Wireless Information and Energy Transfer for Two-Hop Non-Regenerative MIMO-OFDM Relay Networks

This paper investigates the simultaneous wireless information and energy transfer for the non-regenerative multipleinput multiple-output orthogonal frequency-division multiplexing (MIMO-OFDM) relaying system. By considering two practical receiver architectures, we present two protocols, time switchingbased relaying (TSR) and power splitting-based relaying (PSR). To explore the system performance limit, we formulate two optimization problems to maximize the end-to-end achievable information rate with the full channel state information (CSI) assumption. Since both problems are non-convex and have no known solution method, we firstly derive some explicit results by theoretical analysis and then design effective algorithms for them. Numerical results show that the performances of both protocols are greatly affected by the relay position. Specifically, PSR and TSR show very different behaviors to the variation of relay position. The achievable information rate of PSR monotonically decreases when the relay moves from the source towards the destination, but for TSR, the performance is relatively worse when the relay is placed in the middle of the source and the destination. This is the first time to observe such a phenomenon. In addition, it is also shown that PSR always outperforms TSR in such a MIMO-OFDM relaying system. Moreover, the effect of the number of antennas and the number of subcarriers are also discussed.Comment: 16 pages, 12 figures, to appear in IEEE Selected Areas in Communication

Energy-efficiency for MISO-OFDMA based user-relay assisted cellular networks

The concept of improving energy-efficiency (EE) without sacrificing the service quality has become important nowadays. The combination of orthogonal frequency-division multiple-access (OFDMA) multi-antenna transmission technology and relaying is one of the key technologies to deliver the promise of reliable and high-data-rate coverage in the most cost-effective manner. In this paper, EE is studied for the downlink multiple-input single-output (MISO)-OFDMA based user-relay assisted cellular networks. EE maximization is formulated for decode and forward (DF) relaying scheme with the consideration of both transmit and circuit power consumption as well as the data rate requirements for the mobile users. The quality of-service (QoS)-constrained EE maximization, which is defined for multi-carrier, multi-user, multi-relay and multi-antenna networks, is a non-convex and combinatorial problem so it is hard to tackle. To solve this difficult problem, a radio resource management (RRM) algorithm that solves the subcarrier allocation, mode selection and power allocation separately is proposed. The efficiency of the proposed algorithm is demonstrated by numerical results for different system parameter

Physical Layer Service Integration in 5G: Potentials and Challenges

High transmission rate and secure communication have been identified as the key targets that need to be effectively addressed by fifth generation (5G) wireless systems. In this context, the concept of physical-layer security becomes attractive, as it can establish perfect security using only the characteristics of wireless medium. Nonetheless, to further increase the spectral efficiency, an emerging concept, termed physical-layer service integration (PHY-SI), has been recognized as an effective means. Its basic idea is to combine multiple coexisting services, i.e., multicast/broadcast service and confidential service, into one integral service for one-time transmission at the transmitter side. This article first provides a tutorial on typical PHY-SI models. Furthermore, we propose some state-of-the-art solutions to improve the overall performance of PHY-SI in certain important communication scenarios. In particular, we highlight the extension of several concepts borrowed from conventional single-service communications, such as artificial noise (AN), eigenmode transmission etc., to the scenario of PHY-SI. These techniques are shown to be effective in the design of reliable and robust PHY-SI schemes. Finally, several potential research directions are identified for future work.Comment: 12 pages, 7 figure

Resource Allocation for Energy Harvesting Communications

With the rapid development of energy harvesting technologies, a new paradigm of wireless communications that employs energy harvesting transmitters has become a reality. The renewable energy source enables the flexible deployment of the transmitters and prolongs their lifetimes. To make the best use of the harvested energy, many challenging research issues arise from the new paradigm of communications. In particular, optimal resource (energy, bandwidth, etc.) allocation is key to the design of an efficient wireless system powered by renewable energy sources. In this thesis, we focus on several resource allocation problems for energy harvesting communications, including the energy allocation for a single energy harvesting transmitter, and the joint energy and spectral resource allocation for energy harvesting networks. More specifically, the resource allocation problems discussed in this thesis are summarized as follows. We solve the problem of designing an affordable optimal energy allocation strategy for the system of energy harvesting active networked tags (EnHANTs), that is adapted to the identification request and the energy harvesting dynamic. We formulate a Markov decision process (MDP) problem to optimize the overall system performance which takes into consideration of both the system activity-time and the communication reliability. To solve the problem, both a static exhaustive search method and a modified policy iteration algorithm are employed to obtain the optimal energy allocation policy. We develop an energy allocation algorithm to maximize the achievable rate for an access-controlled energy harvesting transmitter based on causal observations of the channel fading states. We formulate the stochastic optimization problem as a Markov decision process (MDP) with continuous states and define an approximate value function based on a piecewise linear fit in terms of the battery state. We show that with the approximate value function, the update in each iteration consists of a group of convex problems with a continuous parameter and we derive the optimal solution to these convex problems in closed-form. Specifically, the computational complexity of the proposed algorithm is significantly lower than that of the standard discrete MDP method. We propose an efficient iterative algorithm to obtain the optimal energy-bandwidth allocation for multiple flat-fading point-to-point channels, maximizing the weighted sum-rate given the predictions of the energy and channel state. For the special case that each transmitter only communicates with one receiver and the objective is to maximize the total throughput, we develop efficient algorithms for optimally solving the subproblems involved in the iterative algorithm. Moreover, a heuristic algorithm is also proposed for energy-bandwidth allocation based on the causal energy and channel observations. We consider the energy-bandwidth allocation problem in multiple orthogonal and non-orthogonal flat-fading broadcast channels to maximize the weighted sum-rate given the predictions of energy and channel states. To efficiently obtain the optimal allocation, we extend the iterative algorithm originally proposed for multiple flat-fading point-to-point channels and further develop the optimal algorithms to solve the corresponding subproblems. For the orthogonal broadcast channel, the proportionally-fair (PF) throughput maximization problem is formulated and we derive the equivalence conditions such that the optimal solution can be obtained by solving a weighted throughput maximization problem. The algorithm to obtain the proper weights is also proposed. We consider the energy-subchannel allocation problem for energy harvesting networks in frequency-selective fading channels. We first assume that the harvested energy and subchannel gains can be predicted and propose an algorithm to efficiently obtain the energy-subchannel allocations for all links over the scheduling period based on controlled water-filling. The proposed algorithm is shown to be asymptotically optimal when the bandwidth of the subchannel goes to zero. A causal algorithm is also proposed based on the Q-learning technique that makes use of the statistics of the energy harvesting and channel fading processes

Partially-Distributed Resource Allocation in Small-Cell Networks

We propose a four-stage hierarchical resource allocation scheme for the downlink of a large-scale small-cell network in the context of orthogonal frequency-division multiple access (OFDMA). Since interference limits the capabilities of such networks, resource allocation and interference management are crucial. However, obtaining the globally optimum resource allocation is exponentially complex and mathematically intractable. Here, we develop a partially decentralized algorithm to obtain an effective solution. The three major advantages of our work are: 1) as opposed to a fixed resource allocation, we consider load demand at each access point (AP) when allocating spectrum; 2) to prevent overloaded APs, our scheme is dynamic in the sense that as the users move from one AP to the other, so do the allocated resources, if necessary, and such considerations generally result in huge computational complexity, which brings us to the third advantage: 3) we tackle complexity by introducing a hierarchical scheme comprising four phases: user association, load estimation, interference management via graph coloring, and scheduling. We provide mathematical analysis for the first three steps modeling the user and AP locations as Poisson point processes. Finally, we provide results of numerical simulations to illustrate the efficacy of our scheme.Comment: Accepted on May 15, 2014 for publication in the IEEE Transactions on Wireless Communication

The design and optimization of cooperative mobile edge

As the world is charging towards the Internet of Things (IoT) era, an enormous amount of sensors will be rapidly empowered with internet connectivity. Besides the fact that the end devices are getting more diverse, some of them are also becoming more powerful, such that they can function as standalone mobile computing units with multiple wireless network interfaces. At the network end, various facilities are also pushed to the mobile edge to foster internet connections. Distributed small scale cloud resources and green energy harvesters can be directly attached to the deployed heterogeneous base stations. Different from the traditional wireless access networks, where the only dynamics come from the user mobility, the evolving mobile edge will be operated in the constantly changing and volatile environment. The harvested green energy will be highly dependent on the available energy sources, and the dense deployment of a variety of wireless access networks will result in intense radio resource contention. Consequently, the wireless networks are facing great challenges in terms of capacity, latency, energy/spectrum efficiency, and security. Equivalently, balancing the dynamic network resource demand and supply is essential to the smooth network operation. Leveraging the broadcasting nature of wireless data transmission, network nodes can cooperate with each other by either allowing users to connect with multiple base stations simultaneously or offloading user workloads to neighboring base stations. Moreover, grid facilitated and radio frequency signal enabled renewable energy sharing among network nodes are introduced in this dissertation. In particular, the smart grid can transfer the green energy harvested by each individual network node from one place to another. The network node can also transmit energy from one to another using radio frequency energy transfer. This dissertation addresses the cooperative network resource management to improve the energy efficiency of the mobile edge. First, the energy efficient cooperative data transmission scheme is designed to cooperatively allocate the radio resources of the wireless networks, including spectrum and power, to the mobile users. Then, the cooperative data transmission and wireless energy sharing scheme is designed to optimize both the energy and data transmission in the network. Finally, the cooperative data transmission and wired energy sharing scheme is designed to optimize the energy flow within the smart grid and the data transmission in the network. As future work, how to motivate multiple parties to cooperate and how to guarantee the security of the cooperative mobile edge is discussed. On one hand, the incentive scheme for each individual network node with distributed storage and computing resources is designed to improve network performance in terms of latency. On the other hand, how to leverage network cooperation to balance the tradeoff between efficiency (energy efficiency and latency) and security (confidentiality and privacy) is expounded

SWIPT Signalling over Frequency-Selective Channels with a Nonlinear Energy Harvester: Non-Zero Mean and Asymmetric Inputs

Simultaneous Wireless Information and Power Transmission (SWIPT) over a point-to-point frequency-selective channel is studied. Leveraging a small-signal model for a nonlinear energy harvester, a general form of delivered power in terms of system baseband parameters is derived, which demonstrates the dependency of the delivered power on higher moments of the baseband channel input. The optimization problem of maximizing Rate-Power (RP) region is studied. Assuming that the Channel State Information (CSI) is available at both the receiver and the transmitter, and constraining to non-zero mean Gaussian input distributions, an optimization algorithm for power allocation among different subchannels is studied. As a special case, optimality conditions for zero mean Gaussian inputs are derived. Results obtained from numerical optimization demonstrate the superiority of non-zero mean Gaussian inputs (with asymmetric power allocation in each complex subchannel) in yielding a larger RP region compared to their zero mean and non-zero mean (with symmetric power allocation in each complex subchannel) counterparts. The results motivate the design of new modulation for SWIPT and contrast with SWIPT design under linear energy harvesting, for which circularly symmetric Gaussian inputs with water-filling power allocation are optimal