33,225 research outputs found
Spectral Efficiency of MIMO Millimeter-Wave Links with Single-Carrier Modulation for 5G Networks
Future wireless networks will extensively rely upon bandwidths centered on
carrier frequencies larger than 10GHz. Indeed, recent research has shown that,
despite the large path-loss, millimeter wave (mmWave) frequencies can be
successfully exploited to transmit very large data-rates over short distances
to slowly moving users. Due to hardware complexity and cost constraints,
single-carrier modulation schemes, as opposed to the popular multi-carrier
schemes, are being considered for use at mmWave frequencies. This paper
presents preliminary studies on the achievable spectral efficiency on a
wireless MIMO link operating at mmWave in a typical 5G scenario. Two different
single-carrier modem schemes are considered, i.e. a traditional modulation
scheme with linear equalization at the receiver, and a single-carrier
modulation with cyclic prefix, frequency-domain equalization and FFT-based
processing at the receiver. Our results show that the former achieves a larger
spectral efficiency than the latter. Results also confirm that the spectral
efficiency increases with the dimension of the antenna array, as well as that
performance gets severely degraded when the link length exceeds 100 meters and
the transmit power falls below 0dBW. Nonetheless, mmWave appear to be very
suited for providing very large data-rates over short distances.Comment: 8 pages, 8 figures, to appear in Proc. 20th International ITG
Workshop on Smart Antennas (WSA2016
On the Frequency Dependency of Radio Channel's Delay Spread: Analyses and Findings From mmMAGIC Multi-frequency Channel Sounding
This paper analyzes the frequency dependency of the radio propagation
channel's root mean square (rms) delay spread (DS), based on the
multi-frequency measurement campaigns in the mmMAGIC project. The campaigns
cover indoor, outdoor, and outdoor-to-indoor (O2I) scenarios and a wide
frequency range from 2 to 86 GHz. Several requirements have been identified
that define the parameters which need to be aligned in order to make a
reasonable comparison among the different channel sounders employed for this
study. A new modelling approach enabling the evaluation of the statistical
significance of the model parameters from different measurements and the
establishment of a unified model is proposed. After careful analysis, the
conclusion is that any frequency trend of the DS is small considering its
confidence intervals. There is statistically significant difference from the
3GPP New Radio (NR) model TR 38.901, except for the O2I scenario.Comment: This paper has been accepted to the 2018 12th European Conference on
Antennas and Propagation (EuCAP), London, UK, April 201
Residual-based stabilization of the finite element approximation to the acoustic perturbation equations for low Mach number aeroacoustics
This is the peer reviewed version of the following article: [Guasch, O., Sánchez-MartĂn, P., Pont, A., Baiges, J., and Codina, R. (2016) Residual-based stabilization of the finite element approximation to the acoustic perturbation equations for low Mach number aeroacoustics. Int. J. Numer. Meth. Fluids, 82: 839–857. doi: 10.1002/fld.4243], which has been published in final form at http://onlinelibrary.wiley.com/doi/10.1002/fld.4243/abstract. This article may be used for non-commercial purposes in accordance with Wiley Terms and Conditions for Self-Archiving.The acoustic perturbation equations (APE) are suitable to predict aerodynamic noise in the presence of a non-uniform mean flow. As for any hybrid computational aeroacoustics approach, a first computational fluid dynamics simulation is carried out from which the mean flow characteristics and acoustic sources are obtained. In a second step, the APE are solved to get the acoustic pressure and particle velocity fields. However, resorting to the finite element method (FEM) for that purpose is not straightforward. Whereas mixed finite elements satisfying an appropriate inf–sup compatibility condition can be built in the case of no mean flow, that is, for the standard wave equation in mixed form, these are difficult to implement and their good performance is yet to be checked for more complex wave operators. As a consequence, strong simplifying assumptions are usually considered when solving the APE with FEM. It is possible to avoid them by resorting to stabilized formulations. In this work, a residual-based stabilized FEM is presented for the APE at low Mach numbers, which allows one to deal with the APE convective and reaction terms in its full extent. The key of the approach resides in the design of the matrix of stabilization parameters. The performance of the formulation and the contributions of the different terms in the equations are tested for an acoustic pulse propagating in sheared-solenoidal mean flow, and for the aeolian tone generated by flow past a two-dimensional cylinder.Peer ReviewedPostprint (author's final draft
- …