A study of topologies and protocols for fiber optic local area network

The emergence of new applications requiring high data traffic necessitates the development of high speed local area networks. Optical fiber is selected as the transmission medium due to its inherent advantages over other possible media and the dual optical bus architecture is shown to be the most suitable topology. Asynchronous access protocols, including token, random, hybrid random/token, and virtual token schemes, are developed and analyzed. Exact expressions for insertion delay and utilization at light and heavy load are derived, and intermediate load behavior is investigated by simulation. A new tokenless adaptive scheme whose control depends only on the detection of activity on the channel is shown to outperform round-robin schemes under uneven loads and multipacket traffic and to perform optimally at light load. An approximate solution to the queueing delay for an oscillating polling scheme under chaining is obtained and results are compared with simulation. Solutions to the problem of building systems with a large number of stations are presented, including maximization of the number of optical couplers, and the use of passive star/bus topologies, bridges and gateways

Design and implementation of high speed multimedia network.

by Yeung Chung Toa.Thesis (M.Phil.)--Chinese University of Hong Kong, 1994.Includes bibliographical references (leaves 63-[65]).Chapter 1 --- Introduction --- p.1Chapter 1.1 --- Bandwidth required by multimedia applications --- p.1Chapter 1.2 --- Real-time requirement --- p.2Chapter 1.3 --- Multicasting --- p.2Chapter 1.4 --- Other networks --- p.3Chapter 1.5 --- Overview of CUM LAUDE NET --- p.5Chapter 1.5.1 --- Protocols --- p.7Chapter 1.5.2 --- Network Services --- p.8Chapter 1.6 --- Scope of the Thesis --- p.9Chapter 2 --- Network Architecture --- p.11Chapter 2.1 --- CUM LAUDE NET Architectural Overview --- p.11Chapter 2.2 --- Level One Network Architecture --- p.12Chapter 2.3 --- Level-One Router --- p.14Chapter 2.3.1 --- packet forwarding --- p.14Chapter 2.3.2 --- packet insertion --- p.15Chapter 2.3.3 --- packet removal --- p.15Chapter 2.3.4 --- fault protection --- p.15Chapter 2.4 --- Hub --- p.16Chapter 2.5 --- Host & Network Interface Card --- p.17Chapter 3 --- Protocol --- p.19Chapter 3.1 --- Design Overview --- p.19Chapter 3.2 --- Layering --- p.20Chapter 3.3 --- "Segment, Datagram, and Packet Format" --- p.21Chapter 3.3.1 --- IP/VCI field --- p.23Chapter 3.4 --- Data Link --- p.23Chapter 3.4.1 --- byte format and data link synchronization --- p.23Chapter 3.4.2 --- access control byte --- p.24Chapter 3.4.3 --- packet/frame boundary --- p.26Chapter 3.5 --- Fast Packet Routing Protocol --- p.26Chapter 3.5.1 --- Level-2/Level-l Bridge/Router --- p.27Chapter 3.5.2 --- Level-1 Hub --- p.29Chapter 3.5.3 --- Local Host NIC --- p.29Chapter 3.6 --- Media Access Control Protocol I : ACTA --- p.30Chapter 3.7 --- Media Access Control Protocol II: Hub Polling --- p.34Chapter 3.8 --- Protocol Implementation on CUM LAUDE NET --- p.36Chapter 4 --- Hardware Implementation & Performance of Routers and NIC --- p.40Chapter 4.1 --- Functionality of Router --- p.40Chapter 4.2 --- Important Components Used in the Router Design --- p.43Chapter 4.2.1 --- TAXI Transmitter and Receiver --- p.43Chapter 4.2.2 --- First-In-First-Out Memory (FIFO) --- p.44Chapter 4.3 --- Design of Router --- p.45Chapter 4.3.1 --- Version 1 --- p.45Chapter 4.3.2 --- Version 2 --- p.47Chapter 4.3.3 --- Version 3 --- p.50Chapter 4.4 --- Lessons Learned from the High Speed Router Design --- p.57Chapter 5 --- Conclusion --- p.61Bibliography --- p.6

Investigation of the consumer electronics bus

The objectives of this dissertation are to investigate the performance of the Consumer Electronics Bus (CEBus) and to develop a theoretical formulation of the Carrier Sense Multiple Access with Contention Detection and Contention Resolution (CSMA/CDCR) with three priority classes protocol utilized by the CEBus A new priority channel assigned multiple access with embedded priority resolution (PAMA/PR) theoretical model is formulated. It incorporates the main features of the CEBus with three priority classes. The analytical results for throughput and delay obtained by this formulation were compared to simulation experiments. A close agreement has been found thus validated both theory and simulation models Moreover, the performance of the CEBus implemented with two physical media, the power line (PL) and twisted pair (TP) communication lines, was investigated by measuring message and channel throughputs and mean packet and message delays. The router was modeled as a node which can handle three priority levels simultaneously. Satisfactory performance was obtained. Finally, a gateway joining the CEBus to ISDN was designed and its perfor-mance was evaluated. This gateway provides access to ISDN-based services to the CEBus. The ISDN and CEBus system network architecture, gateway wiring, and data and signaling interface between the CEBus and ISDN were designed, analyzed, and discussed. Again, satisfactory performance was found