Evolution of NOMA Toward Next Generation Multiple Access (NGMA) for 6G

Due to the explosive growth in the number of wireless devices and diverse wireless services, such as virtual/augmented reality and Internet-of-Everything, next generation wireless networks face unprecedented challenges caused by heterogeneous data traffic, massive connectivity, and ultra-high bandwidth efficiency and ultra-low latency requirements. To address these challenges, advanced multiple access schemes are expected to be developed, namely next generation multiple access (NGMA), which are capable of supporting massive numbers of users in a more resource- and complexity-efficient manner than existing multiple access schemes. As the research on NGMA is in a very early stage, in this paper, we explore the evolution of NGMA with a particular focus on non-orthogonal multiple access (NOMA), i.e., the transition from NOMA to NGMA. In particular, we first review the fundamental capacity limits of NOMA, elaborate on the new requirements for NGMA, and discuss several possible candidate techniques. Moreover, given the high compatibility and flexibility of NOMA, we provide an overview of current research efforts on multi-antenna techniques for NOMA, promising future application scenarios of NOMA, and the interplay between NOMA and other emerging physical layer techniques. Furthermore, we discuss advanced mathematical tools for facilitating the design of NOMA communication systems, including conventional optimization approaches and new machine learning techniques. Next, we propose a unified framework for NGMA based on multiple antennas and NOMA, where both downlink and uplink transmissions are considered, thus setting the foundation for this emerging research area. Finally, several practical implementation challenges for NGMA are highlighted as motivation for future work.Comment: 34 pages, 10 figures, a survey paper accepted by the IEEE JSAC special issue on Next Generation Multiple Acces

Multi-user visible light communications: State-of-the-art and future directions

Visible light communications (VLC) builds upon the dual use of existing lighting infrastructure for wireless data transmission. VLC has recently gained interest as cost-effective, secure, and energy-efficient wireless access technology particularly for indoor user-dense environments. While initial studies in this area are mainly limited to single-user point-to-point links, more recent efforts have focused on multi-user VLC systems in an effort to transform VLC into a scalable and fully networked wireless technology. In this paper, we provide a comprehensive overview of multi-user VLC systems discussing the recent advances on multi-user precoding, multiple access, resource allocation, and mobility management. We further provide possible directions for future research in this emerging topic.King Fahd University of Petroleum & Minerals, Dhahran, Saudi Arabia ; TÜBİTAKPublisher versio

Lights and Shadows: A Comprehensive Survey on Cooperative and Precoding Schemes to Overcome LOS Blockage and Interference in Indoor VLC

Visible light communications (VLC) have received significant attention as a way of moving part of the saturated indoor wireless traffic to the wide and unregulated visible optical spectrum. Nowadays, VLC are considered as a suitable technology, for several applications such as high-rate data transmission, supporting internet of things communications or positioning. The signal processing originally derived from radio-frequency (RF) systems such as cooperative or precoding schemes can be applied to VLC. However, its implementation is not straightforward. Furthermore, unlike RF transmission, VLC present a predominant line-of-sight link, although a weak non-LoS component may appear due to the reflection of the light on walls, floor, ceiling and nearby objects. Blocking effects may compromise the performance of the aforementioned transmission schemes. There exist several surveys in the literature focused on VLC and its applications, but the management of the shadowing and interference in VLC requires a comprehensive study. To fill this gap, this work introduces the implementation of cooperative and precoding schemes to VLC, while remarking their benefits and drawbacks for overcoming the shadowing effects. After that, the combination of both cooperative and precoding schemes is analyzed as a way of providing resilient VLC networks. Finally, we propose several open issues that the cooperative and precoding schemes must face in order to provide satisfactory VLC performance in indoor scenarios.This work has been supported partially by Spanish National Project TERESA-ADA(TEC2017-90093-C3-2-R) (MINECO/AEI/FEDER, UE), the research project GEOVEOLUZ-CM-UC3Mfunded by the call “Programa de apoyo a la realización de proyectos interdisciplinares de I+D parajóvenes investigadores de la Universidad Carlos III de Madrid 2019-2020” under the frame ofthe Convenio Plurianual Comunidad de Madrid-Universidad Carlos III de Madrid and projectMadrid Flight on Chip (Innovation Cooperative Projects Comunidad of Madrid - HUBS 2018/MadridFlightOnChip). Additionally, it has been supported partially by the Juan de la CiervaIncorporación grant IJC2019-040317-I and Juan de la Cierva Formación grant (FJC2019-039541-I/AEI/10.13039/501100011033)

System capacity enhancement for 5G network and beyond

A thesis submitted to the University of Bedfordshire, in fulfilment of the requirements for the degree of Doctor of PhilosophyThe demand for wireless digital data is dramatically increasing year over year. Wireless communication systems like Laptops, Smart phones, Tablets, Smart watch, Virtual Reality devices and so on are becoming an important part of people’s daily life. The number of mobile devices is increasing at a very fast speed as well as the requirements for mobile devices such as super high-resolution image/video, fast download speed, very short latency and high reliability, which raise challenges to the existing wireless communication networks. Unlike the previous four generation communication networks, the fifth-generation (5G) wireless communication network includes many technologies such as millimetre-wave communication, massive multiple-input multiple-output (MIMO), visual light communication (VLC), heterogeneous network (HetNet) and so forth. Although 5G has not been standardised yet, these above technologies have been studied in both academia and industry and the goal of the research is to enhance and improve the system capacity for 5G networks and beyond by studying some key problems and providing some effective solutions existing in the above technologies from system implementation and hardware impairments’ perspective. The key problems studied in this thesis include interference cancellation in HetNet, impairments calibration for massive MIMO, channel state estimation for VLC, and low latency parallel Turbo decoding technique. Firstly, inter-cell interference in HetNet is studied and a cell specific reference signal (CRS) interference cancellation method is proposed to mitigate the performance degrade in enhanced inter-cell interference coordination (eICIC). This method takes carrier frequency offset (CFO) and timing offset (TO) of the user’s received signal into account. By reconstructing the interfering signal and cancelling it afterwards, the capacity of HetNet is enhanced. Secondly, for massive MIMO systems, the radio frequency (RF) impairments of the hardware will degrade the beamforming performance. When operated in time duplex division (TDD) mode, a massive MIMO system relies on the reciprocity of the channel which can be broken by the transmitter and receiver RF impairments. Impairments calibration has been studied and a closed-loop reciprocity calibration method is proposed in this thesis. A test device (TD) is introduced in this calibration method that can estimate the transmitters’ impairments over-the-air and feed the results back to the base station via the Internet. The uplink pilots sent by the TD can assist the BS receivers’ impairment estimation. With both the uplink and downlink impairments estimates, the reciprocity calibration coefficients can be obtained. By computer simulation and lab experiment, the performance of the proposed method is evaluated. Channel coding is an essential part of a wireless communication system which helps fight with noise and get correct information delivery. Turbo codes is one of the most reliable codes that has been used in many standards such as WiMAX and LTE. However, the decoding process of turbo codes is time-consuming and the decoding latency should be improved to meet the requirement of the future network. A reverse interleave address generator is proposed that can reduce the decoding time and a low latency parallel turbo decoder has been implemented on a FPGA platform. The simulation and experiment results prove the effectiveness of the address generator and show that there is a trade-off between latency and throughput with a limited hardware resource. Apart from the above contributions, this thesis also investigated multi-user precoding for MIMO VLC systems. As a green and secure technology, VLC is achieving more and more attention and could become a part of 5G network especially for indoor communication. For indoor scenario, the MIMO VLC channel could be easily ill-conditioned. Hence, it is important to study the impact of the channel state to the precoding performance. A channel state estimation method is proposed based on the signal to interference noise ratio (SINR) of the users’ received signal. Simulation results show that it can enhance the capacity of the indoor MIMO VLC system

Rate-splitting multiple access for indoor visible light communication networks

Visible light communication (VLC) has been emerged as a technology that can increase the channel capacity in the next generations of wireless technologies by exploiting the largely unutilized, licence-free and huge visible light portion of the electromagnetic spectrum. In order to enable high-speed short-range wireless communications, VLC utilizes the installed high-switching rate light emitting diodes (LEDs) in the ceilings of indoor environments, which are primarily used for illumination, to modulate the signals into visible light intensity. However, VLC suffers from several limitations, such as the limited modulation bandwidth and the coverage area of LEDs that degrade the overall system spectral efficiency (SE). In this respect, the present contribution proposes rate splitting multiple access (RSMA) for multi-cell indoor VLC systems as a mean to enhance the overall system SE and energy efficiency (EE) as well as to provide ubiquitous indoor coverage and to address user mobility issues. Moreover, we utilize coordinated beamforming to design the precoders of the common and the private streams in each cell aiming to enhance the performance of cell-edge users. Finally, the formulated sum of the mean squared error optimization problem is solved sub-optimally using an alternating optimization approach. Extensive computer simulations demonstrate that RSMA improves the overall system performance in terms of the SE and EE compared to the recently used multiple access techniques, such as space division multiple access with coordinated beamforming which constitutes a special case of it.acceptedVersionPeer reviewe

Coordinated Beamforming Design for Multi-User Multi-Cell MIMO VLC Networks

Inter-cell interference (ICI) and inter-user interference (IUI) constitute a major issue towards achieving the optimum spectral efficiency (SE) and energy efficiency (EE) performance in multi-cell visible light communication (VLC) networks. Hence,advanced multiple access techniques need to be leveraged in order to improve the provided service to the users of such interfering networks. To this end,the present contribution proposes the integration of coordinated beamforming (CB) with rate-splitting multiple access (RSMA) in multi-cell VLC systems. Specifically,we consider the design of beamformers for the common and private streams in a coordinated manner between different attocells,which is shown to provide efficient mitigation of the incurred interference. Additionally,the formulated optimization problem aims to minimize the sum of the mean squared error across all attocells in order to jointly determine the optimum receive filters and coordinated transmit beamformers for RSMA streams. In this context,we illustrate through extensive computer simulations,which are carried out in a realistic setup that assumes noisy channel state information acquisition,the distinct flexibility and robustness of CB-based RSMA in mitigating the incurred interference. Finally,the offered results demonstrate the superiority of CB-based RSMA in terms of achievable SE and EE performance in multi-cell VLC networks compared to the conventional CB-based space division multiple access counterpart.publishedVersionPeer reviewe