Enabling Technologies for Ultra-Reliable and Low Latency Communications: From PHY and MAC Layer Perspectives

© 1998-2012 IEEE. Future 5th generation networks are expected to enable three key services-enhanced mobile broadband, massive machine type communications and ultra-reliable and low latency communications (URLLC). As per the 3rd generation partnership project URLLC requirements, it is expected that the reliability of one transmission of a 32 byte packet will be at least 99.999% and the latency will be at most 1 ms. This unprecedented level of reliability and latency will yield various new applications, such as smart grids, industrial automation and intelligent transport systems. In this survey we present potential future URLLC applications, and summarize the corresponding reliability and latency requirements. We provide a comprehensive discussion on physical (PHY) and medium access control (MAC) layer techniques that enable URLLC, addressing both licensed and unlicensed bands. This paper evaluates the relevant PHY and MAC techniques for their ability to improve the reliability and reduce the latency. We identify that enabling long-term evolution to coexist in the unlicensed spectrum is also a potential enabler of URLLC in the unlicensed band, and provide numerical evaluations. Lastly, this paper discusses the potential future research directions and challenges in achieving the URLLC requirements

Achieving reliable and enhanced communication in vehicular ad hoc networks (VANETs)

A thesis submitted to the University of Bedfordshire in partial fulfilment of the requirement for the degree of Doctor of PhilosophyWith the envisioned age of Internet of Things (IoTs), different aspects of Intelligent Transportation System (ITS) will be linked so as to advance road transportation safety, ease congestion of road traffic, lessen air pollution, improve passenger transportation comfort and significantly reduce road accidents. In vehicular networks, regular exchange of current position, direction, speed, etc., enable mobile vehicle to foresee an imminent vehicle accident and notify the driver early enough in order to take appropriate action(s) or the vehicle on its own may take adequate preventive measures to avert the looming accident. Actualizing this concept requires use of shared media access protocol that is capable of guaranteeing reliable and timely broadcast of safety messages. This dissertation investigates the use of Network Coding (NC) techniques to enrich the content of each transmission and ensure improved high reliability of the broadcasted safety messages with less number of retransmissions. A Code Aided Retransmission-based Error Recovery (CARER) protocol is proposed. In order to avoid broadcast storm problem, a rebroadcasting vehicle selection metric η, is developed, which is used to select a vehicle that will rebroadcast the received encoded message. Although the proposed CARER protocol demonstrates an impressive performance, the level of incurred overhead is fairly high due to the use of complex rebroadcasting vehicle selection metric. To resolve this issue, a Random Network Coding (RNC) and vehicle clustering based vehicular communication scheme with low algorithmic complexity, named Reliable and Enhanced Cooperative Cross-layer MAC (RECMAC) scheme, is proposed. The use of this clustering technique enables RECMAC to subdivide the vehicular network into small manageable, coordinated clusters which further improve transmission reliability and minimise negative impact of network overhead. Similarly, a Cluster Head (CH) selection metric ℱ(\u1d457) is designed, which is used to determine and select the most suitably qualified candidate to become the CH of a particular cluster. Finally, in order to investigate the impact of available radio spectral resource, an in-depth study of the required amount of spectrum sufficient to support high transmission reliability and minimum latency requirements of critical road safety messages in vehicular networks was carried out. The performance of the proposed schemes was clearly shown with detailed theoretical analysis and was further validated with simulation experiments

Robust distributed resource allocation for cellular vehicle-to-vehicle communication

Mit Release 14 des LTE Standards unterstützt dieser die direkte Fahrzeug-zu-Fahrzeug-Kommunikation über den Sidelink. Diese Dissertation beschäftigt sich mit dem Scheduling Modus 4, einem verteilten MAC-Protokoll ohne Involvierung der Basisstation, das auf periodischer Wiederverwendung von Funkressourcen aufbaut. Der Stand der Technik und eine eigene Analyse des Protokolls decken verschiedene Probleme auf. So wiederholen sich Kollisionen von Paketen, wodurch manche Fahrzeuge für längere Zeit keine sicherheitskritischen Informationen verbreiten können. Kollisionen entstehen vermehrt auch dadurch, dass Hidden-Terminal-Probleme in Kauf genommen werden oder veränderliche Paketgrößen und -raten schlecht unterstützt werden. Deshalb wird ein Ansatz namens "Scheduling based on Acknowledgement Feedback Exchange" vorgeschlagen. Zunächst wird eine Funkreservierung in mehrere ineinander verschachtelte Unter-Reservierungen mit verschiedenen Funkressourcen unterteilt, was die Robustheit gegenüber wiederholenden Kollisionen erhöht. Dies ist die Grundlage für eine verteilte Staukontrolle, die die Periodizitätseigenschaft nicht verletzt. Außerdem können so veränderliche Paketgrößen oder -raten besser abgebildet werden. Durch die periodische Wiederverwendung können Acknowledgements für Funkressourcen statt für Pakete ausgesendet werden. Diese können in einer Bitmap in den Padding-Bits übertragen werden. Mittels der Einbeziehung dieser Informationen bei der Auswahl von Funkressourcen können Hidden-Terminal-Probleme effizient vermieden werden, da die Acknowledgements auch eine Verwendung dieser Funkressource ankündigen. Kollisionen können nun entdeckt und eine Wiederholung vermieden werden. Die Evaluierung des neuen MAC-Protokolls wurde zum großen Teil mittels diskreter-Event-Simulationen durchgeführt, wobei die Bewegung jedes einzelnen Fahrzeuges simuliert wurde. Der vorgeschlagene Ansatz führt zu einer deutlich erhöhten Paketzustellrate. Die Verwendung einer anwendungsbezogenen Awareness-Metrik zeigt, dass die Zuverlässigkeit der Kommunikation durch den Ansatz deutlich verbessert werden kann. Somit zeigt sich der präsentierte Ansatz als vielversprechende Lösung für die erheblichen Probleme, die der LTE Modus 4 mit sich bringt.The LTE Standard added support for a direct vehicle-to-vehicle communication via the Sidelink with Release 14. This dissertation focuses on the scheduling Mode 4, a distributed MAC protocol without involvement of the base station, which requires the periodic reuse of radio resources. The state of the art and a own analysis of this protocol unveil multiple problems. For example, packet collisions repeat in time, so that some vehicles are unable to distribute safety-critical information for extended periods of time. Collisions also arise due to the hidden-terminal problem, which is simply put up with in Mode 4. Additionally, varying packet sizes or rates can hardly be supported. Consequently, an approach called "Scheduling based on Acknowledgement Feedback Exchange" is proposed. Firstly, a reservation of radio resources is split into multiple, interleaved sub-reservations that use different radio resources. This increases the robustness against repeating collisions. It is also the basis for a distributed congestion control that does not violate the periodicity. Moreover, different packet rates or sizes can be supported. The periodic reuse of radio resources enables the transmission of acknowledgements for radio resources instead of packets. These can be transmitted in a bitmap inside the padding bits. Hidden-terminal problems can be mitigated by considering the acknowledgements when selecting radio resources as they announce the use of these radio resources. Collisions can also be detected and prevented from re-occurring. The evaluation of the MAC protocol is mostly performed using discrete-event simulations, which model the movement of every single vehicle. The presented approach leads to a clear improvement of the packet delivery rate. The use of an application-oriented metric shows that the communication robustness can be improved distinctly. The proposed approach hence presents itself as a promising solution for the considerable problems of LTE Mode 4

Controlo de acesso ao meio em comunicações veiculares de tempo-real

Despite several preventive measures, the number of roadway accidents is still very high, being considered even a problem of public health by some entities. This thesis has as global purpose of contributing to the reduction of that number of accidents, and consequent fatalities, by using safety-related applications that use communication among vehicles. In particular, the primary goal is guaranteeing that communication between users in vehicular environments is done with appropriate time bounds to transfer safety-critical information. In detail, it is studied how to manage the scheduling of message’s transmissions (medium access control - MAC), in order to define precisely who will communicate and when is the appropriate instant. The preferable situation where a communication infrastructure is present with full coverage (RSUs) is also studied, from which medium access control is defined precisely, and vehicles (OBUs) become aware of medium utilization. Also, sporadic situations (e.g., absence of RSUs) are studied in which the communication network is “ad hoc” and solely formed by the current vehicles. It is used the recently WAVE / IEEE 802.11p standard, specific for vehicular communications, and it is proposed a TDMA based solution, with appropriate coordination between RSUs in order to effectively disseminate a critical safety event. It is taken into account two different ways of choosing the instant for the initial broadcast, and both cases are compared. In case there is no infrastructure available, methods are derived to minimize communication medium access collisions, and to maximize the available bandwidth. The results reflect the total end-to-end delay, and show that adequate times are attained, and meet with the requisites for the type of applications being considered. Also, enhancements are obtained when using the alternate choice for the initial broadcast instant.Apesar de diversas medidas preventivas, o número de acidentes rodoviários continua a ser muito elevado, sendo mesmo considerado uma questão de saúde pública por algumas entidades. Esta tese tem como objetivo geral contribuir para a redução desse número de acidentes, e consequentes fatalidades, através da utilização de aplicações de segurança que envolvem comunicação entre veículos. Em particular, o objetivo principal é garantir que a comunicação entre utentes, em ambientes veiculares, seja efetuada com limites temporais apropriados à transferência de informações críticas. De forma mais detalhada, é estudada a gestão do escalonamento das transmissões (controlo de acesso ao meio – MAC) que irá definir quem vai comunicar e quando o pode fazer. São estudadas situações (desejadas) onde há uma infra-estrutura de comunicações com cobertura integral (RSUs), a partir da qual se faz a coordenação do acesso ao meio pelos veículos (OBUs), e situações (esporádicas, por ausência de RSU) em que a rede de comunicação é “ad hoc” e apenas constituída pelos veículos presentes. Utiliza-se a recente norma WAVE / IEEE 802.11p, específica para comunicações veiculares, e propõe-se uma solução baseada em TDMA, com coordenação apropriada entre RSUs para disseminação efetiva de um evento crítico de segurança. A escolha do instante para o broadcast inicial do evento de segurança também é tida em conta, e são comparados dois casos distintos. No caso da ausência de infraestrutura, derivam-se métodos para minimizar colisões no acesso ao meio de comunicação, e maximizar a largura de banda disponível. Os resultados refletem o atraso total end-to-end, mostrando tempos apropriados para os requisitos das aplicações em causa, e evidenciando melhorias aquando da escolha alternativa para o instante do broadcast inicial.Programa Doutoral em Engenharia Eletrotécnic

Software Defined Network-Based Multi-Access Edge Framework for Vehicular Networks

The authors are grateful to the Deanship of Scientific Research at King Saud University for funding this work through Vice Deanship of Scientific Research Chairs: Chair of Pervasive and Mobile Computing.Peer reviewe

Dual protocol performance using WiFi and ZigBee for industrial WLAN

The purpose of this thesis is to study the performance of a WNCS based on utilizing IEEE 802.15.4 and IEEE 802.11 in meeting industrial requirements as well as the extent of improvement on the network level in terms of latency and interference tolerance when using the two different protocols, namely WiFi and ZigBee, in parallel. The study evaluates the optimum performance of WNCS that utilizes only IEEE 802.15.4 protocol (which ZigBee is based on) without modifications as an alternative that is low cost and low power compared to other wireless technologies. The study also evaluates the optimum performance of WNCS that utilizes only the IEEE 802.11 protocol (WiFi) without modifications as a high bit network. OMNeT++ simulations are used to measure the end-to-end delay and packet loss from the sensors to the controller and from the controller to the actuators. It is demonstrated that the measured delay of the proposed WNCS including all types of transmission, encapsulation, de-capsulation, queuing and propagation, meet real-time control network requirements while guaranteeing correct packet reception with no packet loss. Moreover, it is shown that the demonstrated performance of the proposed WNCS operating redundantly on both networks in parallel is significantly superior to a WNCS operating on either a totally wireless ZigBee or WiFi network individually in terms of measured delay and interference tolerance. This proposed WNCS demonstrates the combined advantages of both the IEEE 802.15.4 protocol (which ZigBee is based on) without modifications being low cost and low power compared to other wireless technologies as well the advantages of the IEEE 802.11 protocol (WiFi) being increased bit rate and higher immunity to interference. All results presented in this study were based on a 95% confidence analysis

Interface Selection in 5G vehicular networks

ITA Negli ultimi anni, la quantità di dati condivisa nel mondo è aumentata esponenzialmente grazie alle applicazioni innovative che riguardano la sicurezza (e.g. domotica, smart cities, controllo del traffico stradale, veicoli autonomi) e i servizi di intrattenimento (e.g. audio e video streaming, ricerche web, videogiochi online di massa). Per supportare questo trend, le principali compagnie nell’industria delle telecomunicazioni stanno sviluppando nuovi standard che saranno disponibili agli utenti finali nei prossimi anni e che saranno presentati come la Quinta Generazione di Reti Cellulari (5G). Questi standard prevedono miglioramenti ai precedenti standard 4G (e.g. LTE, WiMax, DSRC) e tecnologie completamente nuove (e.g. onde millimetriche, comunicazione con luce visibile) per permettere la diffusione di nuovi servizi che richiedono un throughput estremamente alto e una latency bassa. Nella maggior parte dei casi, queste tecnologie dovranno cooperare per assicurare una rete affidabile e accessibile in ogni situazione. Una delle applicazioni più promettenti di questa nuova generazione di tecnologie sono le reti veicolari, un insieme di servizi che includono la comunicazione con le infrastrutture, come il download di un film da Internet o la ricezione di informazioni riguardanti l’ambiente circostante (e.g. un semaforo manda un messaggio a un veicolo in avvicinamento per farlo fermare), o la comunicazione direttamente tra veicoli, in questo caso il datarate è tipicamente più basso dato che l’uso più tipico sarà, per esempio, mandare informazioni riguardanti le macchine più vicine per fare in modo di diminuore il numero di incidenti stradali o gestire il traffico. Questa tesi è focalizzata sulle applicazioni per reti veicolari, l’obiettivo è di analizzare le prestazioni del protocollo IEEE 802.11p a diversi datarate in un tipico scenario V2V, e di confrontare LTE e mmWaves usando una comunicazione V2I in diverse circostanze, per mostrare come ogni tecnologia offra vantaggi per determinate applicazioni mentre non è adatta per altre. ENG In the last years, the amount of data shared among the world is increased exponentially thanks to the novel applications for security (e.g. home automation, smart cities, traffic control, autonomous vehicles) and infotainment (e.g. audio and video streaming, web browsing, massive online videogames). To support this trend, the major companies in the telecommunication industry are developing new standards that will be available to the final users in the next years and that will be presented as the Fifth Generation of Cellular Networks (5G). These standards provide improvements to the 4G standards (e.g. LTE, WiMax, DSRC) and brand new technologies (e.g. mmWaves, Visible Light Communication) to enable new services that demand extremely high throughput and low latency. In most cases these technologies will cooperate to ensure a reliable and accessible network in every situation. One of the most promising applications of these new generation technologies is vehicular networks, a set of services that includes the communication with infrastructures, such as the download of a film from the Internet or the reception of information about the surrounding environment (e.g. a traffic light sends a message to an incoming vehicle to make it stop), or the communication between vehicles, in this case the datarate is tipically lower since the typical use will be, for example, to send information about the closest cars in order to decrease the number of accidents or to manage the traffic. This thesis is focalized on the vehicular networks applications, it aims to analyze the performance of IEEE 802.11p protocol at different datarates in a typical V2V scenario, and to compare LTE and mmWaves using a V2I communication in different circumstances to show how each technology offers advantages for some applications while is not suitable for others