(Invited) mm-wave silicon ICs: An opportunity for holistic design

Millimeter-waves integrated circuits offer a unique opportunity for a holistic design approach encompassing RF, analog, and digital, as well as radiation and electromagnetics. The ability to deal with the complete system from the digital circuitry to on-chip antennas and everything in between offers unparalleled opportunities for completely new architectures and topologies, previously impossible due the traditional partitioning of various blocks in conventional design. This opens a plethora of new architectural and system level innovation within the integrated circuit platform. This paper reviews some of the challenges and opportunities for mm-wave ICs and presents several solutions to them

The Future of High Frequency Circuit Design

The cut-off wavelengths of integrated silicon transistors have exceeded the die sizes of the chips being fabricated with them. Combined with the ability to integrate billions of transistors on the same die, this size-wavelength cross-over has produced a unique opportunity for a completely new class of holistic circuit design combining electromagnetics, device physics, circuits, and communication system theory in one place. In this paper, we discuss some of these opportunities and their associated challenges in greater detail and provide a few of examples of how they can be used in practice

Phase noise analysis for a mm-wave VCO configuration

The letter highlights the importance of modelling the phase noise of an oscillator using the impulse sensitivity function. A Colpitts oscillator in the common collector configuration is analyzed to obtain an expression for its phase noise. The oscillator design is thus optimized for phase noise with respect to process and design parameters. The fabricated voltage controlled oscillator at an oscillating frequency of 52.8 GHz has a measured phase noise of -98.9 dBc/Hz at 1 MHz offset.http://onlinelibrary.wiley.com/journal/10.1002/(ISSN)1098-2760hb201

SiGe based multiple-phase VCO operating for mm-wave frequencies

The ever-increasing demand for higher speed in wireless consumer applications has increased the interest in the unlicensed spectrum of 7 GHz around 60 GHz. The high atmospheric oxygen absorption at 60 GHz and small size of the antennas at this frequency requires the use of integrated phased-array systems to overcome the deficiencies of lossy channels at these frequencies. The phased arrays combine signals from multiple paths to obtain higher receiver sensitivity and directivity. The system thus requires phase-shifted voltage-controlled oscillator (VCO) signals to implement phase shifting in the local-oscillator (LO) path. In this research, the vector sum method to generate various phases of the signal at 60 GHz was investigated for its suitability in phased-array systems. The main focus was on improving the phase noise performance of the VCO. The VCO was implemented using a fully differential common-collector Colpitts oscillator in the cascode configuration, which was found to be the VCO configuration with acceptable phase noise performance and stability in the millimetre-wave range. The research focus was on modelling the phase noise of the VCO, and was performed by identifying the impulse sensitivity function for various noise sources, followed by analysing its effect on the linear time varying (LTV) model of the oscillators. The analysis led to a closed-form expression for the phase noise of the oscillator in terms of process and design parameters. The design was then optimised in terms of identified parameters to attain minimum phase noise. The phase noise expression using LTV theory and SpectreRF simulations reported the same optimum value for the design parameter, of around 0.3 for the capacitor ratio. The simulation results utilising the vector sum phase shifting method to generate multiple phase oscillator signals suggest its suitability in implementing phased-array systems in the millimetre-wave range. The vector sum was realised by generating quadrature signals from the oscillator using hybrid couplers. Variable gain amplifiers (VGAs) based on Gilbert mixer topology were used to combine the in-phase and quadrature phase signals to generate the phase-shifted oscillator signal. The gains of the VGAs were linearised by using a pre-distortion circuit, which was an inverse tanh cell. A fully differential 60 GHz VCO was fabricated using a SiGe process with a fT of 200 GHz. The fabricated integrated circuit (IC) measured at the wafer level had a centre frequency of 52.8 GHz and a tuning range of 7 GHz. It demonstrated a phase noise performance of -98.9 dBc/Hz at 1 MHz offset and a power dissipation of 140 mW, thus providing a VCO figure of merit of 172 dBc/Hz. It delivered a differential output power of 8 dBm and the IC occupied an area of 0.54 mm2, including the bondpads. It was thus concluded that a 10 % design margin for the tuning range is required while using SiGe BiCMOS technology. The simulation results demonstrate that the VCO, along with an active interpolator, provides a range of phase-shifted signals from 0° to 360° in steps of 22.5° for various gain settings of the VGAs. The power dissipation of the active interpolator is around 60 mW and the system could thus be employed in LO path shifting architecture of the phased arrays with increased power consumption.Thesis (PhD)--University of Pretoria, 2013.Electrical, Electronic and Computer Engineeringunrestricte