16,916 research outputs found
Static and dynamic accuracy of an innovative miniaturized wearable platform for short range distance measurements for human movement applications
Magneto-inertial measurement units (MIMU) are a suitable solution to assess human motor performance both indoors and outdoors. However, relevant quantities such as step width and base of support, which play an important role in gait stability, cannot be directly measured using MIMU
alone. To overcome this limitation, we developed a wearable platform specifically designed for human movement analysis applications, which integrates a MIMU and an Infrared Time-of-Flight proximity sensor (IR-ToF), allowing for the estimate of inter-object distance. We proposed a thorough testing protocol for evaluating the IR-ToF sensor performances under experimental conditions resembling those encountered during gait. In particular, we tested the sensor performance for different (i) target colors; (ii) sensor-target distances (up to 200 mm) and (iii) sensor-target angles
of incidence (AoI) (up to 60°). Both static and dynamic conditions were analyzed. A pendulum, simulating the oscillation of a human leg, was used to generate highly repeatable oscillations with a maximum angular velocity of 6 rad/s. Results showed that the IR-ToF proximity sensor was not
sensitive to variations of both distance and target color (except for black). Conversely, a relationship between error magnitude and AoI values was found. For AoI equal to 0°, the IR-ToF sensor performed equally well both in static and dynamic acquisitions with a distance mean absolute error <1.5 mm. Errors increased up to 3.6 mm (static) and 11.9 mm (dynamic) for AoI equal to ±30°, and up to 7.8 mm (static) and 25.6 mm (dynamic) for AoI equal to ±60°. In addition, the wearable platform was used during a preliminary experiment for the estimation of the inter-foot distance on a single healthy subject while walking. In conclusion, the combination of magneto-inertial unit and IR-ToF technology represents a valuable alternative solution in terms of accuracy, sampling frequency, dimension and power consumption, compared to existing technologies
Robust Legged Robot State Estimation Using Factor Graph Optimization
Legged robots, specifically quadrupeds, are becoming increasingly attractive
for industrial applications such as inspection. However, to leave the
laboratory and to become useful to an end user requires reliability in harsh
conditions. From the perspective of state estimation, it is essential to be
able to accurately estimate the robot's state despite challenges such as uneven
or slippery terrain, textureless and reflective scenes, as well as dynamic
camera occlusions. We are motivated to reduce the dependency on foot contact
classifications, which fail when slipping, and to reduce position drift during
dynamic motions such as trotting. To this end, we present a factor graph
optimization method for state estimation which tightly fuses and smooths
inertial navigation, leg odometry and visual odometry. The effectiveness of the
approach is demonstrated using the ANYmal quadruped robot navigating in a
realistic outdoor industrial environment. This experiment included trotting,
walking, crossing obstacles and ascending a staircase. The proposed approach
decreased the relative position error by up to 55% and absolute position error
by 76% compared to kinematic-inertial odometry.Comment: 8 pages, 12 figures. Accepted to RA-L + IROS 2019, July 201
Ambulatory Assessment of Ankle and Foot Dynamics
Ground reaction force (GRF) measurement is important in the analysis of human body movements. The main drawback of the existing measurement systems is the restriction to a laboratory environment. This paper proposes an ambulatory system for assessing the dynamics of ankle and foot, which integrates the measurement of the GRF with the measurement of human body movement. The GRF and the center of pressure (CoP) are measured using two six-degrees-of-freedom force sensors mounted beneath the shoe. The movement of foot and lower leg is measured using three miniature inertial sensors, two rigidly attached to the shoe and one on the lower leg. The proposed system is validated using a force plate and an optical position measurement system as a reference. The results show good correspondence between both measurement systems, except for the ankle power estimation. The root mean square (RMS) difference of the magnitude of the GRF over 10 evaluated trials was (0.012 plusmn 0.001) N/N (mean plusmn standard deviation), being (1.1 plusmn 0.1)% of the maximal GRF magnitude. It should be noted that the forces, moments, and powers are normalized with respect to body weight. The CoP estimation using both methods shows good correspondence, as indicated by the RMS difference of (5.1 plusmn 0.7) mm, corresponding to (1.7 plusmn 0.3)% of the length of the shoe. The RMS difference between the magnitudes of the heel position estimates was calculated as (18 plusmn 6) mm, being (1.4 plusmn 0.5)% of the maximal magnitude. The ankle moment RMS difference was (0.004 plusmn 0.001) Nm/N, being (2.3 plusmn 0.5)% of the maximal magnitude. Finally, the RMS difference of the estimated power at the ankle was (0.02 plusmn 0.005) W/N, being (14 plusmn 5)% of the maximal power. This power difference is caused by an inaccurate estimation of the angular velocities using the optical reference measurement system, which is due to considering the foot as a single segment. The ambulatory system considers separat- - e heel and forefoot segments, thus allowing an additional foot moment and power to be estimated. Based on the results of this research, it is concluded that the combination of the instrumented shoe and inertial sensing is a promising tool for the assessment of the dynamics of foot and ankle in an ambulatory setting
Inertial sensor-based knee flexion/extension angle estimation
A new method for estimating knee joint flexion/extension angles from segment acceleration and angular velocity data is described. The approach uses a combination of Kalman filters and biomechanical constraints based on anatomical knowledge. In contrast to many recently published methods, the proposed approach does not make use of the earth’s magnetic field and hence is insensitive to the complex field distortions commonly found in modern buildings. The method was validated experimentally by calculating knee angle from measurements taken from two IMUs placed on adjacent body segments. In contrast to many previous studies which have validated their approach during relatively slow activities or over short durations, the performance of the algorithm was evaluated during both walking and running over 5 minute periods. Seven healthy subjects were tested at various speeds from 1 to 5 miles/hour. Errors were estimated by comparing the results against data obtained simultaneously from a 10 camera motion tracking system (Qualysis). The average measurement error ranged from 0.7 degrees for slow walking (1 mph) to 3.4 degrees for running (5mph). The joint constraint used in the IMU analysis was derived from the Qualysis data. Limitations of the method, its clinical application and its possible extension are discussed
Sparse Inertial Poser: Automatic 3D Human Pose Estimation from Sparse IMUs
We address the problem of making human motion capture in the wild more
practical by using a small set of inertial sensors attached to the body. Since
the problem is heavily under-constrained, previous methods either use a large
number of sensors, which is intrusive, or they require additional video input.
We take a different approach and constrain the problem by: (i) making use of a
realistic statistical body model that includes anthropometric constraints and
(ii) using a joint optimization framework to fit the model to orientation and
acceleration measurements over multiple frames. The resulting tracker Sparse
Inertial Poser (SIP) enables 3D human pose estimation using only 6 sensors
(attached to the wrists, lower legs, back and head) and works for arbitrary
human motions. Experiments on the recently released TNT15 dataset show that,
using the same number of sensors, SIP achieves higher accuracy than the dataset
baseline without using any video data. We further demonstrate the effectiveness
of SIP on newly recorded challenging motions in outdoor scenarios such as
climbing or jumping over a wall.Comment: 12 pages, Accepted at Eurographics 201
- …