889 research outputs found

    Fish-Like Robot Encapsulated by a Plastic Film

    Get PDF
    Underwater robots are currently utilized to evaluate water quality and the undersea landscape. Small-sized underwater robots are especially useful in improving the spatial resolution of the measurements, yielding high-quality data. This chapter describes a small-sized fish-like robot, with its surface composed of a flexible thin plastic film. Its internal components, including an actuator, could be encapsulated in the plastic film using a vacuum packaging machine. To simplify the waterproofing and pressure resistance properties of the fish-like robot, its internal components can be filled with insulating fluid. The plastic film on the surface has electromagnetic-wave-transmitting properties, allowing sensors to be arranged within the device, enabling assessment of its autonomous locomotion using infrared sensors. Robot attitude can be altered, based on geography of its internal components, floating blocks, and insulating fluid. This attitude could be especially determined by the differences in densities between the floating block and insulating fluid. Evaluation of attitude control showed that an insulating fluid heavier than water allows a large variation

    Dynamic Modeling of a Serial Link Robot Laminated with Plastic Film

    Get PDF
    This chapter presents serial link robots laminated with a plastic film, a derivation of the equations of motion of the laminated robots, and numerical simulation. Recently, to become capable of wide application for several serial link robots that work outside, waterproofing and dustproofing techniques are required. We have proposed a robot packaging method to improve waterproof and dustproof properties of serial link robots. Using the proposed packaging method, rigid links with some active joints are loosely laminated with plastic film to protect the links from dust and water. In the next step of our research, we must derive the equations of motion of the laminated robots for the design and performance improvement from the viewpoint of high speed and high energy efficiency. We assume a plastic film as a closed-loop link structure with passive joints in this chapter. A rigid serial link (fin) connected with a motor-actuated joint moves a closed-loop link structure with passive joints. We numerically investigate the influence of the flexural rigidity of a plastic film on the motion of the rigid fin. This research not only contributes to the lamination techniques but also develops a novel application of waterproofing and dustproofing techniques in robotics

    Swimming of onboard-powered autonomous robots in viscous fluid filled channels

    Get PDF
    Microrobots can make a great impact in medical applications such as minimally-invasive surgery, screening and diagnosis of diseases, targeted therapy and drug delivery. Smallsized bio-inspired robots can mimic flagellar propulsion mechanisms of microorganisms for actuation in microfluidic environments, which are dominated by viscous forces. Microorganisms propel themselves by means of the motion of their flagella such as rotation of rigid helices or travelling planar waves on flexible tails similar to whipping motion. Here, we present characterization of swimming of onboard-powered autonomous robots inside cylindrical tubes. Robots consist of two links, head and tail, connected with a revolute joint. Rigid helical tails of the swimmer robots are made of steel wires with 12 different configurations of helical radius and pitch. From experiments forward linear velocity of robots and angular velocities of the links are measured, and compared with the mathematical model, which is based on the resistive force theory. Results indicate that the motion of the swimmer inside channels can be predicted by means of the resistive force theory reasonably well

    Accelerating Aquatic Soft Robots with Elastic Instability Effects

    Full text link
    Sinusoidal undulation has long been considered the most successful swimming pattern for fish and bionic aquatic robots [1]. However, a swimming pattern generated by the hair clip mechanism (HCM, part iii, Figure 1A) [2]~[5] may challenge this knowledge. HCM is an in-plane prestressed bi-stable mechanism that stores elastic energy and releases the stored energy quickly via its snap-through buckling. When used for fish robots, the HCM functions as the fish body and creates unique swimming patterns that we term HCM undulation. With the same energy consumption [3], HCM fish outperforms the traditionally designed soft fish with a two-fold increase in cruising speed. We reproduce this phenomenon in a single-link simulation with Aquarium [6]. HCM undulation generates an average propulsion of 16.7 N/m, 2-3 times larger than the reference undulation (6.78 N/m), sine pattern (5.34 N/m/s), and cambering sine pattern (6.36 N/m), and achieves an efficiency close to the sine pattern. These results can aid in developing fish robots and faster swimming patterns

    Autonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators

    Get PDF
    In this work we describe an autonomous soft-bodied robot that is both self-contained and capable of rapid, continuum-body motion. We detail the design, modeling, fabrication, and control of the soft fish, focusing on enabling the robot to perform rapid escape responses. The robot employs a compliant body with embedded actuators emulating the slender anatomical form of a fish. In addition, the robot has a novel fluidic actuation system that drives body motion and has all the subsystems of a traditional robot onboard: power, actuation, processing, and control. At the core of the fish's soft body is an array of fluidic elastomer actuators. We design the fish to emulate escape responses in addition to forward swimming because such maneuvers require rapid body accelerations and continuum-body motion. These maneuvers showcase the performance capabilities of this self-contained robot. The kinematics and controllability of the robot during simulated escape response maneuvers are analyzed and compared with studies on biological fish. We show that during escape responses, the soft-bodied robot has similar input–output relationships to those observed in biological fish. The major implication of this work is that we show soft robots can be both self-contained and capable of rapid body motion.National Science Foundation (U.S.) (NSF IIS1226883)National Science Foundation (U.S.) (NSF CCF1138967)National Science Foundation (U.S.) (1122374

    DEVELOPMENT OF FUNCTIONAL NANOCOMPOSITE MATERIALS TOWARDS BIODEGRADABLE SOFT ROBOTICS AND FLEXIBLE ELECTRONICS

    Get PDF
    World population is continuously growing, as well as the influence we have on the ecosystem\u2019s natural equilibrium. Moreover, such growth is not homogeneous and it results in an overall increase of older people. Humanity\u2019s activity, growth and aging leads to many challenging issues to address: among them, there are the spread of suddenly and/or chronic diseases, malnutrition, resource pressure and environmental pollution. Research in the novel field of biodegradable soft robotics and electronics can help dealing with these issues. In fact, to face the aging of the population, it is necessary an improvement in rehabilitation technologies, physiological and continuous monitoring, as well as personalized care and therapy. Also in the agricultural sector, an accurate and efficient direct measure of the plants health conditions would be of help especially in the less-developed countries. But since living beings, such as humans and plants, are constituted by soft tissues that continuously change their size and shapes, today\u2019s traditional technologies, based on rigid materials, may not be able to provide an efficient interaction necessary to satisfy these needs: the mechanical mismatch is too prohibitive. Instead, soft robotic systems and devices can be designed to combine active functionalities with soft mechanical properties that can allow them to efficiently and safely interact with soft living tissues. Soft implantable biomedical devices, smart rehabilitation devices and compliant sensors for plants are all applications that can be achieved with soft technologies. The development of sophisticated autonomous soft systems needs the integration on a unique soft body or platform of many functionalities (such as mechanical actuation, energy harvesting, storage and delivery, sensing capabilities). A great research interest is recently arising on this topic, but yet not so many groups are focusing their efforts in the use of natural-derived and biodegradable raw materials. In fact, resource pressure and environmental pollution are becoming more and more critical problems. It should be completely avoided the use of in exhaustion, pollutant, toxic and non-degradable resources, such as lithium, petroleum derivatives, halogenated compounds and organic solvents. So-obtained biodegradable soft systems and devices could then be manufactured in high number and deployed in the environment to fulfil their duties without the need to recover them, since they can safely degrade in the environment. The aim of the current Ph.D. project is the use of natural-derived and biodegradable polymers and substances as building blocks for the development of smart composite materials that could operate as functional elements in a soft robotic system or device. Soft mechanical properties and electronic/ionic conductive properties are here combined together within smart nanocomposite materials. The use of supersonic cluster beam deposition (SCBD) technique enabled the fabrication of cluster-assembled Au electrodes that can partially penetrate into the surface of soft materials, providing an efficient solution to the challenge of coupling conductive metallic layers and soft deformable polymeric substrates. In this work, cellulose derivatives and poly(3-hydroxybutyrate) bioplastic are used as building blocks for the development of both underwater and in-air soft electromechanical actuators that are characterized and tested. A cellulosic matrix is blended with natural-derived ionic liquids to design and manufacture completely biodegradable supercapacitors, extremely interesting energy storage devices. Lastly, ultrathin Au electrodes are here deposited on biodegradable cellulose acetate sheets, in order to develop transparent flexible electronics as well as bidirectional resistive-type strain sensors. The results obtained in this work can be regarded as a preliminary study towards the realization of full natural-derived and biodegradable soft robotic and electronic systems and devices

    Inherently Elastic Actuation for Soft Robotics

    Get PDF

    Bio-inspired Robotic Fish with Multiple Fins

    Get PDF
    • …
    corecore