An Integrated Optimization System for Safe Job Assignment Based on Human Factors and Behavior

Industrial safety has been deeply improved in the past years, thanks to increasingly sophisticated technologies. Nevertheless, 2.3 million people yearly die worldwide due to occupational illnesses and accidents at work. Human factors can be profitably used for safety improvement because of their influence on the workers’ behavior. This paper presents an integrated optimization system to help companies assign each task to the most suitable worker, minimizing cost, while maximizing expertise and safety. The system is made of three modules. A neural module computes each worker’s caution for every task on the basis of some human factors and the worker’s behavior. To solve the multiobjective job assignment problem, an evolutionary module approximates the Pareto front through the nondominated sorting genetic algorithm II. Pareto-optimal solutions then form the alternatives of a multicriteria decision-making problem, and the best is selected by a decision module jointly based on the analytic hierarchy process and the technique for order of preference by similarity to ideal solution. Validation was carried out involving two footwear companies, where personnel was recruited and reassigned to tasks, respectively. Comparing the worker-task assignment proposed by the system to the one suggested/used by the management, noteworthy low-cost improvement in safety is shown in both scenarios, with low or no decrease in expertise. The proposed system can, thus, contribute to get safer workplaces where risks are less likely and/or less harmful

AI and OR in management of operations: history and trends

The last decade has seen a considerable growth in the use of Artificial Intelligence (AI) for operations management with the aim of finding solutions to problems that are increasing in complexity and scale. This paper begins by setting the context for the survey through a historical perspective of OR and AI. An extensive survey of applications of AI techniques for operations management, covering a total of over 1200 papers published from 1995 to 2004 is then presented. The survey utilizes Elsevier's ScienceDirect database as a source. Hence, the survey may not cover all the relevant journals but includes a sufficiently wide range of publications to make it representative of the research in the field. The papers are categorized into four areas of operations management: (a) design, (b) scheduling, (c) process planning and control and (d) quality, maintenance and fault diagnosis. Each of the four areas is categorized in terms of the AI techniques used: genetic algorithms, case-based reasoning, knowledge-based systems, fuzzy logic and hybrid techniques. The trends over the last decade are identified, discussed with respect to expected trends and directions for future work suggested

Planning and Scheduling Optimization

Although planning and scheduling optimization have been explored in the literature for many years now, it still remains a hot topic in the current scientific research. The changing market trends, globalization, technical and technological progress, and sustainability considerations make it necessary to deal with new optimization challenges in modern manufacturing, engineering, and healthcare systems. This book provides an overview of the recent advances in different areas connected with operations research models and other applications of intelligent computing techniques used for planning and scheduling optimization. The wide range of theoretical and practical research findings reported in this book confirms that the planning and scheduling problem is a complex issue that is present in different industrial sectors and organizations and opens promising and dynamic perspectives of research and development

Computer aided process planning for multi-axis CNC machining using feature free polygonal CAD models

This dissertation provides new methods for the general area of Computer Aided Process Planning, often referred to as CAPP. It specifically focuses on 3 challenging problems in the area of multi-axis CNC machining process using feature free polygonal CAD models. The first research problem involves a new method for the rapid machining of Multi-Surface Parts. These types of parts typically have different requirements for each surface, for example, surface finish, accuracy, or functionality. The CAPP algorithms developed for this problem ensure the complete rapid machining of multi surface parts by providing better setup orientations to machine each surface. The second research problem is related to a new method for discrete multi-axis CNC machining of part models using feature free polygonal CAD models. This problem specifically considers a generic 3-axis CNC machining process for which CAPP algorithms are developed. These algorithms allow the rapid machining of a wide variety of parts with higher geometric accuracy by enabling access to visible surfaces through the choice of appropriate machine tool configurations (i.e. number of axes). The third research problem addresses challenges with geometric singularities that can occur when 2D slice models are used in process planning. The conversion from CAD to slice model results in the loss of model surface information, the consequence of which could be suboptimal or incorrect process planning. The algorithms developed here facilitate transfer of complete surface geometry information from CAD to slice models. The work of this dissertation will aid in developing the next generation of CAPP tools and result in lower cost and more accurately machined components

MakerFluidics: low cost microfluidics for synthetic biology

Recent advancements in multilayer, multicellular, genetic logic circuits often rely on manual intervention throughout the computation cycle and orthogonal signals for each chemical “wire”. These constraints can prevent genetic circuits from scaling. Microfluidic devices can be used to mitigate these constraints. However, continuous-flow microfluidics are largely designed through artisanal processes involving hand-drawing features and accomplishing design rule checks visually: processes that are also inextensible. Additionally, continuous-flow microfluidic routing is only a consideration during chip design and, once built, the routing structure becomes “frozen in silicon,” or for many microfluidic chips “frozen in polydimethylsiloxane (PDMS)”; any changes to fluid routing often require an entirely new device and control infrastructure. The cost of fabricating and controlling a new device is high in terms of time and money; attempts to reduce one cost measure are, generally, paid through increases in the other. This work has three main thrusts: to create a microfluidic fabrication framework, called MakerFluidics, that lowers the barrier to entry for designing and fabricating microfluidics in a manner amenable to automation; to prove this methodology can design, fabricate, and control complex and novel microfluidic devices; and to demonstrate the methodology can be used to solve biologically-relevant problems. Utilizing accessible technologies, rapid prototyping, and scalable design practices, the MakerFluidics framework has demonstrated its ability to design, fabricate and control novel, complex and scalable microfludic devices. This was proven through the development of a reconfigurable, continuous-flow routing fabric driven by a modular, scalable primitive called a transposer. In addition to creating complex microfluidic networks, MakerFluidics was deployed in support of cutting-edge, application-focused research at the Charles Stark Draper Laboratory. Informed by a design of experiments approach using the parametric rapid prototyping capabilities made possible by MakerFluidics, a plastic blood--bacteria separation device was optimized, demonstrating that the new device geometry can separate bacteria from blood while operating at 275% greater flow rate as well as reduce the power requirement by 82% for equivalent separation performance when compared to the state of the art. Ultimately, MakerFluidics demonstrated the ability to design, fabricate, and control complex and practical microfluidic devices while lowering the barrier to entry to continuous-flow microfluidics, thus democratizing cutting edge technology beyond a handful of well-resourced and specialized labs

Evolutionary approaches to optimisation in rough machining

This thesis concerns the use of Evolutionary Computation to optimise the sequence and selection of tools and machining parameters in rough milling applications. These processes are not automated in current Computer-Aided Manufacturing (CAM) software and this work, undertaken in collaboration with an industrial partner, aims to address this. Related research has mainly approached tool sequence optimisation using only a single tool type, and machining parameter optimisation of a single-tool sequence. In a real world industrial setting, tools with different geometrical profiles are commonly used in combination on rough machining tasks in order to produce components with complex sculptured surfaces. This work introduces a new representation scheme and search operators to support the use of the three most commonly used tool types: end mill, ball nose and toroidal. Using these operators, single-objective metaheuristic algorithms are shown to find near-optimal solutions, while surveying only a small number of tool sequences. For the first time, a multi-objective approach is taken to tool sequence optimisation. The process of ‘multi objectivisation’ is shown to offer two benefits: escaping local optima on deceptive multimodal search spaces and providing a selection of tool sequence alternatives to a machinist. The multi-objective approach is also used to produce a varied set of near-Pareto optimal solutions, offering different trade-offs between total machining time and total tooling costs, simultaneously optimising tool sequences and the cutting speeds of individual tools. A challenge for using computationally expensive CAM software, important for real world machining, is the time cost of evaluations. An asynchronous parallel evolutionary optimisation system is presented that can provide a significant speed up, even in the presence of heterogeneous evaluation times produced by variable length tool sequences. This system uses a distributed network of processors that could be easily and inexpensively implemented on existing commercial hardware, and accessible to even small workshops

Modelling, Monitoring, Control and Optimization for Complex Industrial Processes

This reprint includes 22 research papers and an editorial, collected from the Special Issue "Modelling, Monitoring, Control and Optimization for Complex Industrial Processes", highlighting recent research advances and emerging research directions in complex industrial processes. This reprint aims to promote the research field and benefit the readers from both academic communities and industrial sectors