Impact testing machine Patent

Impact testing machine for imparting large impact forces on high velocity package

Procedure for Impact Testing of Fused Recycled Glass

Recycled glass material is made from hundred percent recycled bottle glass and consume less energy than re-melt technology. It also uses no additives in the manufacturing process allowing the recycled glass material, in principal, to go back to the recycling stream after end-of-use, contributing to the circular economy with a low ecological impact. Previous research with low temperature fused recycled bottle glass was developed for the manufacturing of interior tiles and commissioned by an architectural practice for a new build which was based on sustainable principles. The research considered objective mechanical criteria such as flexural bending strength, stability and stain and scratch resistance. It also emphasized on aesthetic development such as colouring, translucency, texture and reproducibility. Continuing from previous research results the material is believed to behold properties in which it can be used for other architectural applications such as pavements, wall cladding, or even non-structural furniture. This is a relatively new architectural material of which there has been little publications in material specifications or processes for mechanical testing. The aim of this paper is to investigate the procedure for testing the recycled glass material for impact resistance, so it can be applied to pavements and other surfaces which are at risk of impact during service. A review of different impact test procedures for construction materials was undertaken, comparing methodologies and international standards applied to other materials such as natural stone, ceramics and glass. A new drop weight impact testing machine was designed and manufactured in-house to perform these tests. As a case study, samples of the recycled glass material were manufactured with two different thicknesses and tested. The impact energy was calculated theoretically, obtaining results with 5 and 10 Joules. The results on the material were subsequently discussed. Improvements on the procedure can be made using high speed video technology to calculate velocity just before and immediately after the impact to know the absorbed energy. The initial results obtained in this procedure were positive although repeatability needs to be developed to obtain a correlation of results and finally be able to validate the procedure. The experiment with samples showed the practicality of this procedure and application to the recycled glass material impact testing although further research needs to be developed

Penetration impact testing of self-reinforced composites

Penetration impact resistance is one of the key advantages of self-reinforced composites. This is typically measured using the same setup as for brittle fibre composites. However, issues with the test configuration for falling weight impact tests are reported. Similar issues have been found in literature for other composites incorporating ductile fibres. If the dimensions of the test samples are too small relative to the clamping device, then the test samples can heavily deform by wrinkling and necking. These unwanted mechanisms should be avoided as they absorb additional energy compared to properly tested samples. Furthermore, these mechanisms are found to occur more easily at lower compaction temperatures due to the lower interlayer bonding. In conclusions, the sample dimensions of ductile fibre composites should be carefully selected for penetration impact testing. If wrinkling or necking is observed, then the sample dimensions need to be increased.publisher: Elsevier articletitle: Penetration impact testing of self-reinforced composites journaltitle: Composites Part A: Applied Science and Manufacturing articlelink: http://dx.doi.org/10.1016/j.compositesa.2014.10.012 content_type: article copyright: Copyright © 2014 Elsevier Ltd. All rights reserved.status: publishe

The Impact of IPv6 on Penetration Testing

In this paper we discuss the impact the use of IPv6 has on remote penetration testing of servers and web applications. Several modifications to the penetration testing process are proposed to accommodate IPv6. Among these modifications are ways of performing fragmentation attacks, host discovery and brute-force protection. We also propose new checks for IPv6-specific vulnerabilities, such as bypassing firewalls using extension headers and reaching internal hosts through available transition mechanisms. The changes to the penetration testing process proposed in this paper can be used by security companies to make their penetration testing process applicable to IPv6 targets

Impact testing of welded samples

The objective of this paper is to demonstrate how welding practice and joint design affect the performance of the joint. Also demonstrated is the importance of weld inspection to ensure quality welds

A portable load cell for in-situ ore impact breakage testing

This paper discusses the design and characterisation of a short, and hence portable impact load cell for in-situ quantification of ore breakage properties under impact loading conditions. Much literature has been published in the past two decades about impact load cells for ore breakage testing. It has been conclusively shown that such machines yield significant quantitative energy-fragmentation information about industrial ores. However, documented load cells are all laboratory systems that are not adapted for in-situ testing due to their dimensions and operating requirements. The authors report on a new portable impact load cell designed specifically for in-situ testing. The load cell is 1.5 m in height and weighs 30 kg. Its physical and operating characteristics are detailed in the paper. This includes physical dimensions, calibration and signal deconvolution. Emphasis is placed on the deconvolution issue, which is significant for such a short load cell. Finally, it is conclusively shown that the short load cell is quantitatively as accurate as its larger laboratory analogues

Attitudes Toward Updated Genetic Testing Among Patients with Unexplained Mismatch Repair Deficiency

Individuals who have colorectal cancer (CRC) or endometrial cancer (EC) displaying loss of immunohistochemical (IHC) staining of one or more mismatch repair (MMR) proteins without a causative germline mutation are said to have unexplained mismatch repair deficiency (UMMRD, also known as mutation-negative Lynch syndrome). Comprehensive genetic testing that could potentially further clarify Lynch syndrome (LS) carrier status is essential to provide tailored screening guidelines to affected individuals and their family members; however, patient understanding of the potential impact of updated genetic testing for LS is unclear. This study aimed to evaluate the interest in and perceived impact of updated genetic testing among individuals with UMMRD at a tertiary academic center. A survey evaluating interest in updated genetic testing was mailed to 98 potential participants, and an electronic health record review was completed for the 31 individuals who returned the survey. Results indicate that this population is highly interested in updated genetic testing, and their perceived impact is primarily for family members to have appropriate testing and screening options. Updated risk assessment and genetic counseling, along with a discussion of the benefits and limitations of genetic testing, is essential as the understanding of potential causes of UMMRD evolves. Updated genetic counseling may allow patients with UMMRD to better understand the interpretation of their tumor and germline testing, as well as the impact of comprehensive genetic testing for themselves and their family members

Are there any winners in high-stakes mathematics testing? A qualitative case study exploring student, parent and teacher attitudes towards NAPLAN numeracy tests in years 3 and 5

Through the annual implementaion of National Assessment Program - Literacy and Numeracy (NAPLAN), testing of mathematical standards across Australia invokes questions about the impact that high-stakes testing has for the teaching and learning of mathematics. According to recent studies on high-stakes testing, the role of the teacher is instrumental in children\u27s achievement results. The purpose of this case study is to explore perspectives about NAPLAN from key participants at one Western Australian Primary School, namely: students, teachers, and parents. The paper will report on the extent to which instructional pedagogy at one school has been affected by the implementation of NAPLAN testing and subsequent publication of results. Consistent with a phenomenological perspective, the qualitative data for this investigation were collected through semi-structured interviews and field notes. These data offered particular insights into how key participants viewed the impact of NAPLAN testing has had on the instructional pedagogy in Year 3 and Year 5 classrooms

FOD impact testing of composite fan blades

The results of impact tests on large, fiber composite fan blades for aircraft turbofan engine applications are discussed. Solid composite blades of two different sizes and designs were tested. Both graphite/epoxy and boron/epoxy were evaluated. In addition, a spar-shell blade design was tested that had a boron/epoxy shell bonded to a titanium spar. All blades were tested one at a time in a rotating arm rig to simulate engine operating conditions. Impacting media included small gravel, two inch diameter ice balls, gelatin and RTV foam-simulated birds, as well as starlings and pigeons. The results showed little difference in performance between the graphite and boron/epoxy blades. The results also indicate that composite blades may be able to tolerate ice ball and small bird impacts but need improvement to tolerate birds in the small duck and larger category