Phase only transmit beamforming for spectrum sharing microwave systems

This paper deals with the problem of phase-only transmit beamforming in spectrum sharing microwave systems. In contrast to sub-6 GHz schemes, general microwave systems require a large number of antennas due to its huge path loss. As a consequence, digital beamforming needs a large number of computational resources compared to analog beamforming, which only needs a single radio-frequency chain, results the less computational demanding solution. Analog schemes are usually composed by a phase shifter network whose elements transmit at a certain fixed power so that the system designer shall compute the phase values for each element given a set of directions. This approach leads to non-convex quadratic problems where the traditional semidefinite relaxation fails to deliver satisfactory outcomes. In order to solve this, we propose a nonsmooth method that behaves well in several scenarios. Numerical evaluations in different spectrum sharing scenarios, which show the performance of our method, are provided.Peer ReviewedPostprint (author's final draft

View on 5G Architecture: Version 1.0

The current white paper focuses on the produced results after one year research mainly from 16 projects working on the abovementioned domains. During several months, representatives from these projects have worked together to identify the key findings of their projects and capture the commonalities and also the different approaches and trends. Also they have worked to determine the challenges that remain to be overcome so as to meet the 5G requirements. The goal of 5G Architecture Working Group is to use the results captured in this white paper to assist the participating projects achieve a common reference framework. The work of this working group will continue during the following year so as to capture the latest results to be produced by the projects and further elaborate this reference framework. The 5G networks will be built around people and things and will natively meet the requirements of three groups of use cases: • Massive broadband (xMBB) that delivers gigabytes of bandwidth on demand • Massive machine-type communication (mMTC) that connects billions of sensors and machines • Critical machine-type communication (uMTC) that allows immediate feedback with high reliability and enables for example remote control over robots and autonomous driving. The demand for mobile broadband will continue to increase in the next years, largely driven by the need to deliver ultra-high definition video. However, 5G networks will also be the platform enabling growth in many industries, ranging from the IT industry to the automotive, manufacturing industries entertainment, etc. 5G will enable new applications like for example autonomous driving, remote control of robots and tactile applications, but these also bring a lot of challenges to the network. Some of these are related to provide low latency in the order of few milliseconds and high reliability compared to fixed lines. But the biggest challenge for 5G networks will be that the services to cater for a diverse set of services and their requirements. To achieve this, the goal for 5G networks will be to improve the flexibility in the architecture. The white paper is organized as follows. In section 2 we discuss the key business and technical requirements that drive the evolution of 4G networks into the 5G. In section 3 we provide the key points of the overall 5G architecture where as in section 4 we elaborate on the functional architecture. Different issues related to the physical deployment in the access, metro and core networks of the 5G network are discussed in section 5 while in section 6 we present software network enablers that are expected to play a significant role in the future networks. Section 7 presents potential impacts on standardization and section 8 concludes the white paper

Aerial base station placement in temporary-event scenarios

Die Anforderungen an den Netzdatenverkehr sind in den letzten Jahren dramatisch gestiegen, was ein großes Interesse an der Entwicklung neuartiger Lösungen zur Erhöhung der Netzkapazität in Mobilfunknetzen erzeugt hat. Besonderes Augenmerk wurde auf das Problem der Kapazitätsverbesserung bei temporären Veranstaltungen gelegt, bei denen das Umfeld im Wesentlichen dynamisch ist. Um der Dynamik der sich verändernden Umgebung gerecht zu werden und die Bodeninfrastruktur durch zusätzliche Kapazität zu unterstützen, wurde der Einsatz von Luftbasisstationen vorgeschlagen. Die Luftbasisstationen können in der Nähe des Nutzers platziert werden und aufgrund der im Vergleich zur Bodeninfrastruktur höheren Lage die Vorteile der Sichtlinienkommunikation nutzen. Dies reduziert den Pfadverlust und ermöglicht eine höhere Kanalkapazität. Das Optimierungsproblem der Maximierung der Netzkapazität durch die richtige Platzierung von Luftbasisstationen bildet einen Schwerpunkt der Arbeit. Es ist notwendig, das Optimierungsproblem rechtzeitig zu lösen, um auf Veränderungen in der dynamischen Funkumgebung zu reagieren. Die optimale Platzierung von Luftbasisstationen stellt jedoch ein NP-schweres Problem dar, wodurch die Lösung nicht trivial ist. Daher besteht ein Bedarf an schnellen und skalierbaren Optimierungsalgorithmen. Als Erstes wird ein neuartiger Hybrid-Algorithmus (Projected Clustering) vorgeschlagen, der mehrere Lösungen auf der Grundlage der schnellen entfernungsbasierten Kapazitätsapproximierung berechnet und sie auf dem genauen SINR-basierten Kapazitätsmodell bewertet. Dabei werden suboptimale Lösungen vermieden. Als Zweites wird ein neuartiges verteiltes, selbstorganisiertes Framework (AIDA) vorgeschlagen, welches nur lokales Wissen verwendet, den Netzwerkmehraufwand verringert und die Anforderungen an die Kommunikation zwischen Luftbasisstationen lockert. Bei der Formulierung des Platzierungsproblems konnte festgestellt werden, dass Unsicherheiten in Bezug auf die Modellierung der Luft-Bodensignalausbreitung bestehen. Da dieser Aspekt im Rahmen der Analyse eine wichtige Rolle spielt, erfolgte eine Validierung moderner Luft-Bodensignalausbreitungsmodelle, indem reale Messungen gesammelt und das genaueste Modell für die Simulationen ausgewählt wurden.As the traffic demands have grown dramatically in recent years, so has the interest in developing novel solutions that increase the network capacity in cellular networks. The problem of capacity improvement is even more complex when applied to a dynamic environment during a disaster or temporary event. The use of aerial base stations has received much attention in the last ten years as the solution to cope with the dynamics of the changing environment and to supplement the ground infrastructure with extra capacity. Due to higher elevations and possibility to place aerial base stations in close proximity to the user, path loss is significantly smaller in comparison to the ground infrastructure, which in turn enables high data capacity. We are studying the optimization problem of maximizing network capacity by proper placement of aerial base stations. To handle the changes in the dynamic radio environment, it is necessary to promptly solve the optimization problem. However, we show that the optimal placement of aerial base stations is the NP-hard problem and its solution is non-trivial, and thus, there is a need for fast and scalable optimization algorithms. This dissertation investigates how to solve the placement problem efficiently and to support the dynamics of temporary events. First, we propose a novel hybrid algorithm (Projected Clustering), which calculates multiple solutions based on the fast distance-based capacity approximation and evaluates them on the accurate SINR-based capacity model, avoiding sub-optimal solutions. Second, we propose a novel distributed, self-organized framework (AIDA), which conducts a decision-making process using only local knowledge, decreasing the network overhead and relaxing the requirements for communication between aerial base stations. During the formulation of the placement problem, we found that there is still considerable uncertainty with regard to air-to-ground propagation modeling. Since this aspect plays an important role in our analysis, we validated state-of-the-art air-to-ground propagation models by collecting real measurements and chose the most accurate model for the simulations

Location and Map Awareness Technologies in Next Wireless Networks

In a future perspective, the need of mapping an unknown indoor environment, of localizing and retrieving information from objects with zero costs and efforts could be satisfied by the adoption of next 5G technologies. Thanks to the mix of mmW and massive arrays technologies, it will be possible to achieve a higher indoor localization accuracy without relying on a dedicated infrastructure for localization but exploiting that designed for communication purposes. Besides users localization and navigation objectives, mapping and thus, the capability of reconstructing indoor scenarios, will be an important field of research with the possibility of sharing environmental information via crowd-sourcing mechanisms between users. Finally, in the Internet of Things vision, it is expected that people, objects and devices will be interconnected to each other with the possibility of exchanging the acquired and estimated data including those regarding objects identification, positioning and mapping contents. To this end, the merge of RFID, WSN and UWB technologies has demonstrated to be a promising solution. Stimulated by this framework, this work describes different technological and signal processing approaches to ameliorate the localization capabilities and the user awareness about the environment. From one side, it has been focused on the study of the localization and mapping capabilities of multi-antenna systems based on 5G technologies considering different technological issues, as for example those related to the existing available massive arrays. From the other side, UWB-RFID systems relying on passive communication schemes have been investigated in terms of localization coverage and by developing different techniques to improve the accuracy even in presence of NLOS conditions