7,115 research outputs found
LIS: Localization based on an intelligent distributed fuzzy system applied to a WSN
The localization of the sensor nodes is a fundamental problem in wireless sensor networks.
There are a lot of different kinds of solutions in the literature. Some of them use external
devices like GPS, while others use special hardware or implicit parameters in wireless
communications.
In applications like wildlife localization in a natural environment, where the power available
and the weight are big restrictions, the use of hungry energy devices like GPS or hardware
that add extra weight like mobile directional antenna is not a good solution.
Due to these reasons it would be better to use the localization’s implicit characteristics in
communications, such as connectivity, number of hops or RSSI. The measurement related
to these parameters are currently integrated in most radio devices. These measurement
techniques are based on the beacons’ transmissions between the devices.
In the current study, a novel tracking distributed method, called LIS, for localization of
the sensor nodes using moving devices in a network of static nodes, which have no additional
hardware requirements is proposed.
The position is obtained with the combination of two algorithms; one based on a local
node using a fuzzy system to obtain a partial solution and the other based on a centralized
method which merges all the partial solutions. The centralized algorithm is based on the
calculation of the centroid of the partial solutions.
Advantages of using fuzzy system versus the classical Centroid Localization (CL)
algorithm without fuzzy preprocessing are compared with an ad hoc simulator made for
testing localization algorithms.
With this simulator, it is demonstrated that the proposed method obtains less localization
errors and better accuracy than the centroid algorithm.Junta de Andalucía P07-TIC-0247
Dynamic Sleep Scheduling on Air Pollution Levels Monitoring with Wireless Sensor Network
Wireless Sensor Network (WSN) can be applied for Air Pollution Level Monitoring System that have been determined by the Environmental Impact Management Agency which is PM10, SO2, O3, NO2 and CO. In WSN, node system is constrained to a limited power supply, so that the node system has a lifetime. To doing lifetime maximization, power management scheme is required and sensor nodes should use energy efficiently. This paper proposes dynamic sleep scheduling using Time Category-Fuzzy Logic (Time-Fuzzy) Scheduling as a reference for calculating time interval for sleep and activated node system to support power management scheme. This research contributed in power management design to be applied to the WSN system to reduce energy expenditure. From the test result in real hardware node system, it can be seen that Time-Fuzzy Scheduling is better in terms of using the battery and it is better in terms of energy consumption too because it is more efficient 51.85% when it is compared with Fuzzy Scheduling, it is more efficient 68.81% when it is compared with Standard Scheduling and it is more efficient 85.03% when compared with No Scheduling
Locating sensors with fuzzy logic algorithms
In a system formed by hundreds of sensors deployed
in a huge area it is important to know the position where every
sensor is.
This information can be obtained using several methods.
However, if the number of sensors is high and the deployment
is based on ad-hoc manner, some auto-locating techniques must
be implemented.
In this paper we describe a novel algorithm based on fuzzy
logic with the objective of estimating the location of sensors
according to the knowledge of the position of some reference
nodes.
This algorithm, called LIS (Localization based on Intelligent
Sensors) is executed distributively along a wireless sensor network
formed by hundreds of nodes, covering a huge area.
The evaluation of LIS is led by simulation tests. The result
obtained shows that LIS is a promising method that can easily
solve the problem of knowing where the sensors are located.Junta de Andalucía P07-TIC-0247
FCS-MBFLEACH: Designing an Energy-Aware Fault Detection System for Mobile Wireless Sensor Networks
Wireless sensor networks (WSNs) include large-scale sensor nodes that are densely distributed over a geographical region that is completely randomized for monitoring, identifying, and analyzing physical events. The crucial challenge in wireless sensor networks is the very high dependence of the sensor nodes on limited battery power to exchange information wirelessly as well as the non-rechargeable battery of the wireless sensor nodes, which makes the management and monitoring of these nodes in terms of abnormal changes very difficult. These anomalies appear under faults, including hardware, software, anomalies, and attacks by raiders, all of which affect the comprehensiveness of the data collected by wireless sensor networks. Hence, a crucial contraption should be taken to detect the early faults in the network, despite the limitations of the sensor nodes. Machine learning methods include solutions that can be used to detect the sensor node faults in the network. The purpose of this study is to use several classification methods to compute the fault detection accuracy with different densities under two scenarios in regions of interest such as MB-FLEACH, one-class support vector machine (SVM), fuzzy one-class, or a combination of SVM and FCS-MBFLEACH methods. It should be noted that in the study so far, no super cluster head (SCH) selection has been performed to detect node faults in the network. The simulation outcomes demonstrate that the FCS-MBFLEACH method has the best performance in terms of the accuracy of fault detection, false-positive rate (FPR), average remaining energy, and network lifetime compared to other classification methods
Predictive intelligence to the edge through approximate collaborative context reasoning
We focus on Internet of Things (IoT) environments where a network of sensing and computing devices are responsible to locally process contextual data, reason and collaboratively infer the appearance of a specific phenomenon (event). Pushing processing and knowledge inference to the edge of the IoT network allows the complexity of the event reasoning process to be distributed into many manageable pieces and to be physically located at the source of the contextual information. This enables a huge amount of rich data streams to be processed in real time that would be prohibitively complex and costly to deliver on a traditional centralized Cloud system. We propose a lightweight, energy-efficient, distributed, adaptive, multiple-context perspective event reasoning model under uncertainty on each IoT device (sensor/actuator). Each device senses and processes context data and infers events based on different local context perspectives: (i) expert knowledge on event representation, (ii) outliers inference, and (iii) deviation from locally predicted context. Such novel approximate reasoning paradigm is achieved through a contextualized, collaborative belief-driven clustering process, where clusters of devices are formed according to their belief on the presence of events. Our distributed and federated intelligence model efficiently identifies any localized abnormality on the contextual data in light of event reasoning through aggregating local degrees of belief, updates, and adjusts its knowledge to contextual data outliers and novelty detection. We provide comprehensive experimental and comparison assessment of our model over real contextual data with other localized and centralized event detection models and show the benefits stemmed from its adoption by achieving up to three orders of magnitude less energy consumption and high quality of inference
Dynamic distributed clustering in wireless sensor networks via Voronoi tessellation control
This paper presents two dynamic and distributed clustering algorithms for Wireless Sensor Networks (WSNs). Clustering approaches are used in WSNs to improve the network lifetime and scalability by balancing the workload among the clusters. Each cluster is managed by a cluster head (CH) node. The first algorithm requires the CH nodes to be mobile: by dynamically varying the CH node positions, the algorithm is proved to converge to a specific partition of the mission area, the generalised Voronoi tessellation, in which the loads of the CH nodes are balanced. Conversely, if the CH nodes are fixed, a weighted Voronoi clustering approach is proposed with the same load-balancing objective: a reinforcement learning approach is used to dynamically vary the mission space partition by controlling the weights of the Voronoi regions. Numerical simulations are provided to validate the approaches
- …