Phase field analysis of eutectic breakdown.

In this paper an isotropic multi-phase-field model is extended to include the effects of anisotropy and the spontaneous nucleation of an absent phase. This model is derived and compared against a published single phase model. Results from this model are compared against results from other multi-phase models, additionally this model is used to examine the break down of a regular two dimensional eutectic into a single phase dendritic front

Growth of Self Organized Eutectic Fibers from LiF-Rare Earth Fluoride Systems

Eutectic fibers consisting of an ordered arrangement of LiF fibrils inside a LiREF4 matrix (RE = Y, Gd) can be grown with the micro-pulling-down method at sufficiently large pulling rate exceeding 120 mm/h. The distance between individual fibrils could be scaled down to 1 micrometer at 300 mm/h pulling. LiF-LiYF4 has stronger tendency to form facetted eutectic colonies than LiF-LiGdF4, explained by the larger entropy of melting of the former.Comment: 6 pages, 5 figures, Talk on MRS Fall 2012 Bosto

Identification of best available thermal energy storage compounds for low-to-moderate temperature storage applications in buildings

Award-winning paper at III International Congress and V National on Sustainable Construction and Eco-Efficient Solutions (CICSE) March 2017Over the last 40 years different thermal energy storage materials have been investigated with the aim of enhancing energy efficiency in buildings, improving systems performance, and increasing the share of renewable energies. However, the main requirements for their efficient implementation are not fully met by most of them. This paper develops a comparative review of thermophysical properties of materials reported in the literature. The results show that the highest volumetric storage capacities for the best available sensible, latent and thermochemical storage materials are 250 MJ/m3, 514 MJ/m3 and 2000 MJ/m3, respectively, corresponding to water, barium hydroxide octahydrate, and magnesium chloride hexahydrate. A group of salt hydrates and inorganic eutectics have been identified as the most promising for the development of competitive thermal storage materials for cooling, heating and comfort applications in the short-term. In the long-term, thermochemical storage materials seem promising. However, additional research efforts are required.Identificación de los mejores compuestos disponibles de almacenamiento de energía térmica para aplicaciones de baja a moderada temperatura en edificación. En los últimos 40 años se han investigado diferentes materiales de almacenamiento térmico con el objetivo de mejorar la eficiencia energética en los edificios, mejorar el rendimiento de sistemas y aumentar el uso de renovables. Sin embargo, la mayoría no cumple los principales requisitos para su eficiente implementación. Este artículo desarrolla una revisión de las propiedades termofísicas de los materiales existentes en la literatura. Los resultados muestran que las mayores capacidades de almacenamiento volumétrico para los mejores materiales de almacenamiento sensible, latente y termoquímico son 250 MJ/m3, 514 MJ/m3 y 2000 MJ/m3, respectivamente, correspondientes a agua, hidróxido de bario octahidratado y cloruro de magnesio hexahidratado. Un conjunto de sales hidratadas y eutécticos han sido identificados como los más prometedores para el desarrollo de materiales competitivos para aplicaciones de enfriamiento, calefacción y confort a corto plazo. A largo plazo, el almacenamiento termoquímico parece prometedor. Sin embargo, investigación adicional es requerida.Fondo Europeo de Desarrollo Regional SOE1/P3/P0429EUMinisterio de Educación, Cultura y Deportes FPU14/06583Ministerio de Economía y Competitividad BES-2015-0703149Ministerio de Economía y Competitividad CTQ2014-52763-C2-2-RMinisterio de Economía y Competitividad CTQ2017- 83602-C2-2

Formation of Ti–Zr–Cu–Ni bulk metallic glasses

Formation of bulk metallic glass in quaternary Ti–Zr–Cu–Ni alloys by relatively slow cooling from the melt is reported. Thick strips of metallic glass were obtained by the method of metal mold casting. The glass forming ability of the quaternary alloys exceeds that of binary or ternary alloys containing the same elements due to the complexity of the system. The best glass forming alloys such as Ti34Zr11Cu47Ni8 can be cast to at least 4-mm-thick amorphous strips. The critical cooling rate for glass formation is of the order of 250 K/s or less, at least two orders of magnitude lower than that of the best ternary alloys. The glass transition, crystallization, and melting behavior of the alloys were studied by differential scanning calorimetry. The amorphous alloys exhibit a significant undercooled liquid region between the glass transition and first crystallization event. The glass forming ability of these alloys, as determined by the critical cooling rate, exceeds what is expected based on the reduced glass transition temperature. It is also found that the glass forming ability for alloys of similar reduced glass transition temperature can differ by two orders of magnitude as defined by critical cooling rates. The origins of the difference in glass forming ability of the alloys are discussed. It is found that when large composition redistribution accompanies crystallization, glass formation is enhanced. The excellent glass forming ability of alloys such as Ti34Zr11Cu47Ni8 is a result of simultaneously minimizing the nucleation rate of the competing crystalline phases. The ternary/quaternary Laves phase (MgZn2 type) shows the greatest ease of nucleation and plays a key role in determining the optimum compositions for glass formation

Advanced materials research for long-haul aircraft turbine engines

The status of research efforts to apply low to intermediate temperature composite materials and advanced high temperature materials to engine components is reviewed. Emerging materials technologies and their potential benefits to aircraft gas turbines were emphasized. The problems were identified, and the general state of the technology for near term use was assessed

Heat storage in alloy transformations

The feasibility of using metal alloys as thermal energy storage media was determined. The following major elements were studied: (1) identification of congruently transforming alloys and thermochemical property measurements; (2) development of a precise and convenient method for measuring volume change during phase transformation and thermal expansion coefficients; (3) development of a numerical modeling routine for calculating heat flow in cylindrical heat exchangers containing phase change materials; and (4) identification of materials that could be used to contain the metal alloys. Several eutectic alloys and ternary intermetallic phases were determined. A method employing X-ray absorption techniques was developed to determine the coefficients of thermal expansion of both the solid and liquid phases and the volume change during phase transformation from data obtained during one continuous experimental test. The method and apparatus are discussed and the experimental results are presented. The development of the numerical modeling method is presented and results are discussed for both salt and metal alloy phase change media

The promise of eutectics for aircraft turbines

The current status of the first generation eutectics, gamma/gamma transition - delta and NiTaC-13, is described in detail. Several second generation systems, such as gamma/gamma transition - alpha and NiTaC 3-116A, gamma - beta, and COTAC 74 are also reviewed with particular emphasis on their critical physical and mechanical properties, future research directions, and potential applications. Results of recent cost-benefit analyses of eutectic turbine blades are discussed

Metal matrix composites for aircraft propulsion systems

Studies of advanced aircraft propulsion systems have indicated that performance gains and operating costs are possible through the application of metal matrix composites. Compressor fan blades and turbine blades have been identified as components with high payoff potential as a result of these studies. This paper will present the current status of development of five candidate materials for such applications. Boron fiber/aluminum, boron fiber/titanium, and silicon carbide fiber/titanium composites are considered for lightweight compressor fan blades. Directionally solidified eutectic superalloy and tungsten wire/superalloy composites are considered for application to turbine blades for use temperatures to 1100 C (2000 F)

Phase boundary anisotropy and its effects on the maze-to-lamellar transition in a directionally solidified Al-Al2Cu eutectic

Solid-solid phase boundary anisotropy is a key factor controlling the selection and evolution of non-faceted eutectic patterns during directional solidification. This is most remarkably observed during the so-called maze-to-lamellar transition. By using serial sectioning, we followed the spatio-temporal evolution of a maze pattern over long times in a large Al-Al2Cu eutectic grain with known crystal orientation of the Al and Al2Cu phases, hence known crystal orientation relationship (OR). The corresponding phase boundary energy anisotropy ($\gamma$-plot) was also known, as being previously estimated from molecular-dynamics computations. The experimental observations reveal the time-scale of the maze-to-lamellar transition and shed light on the processes involved in the gradual alignment of the phase boundaries to one distinct energy minimum which nearly corresponds to one distinct plane from the family $\{120\}^{\rm{Al}} //\{110\}^{\rm{Al2Cu}}$. This particular plane is selected due to a crystallographic bias induced by a small disorientation of the crystals relative to the perfect OR. The symmetry of the OR is thus slightly broken, which promotes lamellar alignment. Finally, the maze-to-lamellar transition leaves behind a network of fault lines inherited from the phase boundary alignment process. In the maze pattern, the fault lines align along the corners of the Wulff shape, thus allowing us to propose a link between the pattern defects and missing orientations in the Wulff shapeComment: 26 pages, 6 figure

Evaluation of an advanced directionally solidified gamma/gamma'-alpha Mo eutectic alloy

An attempt was made to improve on the properties of the candidate jet engine turbine blade material AG-60, a gamma/gamma prime-alpha Mo eutectic composite. Alloy 38 (AG-170) was evaluated in the greatest detail. This alloy, Ni-5.88 A1-29.74 Mo-1.65 V-1.2C Re (weight percent), represents an improvement beyond AG-60, based on mechanical testing of the transverse and/or longitudinal orientations over a range of temperatures in tension, shear, rupture, and rupture after thermal exposure. It is likely that other alloys in the study represent a similar improvement