROIC for 72x4 PV-IR detectors
Silicon Readout Integrated Circuits (ROIC) for HgCdTe Focal Plane Arrays of 1x4 and 72x4 photovoltaic detectors are represented. The analog circuit blocks are completely identical for both, while the digital control circuit is modified to
take into account the larger array size. The manufacturing technology is 0.35μm, double poly-Si, three-metal CMOS process. ROIC structure includes four elements TDI functioning with a super sampling rate of 3, bidirectional scanning, dead pixel de-selection, automatic gain adjustment in response to pixel deselection besides programmable four gain setting (up to 2.58pC storage), and programmable integration time. ROIC has four outputs with a dynamic range of 2.8V (from 1.2V to 4V) for an output load of 10pF capacitive in parallel with 1MΩ resistance, and operates at a clock frequency of 5 MHz. The input referred noise is less than 1037 μV with 460 fF integration capacitor, corresponding to 2978 electrons
A closed-loop digitally controlled MEMS gyroscope with unconstrained Sigma-Delta force-feedback
In this paper, we describe the system architecture and prototype measurements of a MEMS gyroscope system with a resolution of 0.025 degrees/s/root Hz. The architecture makes extensive use of control loops, which are mostly in the digital domain. For the primary mode both the amplitude and the resonance frequency are tracked and controlled. The secondary mode readout is based on unconstrained Sigma Delta force-feedback, which does not require a compensation filter in the loop and thus allows more beneficial quantization noise shaping than prior designs of the same order. Due to the force-feedback, the gyroscope has ample dynamic range to correct the quadrature error in the digital domain. The largely digital setup also gives a lot of flexibility in characterization and testing, where system identification techniques have been used to characterize the sensors. This way, a parasitic direct electrical coupling between actuation and readout of the mass-spring systems was estimated and corrected in the digital domain. Special care is also given to the capacitive readout circuit, which operates in continuous time
Reconfigurable nanoelectronics using graphene based spintronic logic gates
This paper presents a novel design concept for spintronic nanoelectronics
that emphasizes a seamless integration of spin-based memory and logic circuits.
The building blocks are magneto-logic gates based on a hybrid
graphene/ferromagnet material system. We use network search engines as a
technology demonstration vehicle and present a spin-based circuit design with
smaller area, faster speed, and lower energy consumption than the
state-of-the-art CMOS counterparts. This design can also be applied in
applications such as data compression, coding and image recognition. In the
proposed scheme, over 100 spin-based logic operations are carried out before
any need for a spin-charge conversion. Consequently, supporting CMOS
electronics requires little power consumption. The spintronic-CMOS integrated
system can be implemented on a single 3-D chip. These nonvolatile logic
circuits hold potential for a paradigm shift in computing applications.Comment: 14 pages (single column), 6 figure
- …