168 research outputs found
Multi-service systems: an enabler of flexible 5G air-interface
Multi-service system is an enabler to flexibly support
diverse communication requirements for the next generation
wireless communications. In such a system, multiple types of
services co-exist in one baseband system with each service having
its optimal frame structure and low out of band emission (OoBE)
waveforms operating on the service frequency band to reduce the
inter-service-band-interference (ISvcBI). In this article, a
framework for multi-service system is established and the
challenges and possible solutions are studied. The multi-service
system implementation in both time and frequency domain is
discussed. Two representative subband filtered multicarrier
(SFMC) waveforms: filtered orthogonal frequency division
multiplexing (F-OFDM) and universal filtered multi-carrier
(UFMC) are considered in this article. Specifically, the design
methodology, criteria, orthogonality conditions and prospective
application scenarios in the context of 5G are discussed. We
consider both single-rate (SR) and multi-rate (MR) signal
processing methods. Compared with the SR system, the MR
system has significantly reduced computational complexity at the
expense of performance loss due to inter-subband-interference
(ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems
are investigated with proposed low-complexity interference
cancelation algorithms to enable the multi-service operation in
low interference level conditions
Carrier Aggregation in Multi-Beam High Throughput Satellite Systems
Carrier Aggregation (CA) is an integral part of current terrestrial networks.
Its ability to enhance the peak data rate, to efficiently utilize the limited
available spectrum resources and to satisfy the demand for data-hungry
applications has drawn large attention from different wireless network
communities. Given the benefits of CA in the terrestrial wireless environment,
it is of great interest to analyze and evaluate the potential impact of CA in
the satellite domain. In this paper, we study CA in multibeam high throughput
satellite systems. We consider both inter-transponder and intra-transponder CA
at the satellite payload level of the communication stack, and we address the
problem of carrier-user assignment assuming that multiple users can be
multiplexed in each carrier. The transmission parameters of different carriers
are generated considering the transmission characteristics of carriers in
different transponders. In particular, we propose a flexible carrier allocation
approach for a CA-enabled multibeam satellite system targeting a proportionally
fair user demand satisfaction. Simulation results and analysis shed some light
on this rather unexplored scenario and demonstrate the feasibility of the CA in
satellite communication systems
Channel assembling and resource allocation in multichannel spectrum sharing wireless networks
Submitted in fulfilment of the academic requirements for the degree of
Doctor of Philosophy (Ph.D.) in Engineering, in the School of Electrical and
Information Engineering, Faculty of Engineering and the Built Environment,
at the University of the Witwatersrand, Johannesburg, South Africa, 2017The continuous evolution of wireless communications technologies has increasingly imposed a
burden on the use of radio spectrum. Due to the proliferation of new wireless networks applications
and services, the radio spectrum is getting saturated and becoming a limited resource. To a large
extent, spectrum scarcity may be a result of deficient spectrum allocation and management policies,
rather than of the physical shortage of radio frequencies. The conventional static spectrum
allocation has been found to be ineffective, leading to overcrowding and inefficient use. Cognitive
radio (CR) has therefore emerged as an enabling technology that facilitates dynamic spectrum
access (DSA), with a great potential to address the issue of spectrum scarcity and inefficient use.
However, provisioning of reliable and robust communication with seamless operation in cognitive
radio networks (CRNs) is a challenging task. The underlying challenges include development of
non-intrusive dynamic resource allocation (DRA) and optimization techniques.
The main focus of this thesis is development of adaptive channel assembling (ChA) and DRA
schemes, with the aim to maximize performance of secondary user (SU) nodes in CRNs, without
degrading performance of primary user (PU) nodes in a primary network (PN). The key objectives
are therefore four-fold. Firstly, to optimize ChA and DRA schemes in overlay CRNs. Secondly, to
develop analytical models for quantifying performance of ChA schemes over fading channels in
overlay CRNs. Thirdly, to extend the overlay ChA schemes into hybrid overlay and underlay
architectures, subject to power control and interference mitigation; and finally, to extend the
adaptive ChA and DRA schemes for multiuser multichannel access CRNs.
Performance analysis and evaluation of the developed ChA and DRA is presented, mainly through
extensive simulations and analytical models. Further, the cross validation has been performed
between simulations and analytical results to confirm the accuracy and preciseness of the novel
analytical models developed in this thesis. In general, the presented results demonstrate improved
performance of SU nodes in terms of capacity, collision probability, outage probability and forced
termination probability when employing the adaptive ChA and DRA in CRNs.CK201
Analysis Framework for Opportunistic Spectrum OFDMA and its Application to the IEEE 802.22 Standard
We present an analytical model that enables throughput evaluation of
Opportunistic Spectrum Orthogonal Frequency Division Multiple Access (OS-OFDMA)
networks. The core feature of the model, based on a discrete time Markov chain,
is the consideration of different channel and subchannel allocation strategies
under different Primary and Secondary user types, traffic and priority levels.
The analytical model also assesses the impact of different spectrum sensing
strategies on the throughput of OS-OFDMA network. The analysis applies to the
IEEE 802.22 standard, to evaluate the impact of two-stage spectrum sensing
strategy and varying temporal activity of wireless microphones on the IEEE
802.22 throughput. Our study suggests that OS-OFDMA with subchannel notching
and channel bonding could provide almost ten times higher throughput compared
with the design without those options, when the activity and density of
wireless microphones is very high. Furthermore, we confirm that OS-OFDMA
implementation without subchannel notching, used in the IEEE 802.22, is able to
support real-time and non-real-time quality of service classes, provided that
wireless microphones temporal activity is moderate (with approximately one
wireless microphone per 3,000 inhabitants with light urban population density
and short duty cycles). Finally, two-stage spectrum sensing option improves
OS-OFDMA throughput, provided that the length of spectrum sensing at every
stage is optimized using our model
An Adaptive Common Control Channel MAC with Transmission Opportunity in IEEE 802.11ac
Spectral utilization is a major challenge in wireless ad hoc networks due in part to using limited network resources. For ad hoc networks, the bandwidth is shared among stations that can transmit data at any point in time. It is important to maximize the throughput to enhance the network service. In this paper, we propose an adaptive multi-channel access with transmission opportunity protocol for multi-channel ad hoc networks, called AMCA-TXOP. For the purpose of coordination, the proposed protocol uses an adaptive common control channel over which the stations negotiate their channel selection based on the entire available bandwidth and then switch to the negotiated channel. AMCA-TXOP requires a single radio interface so that each station can listen to the control channel, which can overhear all agreements made by the other stations. This allows parallel transmission to multiple stations over various channels, prioritizing data traffic to achieve the quality-of-service requirements. The proposed approach can work with the 802.11ac protocol, which has expanded the bandwidth to 160 MHz by channel bonding. Simulations were conducted to demonstrate the throughput gains that can be achieved using the AMCA-TXOP protocol. Moreover, we compared our protocol with the IEEE 802.11ac standard protocols
Flight: A Flexible Light Communications network architecture for indoor environments
Recent experimental works have demonstrated the feasibility of the visible light based vehicular communications (VVLC) in intelligent transportation systems (ITS). However, in many respects, this technology is in its infancy and requires further research efforts in several areas. This work presents a flexible network architecture named flexible light (Flight), which is designed for VLC to tackle existing mobility challenges in the network environment. Flight proposes a low-latency handover system that decreases the handover delays to a few tens and hundreds of milliseconds. By means of experiments, we emulate and evaluate indoor mobile network scenarios using only VLC technology
Design And Implementation Of Up-Conversion Mixer And Lc-Quadrature Oscillator For IEEE 802.11a WLAN Transmitter Application Utilizing 0.18 Pm CMOS Technology [TK7871.99.M44 H279 2008 f rb].
Perlumbaan implementasi litar terkamil radio, dengan kos yang rendah telah menggalakkan penggunaan teknologi CMOS.
The drive for cost reduction has led to the use of CMOS technology for highly integrated radios
- …