839 research outputs found
H2-ARQ-relaying: spectrum and energy efficiency perspectives
In this paper, we propose novel Hybrid Automatic Repeat re-Quest (HARQ) strategies used in conjunction with hybrid relaying schemes, named as H2-ARQ-Relaying. The strategies allow the relay to dynamically switch between amplify-and-forward/compress-and-forward and decode-and-forward schemes according to its decoding status. The performance analysis is conducted from both the spectrum and energy efficiency perspectives. The spectrum efficiency of the proposed strategies, in terms of the maximum throughput, is significantly improved compared with their non-hybrid counterparts under the same constraints. The consumed energy per bit is optimized by manipulating the node activation time, the transmission energy and the power allocation between the source and the relay. The circuitry energy consumption of all involved nodes is taken into consideration. Numerical results shed light on how and when the energy efficiency can be improved in cooperative HARQ. For instance, cooperative HARQ is shown to be energy efficient in long distance transmission only. Furthermore, we consider the fact that the compress-and-forward scheme requires instantaneous signal to noise ratios of all three constituent links. However, this requirement can be impractical in some cases. In this regard, we introduce an improved strategy where only partial and affordable channel state information feedback is needed
Relaying in the Internet of Things (IoT): A Survey
The deployment of relays between Internet of Things (IoT) end devices and gateways can improve link quality. In cellular-based IoT, relays have the potential to reduce base station overload. The energy expended in single-hop long-range communication can be reduced if relays listen to transmissions of end devices and forward these observations to gateways. However, incorporating relays into IoT networks faces some challenges. IoT end devices are designed primarily for uplink communication of small-sized observations toward the network; hence, opportunistically using end devices as relays needs a redesign of both the medium access control (MAC) layer protocol of such end devices and possible addition of new communication interfaces. Additionally, the wake-up time of IoT end devices needs to be synchronized with that of the relays. For cellular-based IoT, the possibility of using infrastructure relays exists, and noncellular IoT networks can leverage the presence of mobile devices for relaying, for example, in remote healthcare. However, the latter presents problems of incentivizing relay participation and managing the mobility of relays. Furthermore, although relays can increase the lifetime of IoT networks, deploying relays implies the need for additional batteries to power them. This can erode the energy efficiency gain that relays offer. Therefore, designing relay-assisted IoT networks that provide acceptable trade-offs is key, and this goes beyond adding an extra transmit RF chain to a relay-enabled IoT end device. There has been increasing research interest in IoT relaying, as demonstrated in the available literature. Works that consider these issues are surveyed in this paper to provide insight into the state of the art, provide design insights for network designers and motivate future research directions
A Simple Cooperative Diversity Method Based on Network Path Selection
Cooperative diversity has been recently proposed as a way to form virtual
antenna arrays that provide dramatic gains in slow fading wireless
environments. However most of the proposed solutions require distributed
space-time coding algorithms, the careful design of which is left for future
investigation if there is more than one cooperative relay. We propose a novel
scheme, that alleviates these problems and provides diversity gains on the
order of the number of relays in the network. Our scheme first selects the best
relay from a set of M available relays and then uses this best relay for
cooperation between the source and the destination. We develop and analyze a
distributed method to select the best relay that requires no topology
information and is based on local measurements of the instantaneous channel
conditions. This method also requires no explicit communication among the
relays. The success (or failure) to select the best available path depends on
the statistics of the wireless channel, and a methodology to evaluate
performance for any kind of wireless channel statistics, is provided.
Information theoretic analysis of outage probability shows that our scheme
achieves the same diversity-multiplexing tradeoff as achieved by more complex
protocols, where coordination and distributed space-time coding for M nodes is
required, such as those proposed in [7]. The simplicity of the technique,
allows for immediate implementation in existing radio hardware and its adoption
could provide for improved flexibility, reliability and efficiency in future 4G
wireless systems.Comment: To appear, IEEE JSAC, special issue on 4
Physical Layer Service Integration in 5G: Potentials and Challenges
High transmission rate and secure communication have been identified as the
key targets that need to be effectively addressed by fifth generation (5G)
wireless systems. In this context, the concept of physical-layer security
becomes attractive, as it can establish perfect security using only the
characteristics of wireless medium. Nonetheless, to further increase the
spectral efficiency, an emerging concept, termed physical-layer service
integration (PHY-SI), has been recognized as an effective means. Its basic idea
is to combine multiple coexisting services, i.e., multicast/broadcast service
and confidential service, into one integral service for one-time transmission
at the transmitter side. This article first provides a tutorial on typical
PHY-SI models. Furthermore, we propose some state-of-the-art solutions to
improve the overall performance of PHY-SI in certain important communication
scenarios. In particular, we highlight the extension of several concepts
borrowed from conventional single-service communications, such as artificial
noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These
techniques are shown to be effective in the design of reliable and robust
PHY-SI schemes. Finally, several potential research directions are identified
for future work.Comment: 12 pages, 7 figure
- …