A General Framework for Analyzing, Characterizing, and Implementing Spectrally Modulated, Spectrally Encoded Signals

Fourth generation (4G) communications will support many capabilities while providing universal, high speed access. One potential enabler for these capabilities is software defined radio (SDR). When controlled by cognitive radio (CR) principles, the required waveform diversity is achieved via a synergistic union called CR-based SDR. Research is rapidly progressing in SDR hardware and software venues, but current CR-based SDR research lacks the theoretical foundation and analytic framework to permit efficient implementation. This limitation is addressed here by introducing a general framework for analyzing, characterizing, and implementing spectrally modulated, spectrally encoded (SMSE) signals within CR-based SDR architectures. Given orthogonal frequency division multiplexing (OFDM) is a 4G candidate signal, OFDM-based signals are collectively classified as SMSE since modulation and encoding are spectrally applied. The proposed framework provides analytic commonality and unification of SMSE signals. Applicability is first shown for candidate 4G signals, and resultant analytic expressions agree with published results. Implementability is then demonstrated in multiple coexistence scenarios via modeling and simulation to reinforce practical utility

Performance of IEEE 802.11a wireless LAN standard over frequency-selective, slowly fading Nakagami channels in a pulsed jamming environment

Wireless local area networks (WLAN) are increasingly important in meeting the needs of the next generation broadband wireless communication systems for both commercial and military applications. In 1999, the Institute of the Electrical and Electronics Engineers (IEEE) 802.11a working group approved a standard for a 5 GHz band WLAN that supports a variable bit rate from 6 to 54 Mbps, and orthogonal frequency-division multiplexing (OFDM) was chosen because of its well-known ability to avoid multipath effects while achieving high data rates by combining a high order sub-carrier modulation with a high rate convolutional code. This thesis investigates the performance of the OFDM based IEEE.802.11a WLAN standard in frequency-selective, slowly fading Nakagami channels in a pulsed-noise jamming environment. Contrary to expectations, the signal-to-interference ratio (SIR) required to achieve a specific does not monotonically decrease when the bit rate decreases. Furthermore, the results show that the performance is improved significantly by adding convolutional coding with Viterbi decoding, and thus highlights the importance of forward error correction (FEC) coding to the performance of wireless communications systems.http://archive.org/details/performanceofiee109453638Lieutenant Junior Grade, Turkish NavyApproved for public release; distribution is unlimited

A Comprehensive Analysis of Literature Reported Mac and Phy Enhancements of Zigbee and its Alliances

Wireless communication is one of the most required technologies by the common man. The strength of this technology is rigorously progressing towards several novel directions in establishing personal wireless networks mounted over on low power consuming systems. The cutting-edge communication technologies like bluetooth, WIFI and ZigBee significantly play a prime role to cater the basic needs of any individual. ZigBee is one such evolutionary technology steadily getting its popularity in establishing personal wireless networks which is built on small and low-power digital radios. Zigbee defines the physical and MAC layers built on IEEE standard. This paper presents a comprehensive survey of literature reported MAC and PHY enhancements of ZigBee and its contemporary technologies with respect to performance, power consumption, scheduling, resource management and timing and address binding. The work also discusses on the areas of ZigBee MAC and PHY towards their design for specific applications

Condition monitoring through advanced sensor and computational technology : final report (January 2002 to May 2005).

The overall goal of this joint research project was to develop and demonstrate advanced sensors and computational technology for continuous monitoring of the condition of components, structures, and systems in advanced and next-generation nuclear power plants (NPPs). This project included investigating and adapting several advanced sensor technologies from Korean and US national laboratory research communities, some of which were developed and applied in non-nuclear industries. The project team investigated and developed sophisticated signal processing, noise reduction, and pattern recognition techniques and algorithms. The researchers installed sensors and conducted condition monitoring tests on two test loops, a check valve (an active component) and a piping elbow (a passive component), to demonstrate the feasibility of using advanced sensors and computational technology to achieve the project goal. Acoustic emission (AE) devices, optical fiber sensors, accelerometers, and ultrasonic transducers (UTs) were used to detect mechanical vibratory response of check valve and piping elbow in normal and degraded configurations. Chemical sensors were also installed to monitor the water chemistry in the piping elbow test loop. Analysis results of processed sensor data indicate that it is feasible to differentiate between the normal and degraded (with selected degradation mechanisms) configurations of these two components from the acquired sensor signals, but it is questionable that these methods can reliably identify the level and type of degradation. Additional research and development efforts are needed to refine the differentiation techniques and to reduce the level of uncertainties

Receiver design for nonlinearly distorted OFDM : signals applications in radio-over-fiber systems

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Universidade do Porto. Faculdade de Engenharia. 201