Topology Analysis of Wireless Sensor Networks for Sandstorm Monitoring

Sandstorms are serious natural disasters, which are commonly seen in the Middle East, Northern Africa, and Northern China.In these regions, sandstorms have caused massive damages to the natural environment, national economy, and human health. To avoid such damages, it is necessary to effectively monitor the origin and development of sandstorms. To this end, wireless sensor networks (WSNs) can be deployed in the regions where sandstorms generally originate so that sensor nodes can collaboratively perform sandstorm monitoring and rapidly convey the observations to remote administration center. Despite the potential advantages, the deployment of WSNs in the vicinity of sandstorms faces many unique challenges, such as the temporally buried sensors and increased path loss during sandstorms. Consequently, the WSNs may experience frequent disconnections during the sandstorms. This further leads to dynamically changing topology. In this paper, a topology analysis of the WSNs for sandstorm monitoring is performed. Four types of channels a sensor can utilize during sandstorms are analyzed, which include air-to-air channel, air-to-sand channel, sand-to-air channel, and sand-to-sand channel. Based on the channel model solutions, a percolation-based connectivity analysis is performed. It is shown that if the sensors are buried in low depth, allowing sensor to use multiple types of channels improves network connectivity. Accordingly, much smaller sensor density is required compared to the case, where only terrestrial air channels are used. Through this topology analysis a WSN architecture can be deployed for very efficient sandstorm monitoring

Percolation Driven Floodingf or Energy Efficient Routing in Dense Sensor Networks, Journal of Telecommunications and Information Technology, 2009, nr 2

Simple flooding algorithms are widely used in ad hoc sensor networks either for information dissemination or as building blocks of more sophisticated routing protocols. In this paper a percolation driven probabilistic flooding algorithm is proposed, which provides large message delivery ratio with small number of sent messages, compared to traditional flooding. To control the number of sent messages the proposed algorithm uses locally available information only, thus induces negligible overhead on network traffic. The performance of the algorithm is analyzed and the theoretical resultsare verified through simulation examples

Energy-efficient coverage with wireless sensors

Many sensor networks are deployed for the purpose of covering and monitoring a particular region, and detecting the object of interest in the region. In these applications, coverage is one of the centric problems in sensor networks. Such problem is centered around a basic question: ``How well can the sensors observe the physical world?\u27\u27 The concept of coverage can be interpreted as a measure of quality of service provided by the sensing function in various ways depending on sensor devices and applications. On the other hand, sensor nodes are usually battery-powered and subject to limitations based on the available battery energy. It is, therefore, critical to design, deploy and operate a wireless sensor network in an energy-efficient manner, while satisfying the coverage requirement. In order to prolong the lifetime of a sensor network, we explore the notion of connected-k-coverage in sensor networks. It requires the monitored region to be k-covered by a connected component of active sensors, which is less demanding than requiring k-coverage and connectivity among all active sensors simultaneously. We investigate the theoretical foundations about connected-k-coverage and, by using the percolation theorem, we derive the critical conditions for connected-k-coverage for various relations between sensors\u27 sensing radius and communication range. In addition, we derive an effective lower bound on the probability of connected-k-coverage, and propose a simple randomized scheduling algorithm and select proper operational parameters to prolong the lifetime of a large-scale sensor network. It has been shown that sensors\u27 collaboration (information fusion) can improve object detection performance and area coverage in sensor networks. The sensor coverage problem in this situation is regarded as information coverage. Based on a probabilistic sensing model, we study the object detection problem and develop a novel on-demand framework (decision fusion-based) for collaborative object detection in wireless sensor networks, where inactive sensors can be triggered by nearby active sensors to collaboratively sense and detect the object. By using this framework, we can significantly improve the coverage performance of the sensor networks, while the network power consumption can be reduced. Then, we proceed to study the barrier information coverage problem under the similar assumption that neighboring sensors may collaborate with each other to form a virtual sensor which makes the detection decision based on combined sensed readings. We propose both centralized and distributed schemes to operate a sensor network to information-cover a barrier efficiently. At last, we propose and study a multi-round sensor deployment strategy based on line-based sensor deployment model, which can use the fewest sensors to cover a barrier. We have an interesting discovery that the optimal two-round sensor deployment strategy yields the same barrier coverage performance as other optimal strategies with more than two rounds. This result is particularly encouraging as it implies that the best barrier coverage performance can be achieved with low extra deployment cost by deploying sensors in two rounds. In addition, two practical solutions are presented to deal with realistic situations when the distribution of a sensor\u27s residence point is not fully known

On the Development of Distributed Estimation Techniques for Wireless Sensor Networks

Wireless sensor networks (WSNs) have lately witnessed tremendous demand, as evidenced by the increasing number of day-to-day applications. The sensor nodes aim at estimating the parameters of their corresponding adaptive filters to achieve the desired response for the event of interest. Some of the burning issues related to linear parameter estimation in WSNs have been addressed in this thesis mainly focusing on reduction of communication overhead and latency, and robustness to noise. The first issue deals with the high communication overhead and latency in distributed parameter estimation techniques such as diffusion least mean squares (DLMS) and incremental least mean squares (ILMS) algorithms. Subsequently the poor performance demonstrated by these distributed techniques in presence of impulsive noise has been dealt separately. The issue of source localization i.e. estimation of source bearing in WSNs, where the existing decentralized algorithms fail to perform satisfactorily, has been resolved in this thesis. Further the same issue has been dealt separately independent of nodal connectivity in WSNs. This thesis proposes two algorithms namely the block diffusion least mean squares (BDLMS) and block incremental least mean squares (BILMS) algorithms for reducing the communication overhead in WSNs. The theoretical and simulation studies demonstrate that BDLMS and BILMS algorithms provide the same performances as that of DLMS and ILMS, but with significant reduction in communication overheads per node. The latency also reduces by a factor as high as the block-size used in the proposed algorithms. With an aim to develop robustness towards impulsive noise, this thesis proposes three robust distributed algorithms i.e. saturation nonlinearity incremental LMS (SNILMS), saturation nonlinearity diffusion LMS (SNDLMS) and Wilcoxon norm diffusion LMS (WNDLMS) algorithms. The steady-state analysis of SNILMS algorithm is carried out based on spatial-temporal energy conservation principle. The theoretical and simulation results show that these algorithms are robust to impulsive noise. The SNDLMS algorithm is found to provide better performance than SNILMS and WNDLMS algorithms. In order to develop a distributed source localization technique, a novel diffusion maximum likelihood (ML) bearing estimation algorithm is proposed in this thesis which needs less communication overhead than the centralized algorithms. After forming a random array with its neighbours, each sensor node estimates the source bearing by optimizing the ML function locally using a diffusion particle swarm optimization algorithm. The simulation results show that the proposed algorithm performs better than the centralized multiple signal classification (MUSIC) algorithm in terms of probability of resolution and root mean square error. Further, in order to make the proposed algorithm independent of nodal connectivity, a distributed in-cluster bearing estimation technique is proposed. Each cluster of sensors estimates the source bearing by optimizing the ML function locally in cooperation with other clusters. The simulation results demonstrate improved performance of the proposed method in comparison to the centralized and decentralized MUSIC algorithms, and the distributed in-network algorith

Modeling, analysis, and optimization for wireless networks in the presence of heavy tails

The heavy-tailed traffic from wireless users, caused by the emerging Internet and multimedia applications, induces extremely dynamic and variable network environment, which can fundamentally change the way in which wireless networks are conceived, designed, and operated. This thesis is concerned with modeling, analysis, and optimization of wireless networks in the presence of heavy tails. First, a novel traffic model is proposed, which captures the inherent relationship between the traffic dynamics and the joint effects of the mobility variability of network users and the spatial correlation in their observed physical phenomenon. Next, the asymptotic delay distribution of wireless users is analyzed under different traffic patterns and spectrum conditions, which reveals the critical conditions under which wireless users can experience heavy-tailed delay with significantly degraded QoS performance. Based on the delay analysis, the fundamental impact of heavy-tailed environment on network stability is studied. Specifically, a new network stability criterion, namely moment stability, is introduced to better characterize the QoS performance in the heavy-tailed environment. Accordingly, a throughput-optimal scheduling algorithm is proposed to maximize network throughput while guaranteeing moment stability. Furthermore, the impact of heavy-tailed spectrum on network connectivity is investigated. Towards this, the necessary conditions on the existence of delay-bounded connectivity are derived. To enhance network connectivity, the mobility-assisted data forwarding scheme is exploited, whose important design parameters, such as critical mobility radius, are derived. Moreover, the latency in wireless mobile networks is analyzed, which exhibits asymptotic linearity in the initial distance between mobile users.Ph.D