New Grounded and Floating Simulated Inductance Circuits using Current Differencing Transconductance Amplifiers

Current differencing transconductance amplifier (CDTA) is receiving considerable attention as a building block for current-mode (CM) analog signal processing / signal generation. In this paper, new CDTA based lossless grounded and floating inductance simulation circuits have been proposed. The proposed grounded simulated inductance circuit employs two CDTAs and a single grounded capacitor whereas the floating simulated inductance circuit employs three CDTAs and a grounded capacitor. The circuit for grounded inductance does not require any realization conditions whereas in case of floating inductance only equality of two transconductances is needed (which can be easily maintained in practice by ensuring equal dc bias currents in the two transconductance amplifiers). Some sample results demonstrating the applications of the new simulated inductors using CMOS CDTAs have been given to confirm the workability of the new circuits

Novel Floating General Element Simulators Using CBTA

In this study, a novel floating frequency dependent negative resistor (FDNR), floating inductor, floating capacitor and floating resistor simulator circuit employing two CBTAs and three passive components is proposed. The presented circuit can realize floating FDNR, inductor, capacitor or resistor depending on the passive component selection. Since the passive elements are all grounded, this circuit is suitable for fully integrated circuit design. The circuit does not require any component matching conditions, and it has a good sensitivity performance with respect to tracking errors. Moreover, the proposed FDNR, inductance, capacitor and resistor simulator can be tuned electronically by changing the biasing current of the CBTA or can be controlled through the grounded resistor or capacitor. The high-order frequency dependent element simulator circuit is also presented. Depending on the passive component selection, it realizes high-order floating circuit defining as V(s) = snAI(s) or V(s) = s-nBI(s). The proposed floating FDNR simulator circuit and floating high-order frequency dependent element simulator circuit are demonstrated by using PSPICE simulation for 0.25 μm, level 7, TSMC CMOS technology parameters

Realization of Resistorless Lossless Positive and Negative Grounded Inductor Simulators Using Single ZC-CCCITA

This paper is in continuation with the very recent work of Prasad et al. [14], wherein new realizations of grounded and floating positive inductor simulator using current differencing transconductance amplifier (CDTA) are reported. The focus of the paper is to provide alternate realizations of lossless, both positive and negative inductor simulators (PIS and NIS) in grounded form using z-copy current-controlled current inverting transconductance amplifier (ZC-CCCITA), which can be considered as a derivative of CDTA, wherein the current differencing unit (CDU) is reduced to a current-controlled current inverting unit. We demonstrate that only a single ZC-CCCITA and one grounded capacitor are sufficient to realize grounded lossless PIS or NIS. The proposed circuits are resistorless whose parameters can be controlled through the bias currents. The workability of the proposed PIS is validated by SPICE simulations on three RLC prototypes

A Versatile Active Block: DXCCCII and Tunable Applications

The study describes dual-X controlled current conveyor (DXCCCII) as a versatile active block and its application to inductance simulators for testing. Moreover, the high pass filter application using with DXCCCII based inductance simulator and oscillator with flexible tunable oscillation frequency have been presented and simulated to confirm the theoretical validity. The proposed circuit which has a simple circuit design requires the low-voltage and the DXCCCII can also be tuned in the wide range by the biasing current. The proposed DXCCCII provides a good linearity, high output impedance at Z terminals, and a reasonable current and voltage transfer gain accuracy. The proposed DXCCCII and its applications have been simulated using the CMOS 0.18 µm technology

Reconstructing the Traffic State by Fusion of Heterogeneous Data

We present an advanced interpolation method for estimating smooth spatiotemporal profiles for local highway traffic variables such as flow, speed and density. The method is based on stationary detector data as typically collected by traffic control centres, and may be augmented by floating car data or other traffic information. The resulting profiles display transitions between free and congested traffic in great detail, as well as fine structures such as stop-and-go waves. We establish the accuracy and robustness of the method and demonstrate three potential applications: 1. compensation for gaps in data caused by detector failure; 2. separation of noise from dynamic traffic information; and 3. the fusion of floating car data with stationary detector data.Comment: For more information see http://www.mtreiber.de or http://www.akesting.d

Piezoelectric Phononic Plates: Retrieving the Frequency Band Structure via All-electric Experiments

We propose an experimental technique based on all-electric measurements to retrieve the frequency response of a one-dimensional piezoelectric phononic crystal plate, structured periodically with millimeter-scaled metallic strips on its two surfaces. The metallic electrodes, used for the excitation of Lamb-like guided modes in the plate, ensure at the same time control of their dispersion by means of externally loaded electric circuits that offer non-destructive tunability in the frequency response of these structures. Our results, in very good agreement with finite-element numerical predictions, reveal interesting symmetry aspects that are employed to analyze the frequency band structure of such crystals. More importantly, Lamb-like guided modes interact with electric-resonant bands induced by inductance loads on the plate, whose form and symmetry are discussed and analyzed in depth, showing unprecedented dispersion characteristics.Comment: This is the version of the article before peer review or editing, as submitted by an author to Smart Materials and Structures. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from it. The Version of Record is available online at https://doi.org/10.1088/1361-665X/ab4aa

A magnetically isolated gate driver for high-speed voltage sharing in series-connected MOSFETs

A scalable resonant gate drive circuit is described, suitable for driving series-connected MOSFETs in high-voltage, high-speed inverter applications for resistive and capacitive loads. Galvanic isolation is provided by a loop of high voltage wire, which also serves as the resonant inductor in the circuit. Fast dynamic voltage sharing is achieved by delivering equal current to each gate. A prototype is built and tested, demonstrating a 75ns switching time at 5kV using 900V MOSFETs

Giant magnetic-field changes in radio-frequency absorption in La0.67_{0.67}Sr0.33_{0.33}MnO3_3 near the Curie temperature

The DC transport properties of and the radio-frequency (RF) wave absorption (at 2.525 MHz) in a sample of La$_{0.67}$Sr$_{0.33}$MnO$_{3}$ prepared by floating-zone method are measured. The Curie temperature, $T_{c}$, of the sample is about 374 K. Giant temperature and magnetic-field variations in RF absorption are found in the vicinity of $T_{c}$. Relative change of the RF absorption in magnetic field (magnetoabsorption) is about 67% in field 2.1 kOe and about 55% in field 1 kOe. This giant magnetoabsorption effect can be used to develop RF devices controlled by temperature and low magnetic field. A weak temperature dependence of magnetoabsorption for the sample studied in the range from room temperature to about 350 K makes it especially attractive for practical use. The RF study supplemented with transport, magnetoresistive and magnetic measurements enables us to discuss the optimal properties of manganite samples for observation of giant magnetoabsorption in low field.Comment: Submitted to J. Magn. Magn. Mater., 14 pages including 7 figure