3,190 research outputs found
The COST IRACON Geometry-based Stochastic Channel Model for Vehicle-to-Vehicle Communication in Intersections
Vehicle-to-vehicle (V2V) wireless communications can improve traffic safety
at road intersections and enable congestion avoidance. However, detailed
knowledge about the wireless propagation channel is needed for the development
and realistic assessment of V2V communication systems. We present a novel
geometry-based stochastic MIMO channel model with support for frequencies in
the band of 5.2-6.2 GHz. The model is based on extensive high-resolution
measurements at different road intersections in the city of Berlin, Germany. We
extend existing models, by including the effects of various obstructions,
higher order interactions, and by introducing an angular gain function for the
scatterers. Scatterer locations have been identified and mapped to measured
multi-path trajectories using a measurement-based ray tracing method and a
subsequent RANSAC algorithm. The developed model is parameterized, and using
the measured propagation paths that have been mapped to scatterer locations,
model parameters are estimated. The time variant power fading of individual
multi-path components is found to be best modeled by a Gamma process with an
exponential autocorrelation. The path coherence distance is estimated to be in
the range of 0-2 m. The model is also validated against measurement data,
showing that the developed model accurately captures the behavior of the
measured channel gain, Doppler spread, and delay spread. This is also the case
for intersections that have not been used when estimating model parameters.Comment: Submitted to IEEE Transactions on Vehicular Technolog
A Measurement Based Shadow Fading Model for Vehicle-to-Vehicle Network Simulations
The vehicle-to-vehicle (V2V) propagation channel has significant implications
on the design and performance of novel communication protocols for vehicular ad
hoc networks (VANETs). Extensive research efforts have been made to develop V2V
channel models to be implemented in advanced VANET system simulators for
performance evaluation. The impact of shadowing caused by other vehicles has,
however, largely been neglected in most of the models, as well as in the system
simulations. In this paper we present a shadow fading model targeting system
simulations based on real measurements performed in urban and highway
scenarios. The measurement data is separated into three categories,
line-of-sight (LOS), obstructed line-of-sight (OLOS) by vehicles, and non
line-of-sight due to buildings, with the help of video information recorded
during the measurements. It is observed that vehicles obstructing the LOS
induce an additional average attenuation of about 10 dB in the received signal
power. An approach to incorporate the LOS/OLOS model into existing VANET
simulators is also provided. Finally, system level VANET simulation results are
presented, showing the difference between the LOS/OLOS model and a channel
model based on Nakagami-m fading.Comment: 10 pages, 12 figures, submitted to Hindawi International Journal of
Antennas and Propagatio
On Multilink Shadowing Effects in Measured V2V Channels on Highway
Shadowing from vehicles can degrade the performance of vehicle-to-vehicle (V2V) communication systems significantly. It is thus important to characterize and model the influence of common shadowing objects like cars properly. For multilink systems it is essential to model the joint effects on the different links. However, the multilink shadowing effects in V2V channels are not yet well understood. In this paper we present a measurement based analysis of multilink shadowing effects in V2V communication systems with cars as blocking objects. In particular we analyze and characterize the joint large scale fading process for multilink communication at 5.9 GHz between four cars in a highway scenario. From our analysis it is found that the coherence time of the large scale fading process for different links can vary from a few seconds to minutes. The results show that it is essential to consider the correlation of the large scale fading processes as the correlation coefficients can have both large negative and large positive values. There is also a clear indication that multihop techniques provide an efficient way to overcome the issue with shadowed cars in V2V systems
LTE and Millimeter Waves for V2I Communications: an End-to-End Performance Comparison
The Long Term Evolution (LTE) standard enables, besides cellular
connectivity, basic automotive services to promote road safety through
vehicle-to-infrastructure (V2I) communications. Nevertheless, stakeholders and
research institutions, driven by the ambitious technological advances expected
from fully autonomous and intelligent transportation systems, have recently
investigated new radio technologies as a means to support vehicular
applications. In particular, the millimeter wave (mmWave) spectrum holds great
promise because of the large available bandwidth that may provide the required
link capacity. Communications at high frequencies, however, suffer from severe
propagation and absorption loss, which may cause communication disconnections
especially considering high mobility scenarios. It is therefore important to
validate, through simulations, the actual feasibility of establishing V2I
communications in the above-6 GHz bands. Following this rationale, in this
paper we provide the first comparative end-to-end evaluation of the performance
of the LTE and mmWave technologies in a vehicular scenario. The simulation
framework includes detailed measurement-based channel models as well as the
full details of MAC, RLC and transport protocols. Our results show that,
although LTE still represents a promising access solution to guarantee robust
and fair connections, mmWaves satisfy the foreseen extreme throughput demands
of most emerging automotive applications.Comment: 7 pages, 5 figures, 2 tables. Accepted to VTC-Spring 2019, workshop
on High Mobility Wireless Communications (HMWC
- …