Future Evolution of CSMA Protocols for the IEEE 802.11 Standard

In this paper a candidate protocol to replace the prevalent CSMA/CA medium access control in Wireless Local Area Networks is presented. The proposed protocol can achieve higher throughput than CSMA/CA, while maintaining fairness, and without additional implementation complexity. Under certain circumstances, it is able to reach and maintain collision-free operation, even when the number of contenders is variable and potentially large. It is backward compatible, allowing for new and legacy stations to coexist without degrading one another's performance, a property that can make the adoption process by future versions of the standard smooth and inexpensive.Comment: This paper has been accepted in the Second IEEE ICC Workshop 2013 on Telecommunication Standards: From Research to Standard

Scheduling for next generation WLANs: filling the gap between offered and observed data rates

In wireless networks, opportunistic scheduling is used to increase system throughput by exploiting multi-user diversity. Although recent advances have increased physical layer data rates supported in wireless local area networks (WLANs), actual throughput realized are significantly lower due to overhead. Accordingly, the frame aggregation concept is used in next generation WLANs to improve efficiency. However, with frame aggregation, traditional opportunistic schemes are no longer optimal. In this paper, we propose schedulers that take queue and channel conditions into account jointly, to maximize throughput observed at the users for next generation WLANs. We also extend this work to design two schedulers that perform block scheduling for maximizing network throughput over multiple transmission sequences. For these schedulers, which make decisions over long time durations, we model the system using queueing theory and determine users' temporal access proportions according to this model. Through detailed simulations, we show that all our proposed algorithms offer significant throughput improvement, better fairness, and much lower delay compared with traditional opportunistic schedulers, facilitating the practical use of the evolving standard for next generation wireless networks

IEEE 802.11 parameters adaptation for Performance enhancement in high density Wireless networks

Tribunal : Ramón Agüero, Álvaro Martín, Federico LarrocaNowadays, it is common to find wireless networks that are based on the IEEE 802.11 standard deployed in an unplanned and unmanaged manner. Moreover, because of the low hardware cost and, trying to obtain optimal coverage and performance, a large number of devices are usually installed in reduced spaces generating high-density deployments. This kind of networks experiment a myriad of problems (e.g., interference, medium access control, etc.) related with the shared nature of the transmission medium. In recent years, different physical-layer- and link-layer-adaptation mechanisms have been proposed to palliate those problems, however, their feedback-loop-based behaviour in a highly complex RF medium makes their performance hard to assess. In this work, we study the problems of high-density networks, experimentally evaluate some existing solutions and propose a new adaptation mechanism, PRCS, that tackles some common weakness of those solutions. PRCS control the transmit power, the data rate, and the carrier sense threshold of APs of a wireless network so as to mitigate the effects of interference in high-density deployments without causing unfairness between links. In simulation-based experiments, PRCS outperforms similar existing mechanisms in various scenarios and in a particular scenario, where most mechanisms fail, duplicates global network throughput.En la actualidad, es muy común encontrar redes inalámbricas basadas en el estándar IEEE 802.11 desplegadas de manera no planificada ni gestionada. Además, debido al bajo costo de los dispositivos y con la intención de obtener una cobertura y rendimiento óptimos, un gran número de dispositivos son instalados en espacios reducidos, generado despliegues de alta densidad. Este tipo de redes experimentan una gran variedad de problemas (por ej., interferencia, control de acceso al medio, etc.) relacionados con el hecho de que utilizan un medio de transmisión compartido. En los últimos años, diferentes mecanismos de adaptación de parámetros de la capa física y de enlace han sido propuestos con el objetivo de mitigar estos problemas. Estas soluciones adaptan parámetros tales como la potencia de transmisión o la tasa de transmisión. En este trabajo, estudiamos los problemas de las redes inalámbricas de alta densidad, evaluamos mediante experimentos algunas de las soluciones existentes y proponemos un nuevo mecanismo de adaptación, PRCS, que aborda algunas de las debilidades de estas soluciones. PRCS controla la potencia de transmisión, la tasa de transmisión y el umbral del mecanismo de sensado de portadora de los puntos de acceso de una red inalámbrica. El objetivo de este mecanismo es mitigar los efectos de la interferencia en despliegues de alta densidad sin causar asimetrías entre los enlaces. En experimentos basados en simulaciones, mostramos que PRCS supera a los mecanismos existentes en varios escenarios y, en un escenario en particular donde la mayoría de los mecanismos fallan, duplica el rendimiento global de la red

Subjective Audio Quality over a Secure IEEE 802.11n Draft 2.0 Wireless Local Area Network

This thesis investigates the quality of audio generated by a G.711 codec and transmission over an IEEE 802.11n draft 2.0 wireless local area network (WLAN). Decline in audio quality due to additional calls or by securing the WLAN with transport mode Internet Protocol Security (IPsec) is quantified. Audio quality over an IEEE 802.11n draft 2.0 WLAN is also compared to that of IEEE 802.11b and IEEE 802.11g WLANs under the same conditions. Audio quality is evaluated by following International Telecommunication Union Telecommunication Standardization Sector (ITU-T) Recommendation P.800, where human subjects rate audio clips recorded during various WLAN configurations. The Mean Opinion Score (MOS) is calculated as the average audio quality score given for each WLAN configuration. An 85% confidence interval is calculated for each MOS. Results suggest that audio quality over an IEEE 802.11n draft 2.0 WLAN is not higher than over an IEEE 802.11b WLAN when up to 10 simultaneous G.711 calls occur. A linear regression of the subjective scores also suggest that an IEEE 802.11n draft 2.0 WLAN can sustain an MOS greater than 3.0 (fair quality) for up to 75 simultaneous G.711 calls secured with WPA2, or up to 40 calls secured with both WPA2 and transport mode IPsec. The data strongly suggest that toll quality audio (MOS ≥ 4.0) is not currently practical over IEEE 802.11 WLANs secured with WPA2, even with the G.711 codec

Wi-Fi Teeter-Totter: Overclocking OFDM for Internet of Things

The conventional high-speed Wi-Fi has recently become a contender for low-power Internet-of-Things (IoT) communications. OFDM continues its adoption in the new IoT Wi-Fi standard due to its spectrum efficiency that can support the demand of massive IoT connectivity. While the IoT Wi-Fi standard offers many new features to improve power and spectrum efficiency, the basic physical layer (PHY) structure of transceiver design still conforms to its conventional design rationale where access points (AP) and clients employ the same OFDM PHY. In this paper, we argue that current Wi-Fi PHY design does not take full advantage of the inherent asymmetry between AP and IoT. To fill the gap, we propose an asymmetric design where IoT devices transmit uplink packets using the lowest power while pushing all the decoding burdens to the AP side. Such a design utilizes the sufficient power and computational resources at AP to trade for the transmission (TX) power of IoT devices. The core technique enabling this asymmetric design is that the AP takes full power of its high clock rate to boost the decoding ability. We provide an implementation of our design and show that it can reduce the IoT's TX power by boosting the decoding capability at the receivers