Noise and Equivalent Circuit of Double Injection

Measurements of the high‐frequency noise of a silicon double‐injection diode result in 〈i^2〉 = α⋅4kT(1/r)Δf with α=1.04 and in agreement with the literature. A new interpretation demands Nyquist noise with α≡1 in these devices at high frequencies. This is in accord with an equivalent circuit derived for the double‐injection process. Speculations are made on the general validity of Nyquist noise in nonlinear devices at high frequencies. In addition, generation‐recombination noise is suggested as the prime source of the low‐frequency noise

Impedance spectroscopy of ions at liquid-liquid interfaces

The possibility to extract properties of an interface between two immiscible liquids, e.g., electrolyte solutions or polyelectrolyte multilayers, by means of impedance spectroscopy is investigated theoretically within a dynamic density functional theory which is equivalent to the Nernst-Planck-Poisson theory. A novel approach based on a two-step fitting procedure of an equivalent circuit to impedance spectra is proposed which allows to uniquely separate bulk and interfacial elements. Moreover, the proposed method avoids overfitting of the bulk properties of the two liquids in contact and underfitting of the interfacial properties, as they might occur for standard one-step procedures. The key idea is to determine the bulk elements of the equivalent circuit in a first step by fitting corresponding sub-circuits to the spectra of uniform electrolyte solutions, and afterwards fitting the full equivalent circuit with fixed bulk elements to the impedance spectrum containing the interface. This approach is exemplified for an equivalent circuit which leads to a physically intuitive qualitative behavior as well as to quantitively realistic values of the interfacial elements. The proposed method is robust such that it can be expected to be applicable to a wide class of systems with liquid-liquid interfaces

Equivalent Circuit Model of High-Performance VCSELs

In this work, a general equivalent circuit model based on the carrier reservoir splitting approach in high-performance multi-mode vertical-cavity surface-emitting lasers (VCSELs) is presented. This model accurately describes the intrinsic dynamic behavior of these VCSELs for the case where the lasing modes do not share a common carrier reservoir. Moreover, this circuit model is derived from advanced multi-mode rate equations that take into account the effect of spatial hole-burning, gain compression, and inhomogeneity in the carrier distribution between the lasing mode ensembles. The validity of the model is confirmed through simulation of the intrinsic modulation response of these lasers.DFG, 43659573, SFB 787: Halbleiter - Nanophotonik: Materialien, Modelle, BauelementeDFG, 414044773, Open Access Publizieren 2019 - 2020 / Technische Universität Berli

Electric circuit networks equivalent to chaotic quantum billiards

We formulate two types of electric RLC resonance network equivalent to quantum billiards. In the network of inductors grounded by capacitors squared resonant frequencies are eigenvalues of the quantum billiard. In the network of capacitors grounded by inductors squared resonant frequencies are given by inverse eigen values of the billiard. In both cases local voltages play role of the wave function of the quantum billiard. However as different from quantum billiards there is a heat power because of resistance of the inductors. In the equivalent chaotic billiards we derive the distribution of the heat power which well describes numerical statistics.Comment: 9 pages, 7 figure

Equivalent Circuit for Magnetoelectric Read and Write Operations

We describe an equivalent circuit model applicable to a wide variety of magnetoelectric phenomena and use SPICE simulations to benchmark this model against experimental data. We use this model to suggest a different mode of operation where the "1" and "0'" states are not represented by states with net magnetization (like $m_x$, $m_y$ or $m_z$) but by different easy axes, quantitatively described by ($m_x^2 - m_y^2$) which switches from "0" to "1" through the write voltage. This change is directly detected as a read signal through the inverse effect. The use of ($m_x^2 - m_y^2$) to represent a bit is a radical departure from the standard convention of using the magnetization ($m$) to represent information. We then show how the equivalent circuit can be used to build a device exhibiting tunable randomness and suggest possibilities for extending it to non-volatile memory with read and write capabilities, without the use of external magnetic fields or magnetic tunnel junctions.Comment: 6 pages, 4 figure

Design of a miniature permanent-magnet generator and energy storage system

The paper describes a methodology for optimizing the design and performance of a miniature permanent-magnet generator and its associated energy storage system. It combines an analytical field model, a lumped reluctance equivalent magnetic circuit, and an equivalent electrical circuit. Its utility is demonstrated by means of a case study on a 15-mW, 6000-r/min generator, and the analysis techniques are validated by measurements on a prototype system

The corrosion mechanisms for primer coated 2219-T87 aluminum

To investigate metal surface corrosion and the breakdown of metal protective coatings, the ac Impedance Method was applied to zinc chromate primer coated 2219-T87 aluminum. The EG&GPARC Model 368 ac Impedance Measurement System, along with dc measurements with the same system using the Polarization Resistance Method, was used to monitor changing properties of coated aluminum disks immersed in 3.5 percent NaCl solutions buffered at pH 5.5 and pH 8.2 over periods of 40 days each. The corrosion system can be represented by an electronic analog called an equivalent circuit consisting of resistors and capacitors in specific arrangements. This equivalent circuit parallels the impedance behavior of the corrosion system during a frequency scan. Values for resistances and capacitances, that can be assigned in the equivalent circuit following a least squares analysis of the data, describe changes occurring on the corroding metal surface and in the protective coatings. A suitable equivalent circuit has been determined which predicts the correct Bode phase and magnitude for the experimental sample. The dc corrosion current density data are related to equivalent circuit element parameters