553,807 research outputs found
Effect of the anodization voltage on the porewidening rate of nanoporous anodic alumina
A detailed study of the pore-widening rate of nanoporous anodic alumina
layers as a function of the anodization voltage was carried out. The study
focuses on samples produced under the same electrolyte and concentration but
different anodization voltages within the self-ordering regime. By means of
ellipsometry-based optical characterization, it is shown that in the
porewidening process, the porosity increases at a faster rate for lower
anodization voltages. This opens the possibility of obtaining three-dimensional
nanostructured nanoporous anodic alumina with controlled thickness and
refractive index of each layer, and with a refractive index difference of up to
0.24 between layers, for samples produced with oxalic acid electrolytes
Hybrid TiO2 Solar Cells Produced from Aerosolized Nanoparticles of Water-Soluble Polythiophene Electron Donor Layer
Hybrid solar cells (HSCs) with water soluble polythiophene sodium poly[2-(3-thienyl)-ethyloxy-4-butylsulfonate] (PTEBS) thin films produced using electrospray deposition (ESD) were fabricated, tested, and modeled and compared to devices produced using conventional spin coating. A single device structure of FTO/TiO2/PTEBS/Au was used to study the effects of ESD of the PTEBS layer on device performance. ESD was found to increase the short circuit current density (Jsc) by a factor of 2 while decreasing the open circuit voltage (Voc) by half compared to spin coated PTEBS films. Comparable efficiencies of 0.009% were achieved from both device construction types. Current-voltage curves were modeled using the characteristic solar cell equation and showed a similar increase in generated photocurrent with an increase by two orders of magnitude in the saturation current in devices from ESD films. Increases in Jsc are attributed to an increase in the interfacial contact area between the TiO2 and PTEBS layers, while decreases in Voc are attributed to incomplete film formation from ESD
Engineering the side facets of vertical [100] oriented InP nanowires for novel radial heterostructures
In addition to being grown on industry-standard orientation, vertical [100] oriented nanowires present novel families of facets and related cross-sectional shapes. These nanowires are engineered to achieve a number of facet combinations and cross-sectional shapes, by varying their growth parameters within ranges that facilitate vertical growth. In situ post-growth annealing technique is used to realise other combinations that are unattainable solely using growth parameters. Two examples of possible novel radial heterostructures grown on these vertical [100] oriented nanowire facets are presented, demonstrating their potential in future applications
Recent advances on recursive filtering and sliding mode design for networked nonlinear stochastic systems: A survey
Copyright © 2013 Jun Hu et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.Some recent advances on the recursive filtering and sliding mode design problems for nonlinear stochastic systems with network-induced phenomena are surveyed. The network-induced phenomena under consideration mainly include missing measurements, fading measurements, signal quantization, probabilistic sensor delays, sensor saturations, randomly occurring nonlinearities, and randomly occurring uncertainties. With respect to these network-induced phenomena, the developments on filtering and sliding mode design problems are systematically reviewed. In particular, concerning the network-induced phenomena, some recent results on the recursive filtering for time-varying nonlinear stochastic systems and sliding mode design for time-invariant nonlinear stochastic systems are given, respectively. Finally, conclusions are proposed and some potential future research works are pointed out.This work was supported in part by the National Natural Science Foundation of China under Grant nos. 61134009, 61329301, 61333012, 61374127 and 11301118, the Engineering and Physical Sciences Research Council (EPSRC) of the UK under Grant no. GR/S27658/01, the Royal Society of the UK, and the Alexander von Humboldt Foundation of Germany
Recommended from our members
Structure – Property relationships for nanofluids
This paper was presented at the 3rd Micro and Nano Flows Conference (MNF2011), which was held at the Makedonia Palace Hotel, Thessaloniki in Greece. The conference was organised by Brunel University and supported by the Italian Union of Thermofluiddynamics, Aristotle University of Thessaloniki, University of Thessaly, IPEM, the Process Intensification Network, the Institution of Mechanical Engineers, the Heat Transfer Society, HEXAG - the Heat Exchange Action Group, and the Energy Institute.Nanofluids refer to dilute liquid suspensions of nanoparticles in commonly used heat transfer liquids. They triggered much excitement since mid 1990s mainly owing to the claims of anomalous enhancement of thermal conductivity even at very low nanoparticle concentrations. There have been
numerous attempts to interpret the mechanism(s) that drive the displayed enhancement. A long debate within the research community supported by experimental and theoretical evidence has highlighted the nanoparticle
structuring as the dominant underlying mechanism. On the other hand the viscosity increase as a result of nanoparticle structuring raises concerns about their suitability for certain applications. This paper mainly discusses the structure – property relationship for nanofluids in microscopically static conditions
- …