An Ultra-Low-Power 75mV 64-Bit Current-Mode Majority-Function Adder

Ultra-low-power circuits are becoming more desirable due to growing portable device markets and they are also becoming more interesting and applicable today in biomedical, pharmacy and sensor networking applications because of the nano-metric scaling and CMOS reliability improvements. In this thesis, three main achievements are presented in ultra-low-power adders. First, a new majority function algorithm for carry and the sum generation is presented. Then with this algorithm and implied new architecture, we achieved a circuit with 75mV supply voltage operation. Last but not least, a 64 bit current-mode majority-function adder based on the new architecture and algorithm is successfully tested at 75mV supply voltage. The circuit consumed 4.5nW or 3.8pJ in one of the worst conditions

Straintronics: A Leap towards Ultimate Energy Efficiency of Magnetic Memory and Logic

After decades of exponential growth of the semiconductor industries, predicted by Moore’s Law, the complementary metal-oxide semiconductor (CMOS) circuits are approaching their end of the road, as the feature sizes reach sub-10nm regimes, leaving electrical engineers with a profusion of design challenges in terms of energy limitations and power density. The latter has left the road for alternative technologies wide open to help CMOS overcome the present challenges. Magnetic random access memories (MRAM) are one of the candidates to assist with aforesaid obstacles. Proposed in the early 90’s, MRAM has been under research and development for decades. The expedition for energy efficient MRAM is carried out by the fact that magnetic logic, potentially, has orders of magnitude lower switching energy compared to a charge-based CMOS logic since, in a nanomagnet, magnetic domains would self-align with each other. Regrettably, conventional methods for switching the state of the cell in an MRAM, field induced magnetization switching (FIMS) and spin transfer torque (STT), use electric current (flow of charges) to switch the state of the magnet, nullifying the energy advantage, stated above. In order to maximize the energy efficiency, the amount of charge required to switch the state of the MTJ should be minimized. To this end, straintronics, as an alternative energy efficient method to FIMS and STT to switch the state of a nanomagnet, is proposed recently. The method states that by combining piezoelectricity and inverse magnetostriction, the magnetization state of the device can flip, within few nano-seconds while reducing the switching energy by orders of magnitude compared to STT and FIMS. This research focuses on analysis, design, modeling, and applications of straintronics-based MTJ. The first goal is to perform an in-depth analysis on the static and dynamic behavior of the device. Next, we are aiming to increase the accuracy of the model by including the effect of temperature and thermal noise on the device’s behavior. The goal of performing such analysis is to create a comprehensive model of the device that predicts both static and dynamic responses of the magnetization to applied stress. The model will be used to interface the device with CMOS controllers and switches in large systems. Next, in an attempt to speed up the simulation of such devices in multi-megabyte memory systems, a liberal model has been developed by analytically approximating a solution to the magnetization dynamics, which should be numerically solved otherwise. The liberal model demonstrates more than two orders of magnitude speed improvement compared to the conventional numerical models. Highlighting the applications of the straintronics devices by combining such devices with peripheral CMOS circuitry is another goal of the research. Design of a proof-of-concept 2 kilo-bit nonvolatile straintronics-based memory was introduced in our recent work. To highlight the potential applications of the straintronics device, beyond data storage, the use of the principle in ultra-fast yet low power true random number generation and neuron/synapse design for artificial neural networks have been investigated. Lastly, in an attempt to investigate the practicality of the straintronics principle, the effect of process variations and interface imperfections on the switching behavior of the magnetization is investigated. The results reveal the destructive aftermath of fabrication imperfections on the switching pattern of the device, leaving careful pulse-shaping, alternative topologies, or combination with STT as the last resorts for successful strain-based magnetization switching.PHDElectrical EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/137010/1/barangi_1.pd

Neue Methodik zur Optimierung der Energieeffizienz des Künstlichen Akkommodationssystems

Das Künstliche Akkommodationssystem ist ein neuer Ansatz zur Wiederherstellung der Akkommodationsfähigkeit des menschlichen Auges. Das hochintegrierte, gekapselte Mikrosystem soll autonom die Funktion der natürlichen Linse übernehmen. Das Ziel der Arbeit besteht darin, eine neue Methodik zur Optimierung der Energieeffizienz des Künstlichen Akkommodationssystems zu entwickeln. Dazu werden Konzepte zur Optimierung der Spannungswandlung sowie Konzepte zur Reduktion der Leistungsaufnahme und zur Verlängerung der autonomen Betriebsdauer des Implantats vorgestellt