1 research outputs found

    Protocoles de support IPv6 pour rƩseaux de capteurs sur courant porteur en ligne

    Get PDF
    This thesis demonstrate the relevance of Powerline Communication (PLC) usage for sensor networks applications. We focus in particular on the low power and low data rate PLC technol- ogy "Watt Pulse Communication" (WPC) developed by the Watteco company and justify its usage for sensor network applications. We situate the WPC technology in the PLC landscape and define compatible protocols. We then describe the WPC module and the PLC media im- plementation in the COOJA network simulator. This allows us to propose a network solution over this technology, leveraging on the adaptation of the 802.15.4 standard over the WPC tech- nology. We then demonstrate the benefit of media convergence at the network layer level, with the use of the IPv6 standard that we adapted over our PLC solution thanks to the 6LoWPAN protocol. We justify the usage of standards protocols over our PLC solution and show that a routing solutions must be developed over WPC. We show through experiments that our PLC solution match low power and lossy network (LLNs) criterions for which the RPL standard pro- tocol has been designed. We justify the usage of this routing protocol over our PLC solution, and validate its implementation through 2 experiments conducted in tertiary types buildings. Respectively composed of 7 and 26 PLC nodes, results show that the routing topology created by RPL enable the coverage an entire floor of a tertiary building with a tree based topology and 3 hops maximum path length. We also show that the WPC technology exhibits a high connectivity between nodes and that the link quality is highly dynamic. Though, we observed that the routing topology was able to handle these variations. We point out the limitations of our PLC solution, which presents high delays and low throughput, creating high constraints on applications. Our sensor network solution over PLC relies on the IP standard, enabling packets exchanges with other technologies using the same protocol. In particular, we study the possi- bility to create heterogeneous networks mixing the WPC technology with 802.15.4 radio. We show that our protocol stack used over PLC enable to create this type of network, in order to benefit from the best of these 2 worlds. We purpose an architecture of a hybrid Radio / PLC node enabling to transfer packets between these 2 media. Then, we show that the combined usage of these 2 media increase the number of available paths and facilitate the routing, while diminishing the number of hops and possible unreachability of nodes. We then demonstrate that the addition of PLC and Radio/PLC nodes in a RF based battery powered sensor network enable to relieve their routing charge in order to expand their lifetime. We then continue the energy study with a power consumption optimization of a wireless sensor network platform from the hardware and software standpoint. We first determine the operating frequency, the wake up frequency and the mode of operation of the micro controller offering the lowest power consump- tion. We then conduct an energy study of 4 different radio transceivers using the 2.4 GHz and 868 MHz frequency band, in order to determine the most efficient architecture. We determine the protocols parameters and the software optimization to reach the lower power consumption of this architecture. Finally, we realize the energy study of several probes than can be embedded on the node, according to their nature and functioning mode. Our final architecture exhibits a total power consumption that is lower than 17 Ī¼W, with an applicative reporting each 10 minutes and the maintenance of the reachability with the network. We also mention in annex parts our implication in standards developments organizations such as the IETF a the IPSO alliance, that allow us to validate the implementation of our solution through interoperability events.Cette theĢ€se deĢmontre la pertinence de lā€™utilisation du Courant Porteur en Ligne (CPL) pour des applications de reĢseaux de capteurs. Nous nous focalisons sur la technologie basse consomma- tion et bas deĢbit "WPC" deĢveloppeĢe par la socieĢteĢ Watteco et nous montrons que son utilisation est justifieĢe pour des applications de reĢseaux de capteurs. Nous situons la solution WPC dans le paysage du CPL et deĢterminons les protocoles compatibles. Nous deĢcrivons ensuite lā€™impleĢ- mentation du module WPC et du meĢdia CPL dans le simulateur de reĢseau COOJA afin de proposer une solution reĢseau reposant sur lā€™adaptation du standard 802.15.4 sur la technologie WPC. Nous deĢmontrons ensuite lā€™inteĢreĢ‚t de la convergence des meĢdias au niveau reĢseau par lā€™utilisation du standard IPv6, que nous adaptons sur notre solution CPL graĢ‚ce au protocole 6LoWPAN. Nous justifions lā€™utilisation des protocoles standards de lā€™IETF sur notre solution CPL et nous montrons quā€™une solution de routage sur CPL doit eĢ‚tre deĢveloppeĢe. Nous montrons par des expeĢrimentations que notre solution CPL correspond aux criteĢ€res des reĢseaux basse puis- sance et supportant les pertes de transmissions (LLNs) pour lesquels le protocole standard RPL a eĢteĢ concĢ§u. Nous justifions lā€™utilisation de ce protocole sur CPL, et validons son impleĢmenta- tion dans le cadre de 2 expeĢrimentations. FormeĢes respectivement de 7 puis 26 noeuds CPL, les reĢsultats montrent que le routage creĢeĢ par RPL permet de couvrir un eĢtage dā€™un baĢ‚timent avec une topologie de type arbre et une profondeur de 3 sauts maximum. Nous montrons eĢgalement que la technologie WPC permet une connectiviteĢ importante entre les noeuds du reĢseau et que la qualiteĢ des liens est fortement dynamique, mais que le routage permet de sā€™adapter aĢ€ ces variations. Nous pointons eĢgalement les limites de notre solution CPL qui preĢsente des deĢlais importants et des deĢbits faibles, geĢneĢrant de contraintes fortes sur les applications. Notre solu- tion de reĢseau de capteur sur CPL repose sur le standard IP, permettant des eĢchanges de paquets avec dā€™autres technologies. Nous eĢtudions ainsi la possibiliteĢ de creĢer des reĢseaux heĢteĢrogeĢ€nes meĢlangeant la technologie WPC et radio 802.15.4. Nous montrons que notre pile protocolaire permet la creĢation de ce type de reĢseau, afin de profiter du meilleur des 2 mondes. Nous deĢcri- vons ainsi lā€™architecture dā€™un noeud hybride Radio FreĢquence (RF) / CPL permettant de faire transiter les paquets entre ces 2 meĢdias. Nous montrons ensuite que lā€™utilisation combineĢe de ces 2 meĢdias augmente le nombre de chemins disponibles et permet de faciliter le routage, en diminuant le nombre de sauts et le risque que certains noeuds du reĢseau soient inaccessibles. Nous deĢmontrons ensuite que lā€™injection de noeuds CPL et RF/CPL dans un reĢseau formeĢ de noeuds RF sur batterie permet de les deĢlester de leur charge de routage afin de prolonger leur dureĢe de vie. Nous preĢsentons ensuite une optimisation eĢnergeĢtique mateĢrielle et logicielle dā€™un noeud radio. Nous deĢterminons les parameĢ€tres des protocoles et les optimisations logicielles per- mettant de tirer au mieux partie de cette architecture et nous reĢalisons lā€™eĢtude eĢnergeĢtique de la sonde embarqueĢe sur le noeud. Au final, notre architecture preĢsente une consommation totale infeĢrieure aĢ€ 17 Ī¼W. Nous indiquons dans les annexes nos implications dans les organismes de standardisation qui ont permis de valider lā€™impleĢmentation
    corecore