1,209 research outputs found
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
Electromagnetic Lens-focusing Antenna Enabled Massive MIMO: Performance Improvement and Cost Reduction
Massive multiple-input multiple-output (MIMO) techniques have been recently
advanced to tremendously improve the performance of wireless communication
networks. However, the use of very large antenna arrays at the base stations
(BSs) brings new issues, such as the significantly increased hardware and
signal processing costs. In order to reap the enormous gain of massive MIMO and
yet reduce its cost to an affordable level, this paper proposes a novel system
design by integrating an electromagnetic (EM) lens with the large antenna
array, termed the EM-lens enabled MIMO. The EM lens has the capability of
focusing the power of an incident wave to a small area of the antenna array,
while the location of the focal area varies with the angle of arrival (AoA) of
the wave. Therefore, in practical scenarios where the arriving signals from
geographically separated users have different AoAs, the EM-lens enabled system
provides two new benefits, namely energy focusing and spatial interference
rejection. By taking into account the effects of imperfect channel estimation
via pilot-assisted training, in this paper we analytically show that the
average received signal-to-noise ratio (SNR) in both the single-user and
multiuser uplink transmissions can be strictly improved by the EM-lens enabled
system. Furthermore, we demonstrate that the proposed design makes it possible
to considerably reduce the hardware and signal processing costs with only
slight degradations in performance. To this end, two complexity/cost reduction
schemes are proposed, which are small-MIMO processing with parallel receiver
filtering applied over subgroups of antennas to reduce the computational
complexity, and channel covariance based antenna selection to reduce the
required number of radio frequency (RF) chains. Numerical results are provided
to corroborate our analysis.Comment: 30 pages, 9 figure
Nuts and Bolts of a Realistic Stochastic Geometric Analysis of mmWave HetNets: Hardware Impairments and Channel Aging
© 2019 IEEE.Motivated by heterogeneous network (HetNet) design in improving coverage and by millimeter-wave (mmWave) transmission offering an abundance of extra spectrum, we present a general analytical framework shedding light on the downlink of realistic mmWave HetNets consisting of K tiers of randomly located base stations. Specifically, we model, by virtue of stochastic geometry tools, the multi-Tier multi-user (MU) multiple-input multiple-output (MIMO) mmWave network degraded by the inevitable residual additive transceiver hardware impairments (RATHIs) and channel aging. Given this setting, we derive the coverage probability and the area spectral efficiency (ASE), and we subsequently evaluate the impact of residual transceiver hardware impairments and channel aging on these metrics. Different path-loss laws for line-of-sight and non-line-of-sight are accounted for the analysis, which are among the distinguishing features of mmWave systems. Among the findings, we show that the RATHIs have a meaningful impact at the high-signal-To-noise-ratio regime, while the transmit additive distortion degrades further than the receive distortion the system performance. Moreover, serving fewer users proves to be preferable, and the more directive the mmWaves are, the higher the ASE becomes.Peer reviewedFinal Accepted Versio
Massive hybrid antenna array for millimeter-wave cellular communications
© 2002-2012 IEEE. A massive hybrid array consists of multiple analog subarrays, with each subarray having its digital processing chain. It offers the potential advantage of balancing cost and performance for massive arrays and therefore serves as an attractive solution for future millimeter-wave (mm- Wave) cellular communications. On one hand, using beamforming analog subarrays such as phased arrays, the hybrid configuration can effectively collect or distribute signal energy in sparse mm-Wave channels. On the other hand, multiple digital chains in the configuration provide multiplexing capability and more beamforming flexibility to the system. In this article, we discuss several important issues and the state-of-the-art development for mm-Wave hybrid arrays, such as channel modeling, capacity characterization, applications of various smart antenna techniques for single-user and multiuser communications, and practical hardware design. We investigate how the hybrid array architecture and special mm-Wave channel property can be exploited to design suboptimal but practical massive antenna array schemes. We also compare two main types of hybrid arrays, interleaved and localized arrays, and recommend that the localized array is a better option in terms of overall performance and hardware feasibility
- …