Low-Power Appliance Monitoring Using Factorial Hidden Markov Models

To optimize the energy utilization, intelligent energy management solutions require appliance-specific consumption statistics. One can obtain such information by deploying smart power outlets on every device of interest, however it incurs extra hardware cost and installation complexity. Alternatively, a single sensor can be used to measure total electricity consumption and thereafter disaggregation algorithms can be applied to obtain appliance specific usage information. In such a case, it is quite challenging to discern low-power appliances in the presence of high-power loads. To improve the recognition of low-power appliance states, we propose a solution that makes use of circuit-level power measurements. We examine the use of a specialized variant of Hidden Markov Model (HMM) known as Factorial HMM (FHMM) to recognize appliance specific load patterns from the aggregated power measurements. Further, we demonstrate that feature concatenation can improve the disaggregation performance of the model allowing it to identify device states with an accuracy of 90% for binary and 80% for multi-state appliances. Through experimental evaluations, we show that our solution performs better than the traditional event based approach. In addition, we develop a prototype system that allows real-time monitoring of appliance states

Robust energy disaggregation using appliance-specific temporal contextual information

An extension of the baseline non-intrusive load monitoring approach for energy disaggregation using temporal contextual information is presented in this paper. In detail, the proposed approach uses a two-stage disaggregation methodology with appliance-specific temporal contextual information in order to capture time-varying power consumption patterns in low-frequency datasets. The proposed methodology was evaluated using datasets of different sampling frequency, number and type of appliances. When employing appliance-specific temporal contextual information, an improvement of 1.5% up to 7.3% was observed. With the two-stage disaggregation architecture and using appliance-specific temporal contextual information, the overall energy disaggregation accuracy was further improved across all evaluated datasets with the maximum observed improvement, in terms of absolute increase of accuracy, being equal to 6.8%, thus resulting in a maximum total energy disaggregation accuracy improvement equal to 10.0%.Peer reviewedFinal Published versio

A comparison of generative and discriminative appliance recognition models for load monitoring

Appliance-level Load Monitoring (ALM) is essential, not only to optimize energy utilization, but also to promote energy awareness amongst consumers through real-time feedback mechanisms. Non-intrusive load monitoring is an attractive method to perform ALM that allows tracking of appliance states within the aggregated power measurements. It makes use of generative and discriminative machine learning models to perform load identification. However, particularly for low-power appliances, these algorithms achieve sub-optimal performance in a real world environment due to ambiguous overlapping of appliance power features. In our work, we report a performance comparison of generative and discriminative Appliance Recognition (AR) models for binary and multi-state appliance operations. Furthermore, it has been shown through experimental evaluations that a significant performance improvement in AR can be achieved if we make use of acoustic information generated as a by-product of appliance activity. We demonstrate that our a discriminative model FF-AR trained using a hybrid feature set which is a catenation of audio and power features improves the multi-state AR accuracy up to 10 %, in comparison to a generative FHMM-AR model

Statistical and Electrical Features Evaluation for Electrical Appliances Energy Disaggregation

In this paper we evaluate several well-known and widely used machine learning algorithms for regression in the energy disaggregation task. Specifically, the Non-Intrusive Load Monitoring approach was considered and the K-Nearest-Neighbours, Support Vector Machines, Deep Neural Networks and Random Forest algorithms were evaluated across five datasets using seven different sets of statistical and electrical features. The experimental results demonstrated the importance of selecting both appropriate features and regression algorithms. Analysis on device level showed that linear devices can be disaggregated using statistical features, while for non-linear devices the use of electrical features significantly improves the disaggregation accuracy, as non-linear appliances have non-sinusoidal current draw and thus cannot be well parametrized only by their active power consumption. The best performance in terms of energy disaggregation accuracy was achieved by the Random Forest regression algorithm.Peer reviewedFinal Published versio

Energy Disaggregation Using Elastic Matching Algorithms

© 2020 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (http://creativecommons.org/licenses/by/4.0/)In this article an energy disaggregation architecture using elastic matching algorithms is presented. The architecture uses a database of reference energy consumption signatures and compares them with incoming energy consumption frames using template matching. In contrast to machine learning-based approaches which require significant amount of data to train a model, elastic matching-based approaches do not have a model training process but perform recognition using template matching. Five different elastic matching algorithms were evaluated across different datasets and the experimental results showed that the minimum variance matching algorithm outperforms all other evaluated matching algorithms. The best performing minimum variance matching algorithm improved the energy disaggregation accuracy by 2.7% when compared to the baseline dynamic time warping algorithm.Peer reviewedFinal Published versio

Intrusive and Non-Intrusive Load Monitoring (A Survey)

There is not discussion about the need of energy conservation, it is well known that energy resources are limited moreover the global energy demands will double by the end of 2030, which certainly will bring implications on the environment and hence to all of us. Non-Intrusive load monitoring (NILM) is the process of recognize electrical devices and its energy consumption based on whole home electric signals, where this aggregated load data is acquired from a single point of measurement outside the household. The aim of this approach is to get optimal energy consumption and avoid energy wastage. Intrusive load monitoring (ILM) is the process of identify and locate single devices through the use of sensing systems to support control, monitor and intervention of such devices. The aim of this approach is to offer a base for the development of important applications for remote and automatic intervention of energy consumption inside buildings and homes as well.  Appliance discerns can be tackled using approaches from data mining and machine learning, finding out the techniques that fit the best this requirements, is a key factor for achieving feasible and suitable appliance load monitoring solutions. This paper presents common and interesting methods used. Privacy concerns have been one of the bigger obstacles for implementing a widespread adoption of these solutions. The implementation of security over these approaches along with fine-grained energy monitoring would lead to a better public agreement of these solutions and hence a faster adoption of such approaches. This paper reveals a lack of security over these approaches with a real scenario. &nbsp