2,941 research outputs found
Recommended from our members
A three-stage optimization methodology for envelope design of passive house considering energy demand, thermal comfort and cost
Due to reducing the reliance of buildings on fossil fuels, Passive House (PH) is receiving more and more attention. It is important that integrated optimization of passive performance by considering energy demand, cost and thermal comfort. This paper proposed a set three-stage multi-objective optimization method that combines redundancy analysis (RDA), Gradient Boosted Decision Trees (GBDT) and Non-dominated sorting genetic algorithm (NSGA-II) for PH design. The method has strong engineering applicability, by reducing the model complexity and improving efficiency. Among then, the GBDT algorithm was first applied to the passive performance optimization of buildings, which is used to build meta-models of building performance. Compared with the commonly used meta-model, the proposed models demonstrate superior robustness with the standard deviation at 0.048. The optimization results show that the energy-saving rate is about 88.2% and the improvement of thermal comfort is about 37.8% as compared to the base-case building. The economic analysis, the payback period were used to integrate initial investment and operating costs, the minimum payback period and uncomfortable level of Pareto frontier solution are 0.48 years and 13.1%, respectively. This study provides the architects rich and valuable information about the effects of the parameters on the different building performance
Facilitating the implementation of neural network-based predictive control to optimize building heating operation
Simple neural network (NN) architecture is a reliable tool to transform reactive rule-based systems into predictive systems. Thermal comfort is of utmost importance in office buildings, which need the activation of heating systems at an optimal time. A high-performance NN predictive system requires a large training dataset. This can limit system efficiency due to the lack of enough historical data derived from thermal controllers. To address this issue, we generated, trained and tested a dataset of eight sizes using a calibrated building model. A set of key performance indicators (KPIs) was improved by studying the output performance. The effect of normalization and standardization preprocessing techniques on NN prediction ability was studied. Learning curves showed that a minimum of 1–4 months of data are required to obtain enough accuracy. Two heating seasons provide the optimal data size to calibrate the NN properly with high prediction accuracy. The results also revealed that building data from =two years slightly improve NN performance. The most accurate results in KPIs 90%) were obtained with preprocessed data. The effect of preprocessing on large training patterns was less than that of training patterns <100. Finally, NN model performance was less accurate in cold climate zonesThe authors gratefully acknowledge the support by Catalan agency AGAUR through their research group support program (2017SGR00227)Peer ReviewedPostprint (published version
Submodular Load Clustering with Robust Principal Component Analysis
Traditional load analysis is facing challenges with the new electricity usage
patterns due to demand response as well as increasing deployment of distributed
generations, including photovoltaics (PV), electric vehicles (EV), and energy
storage systems (ESS). At the transmission system, despite of irregular load
behaviors at different areas, highly aggregated load shapes still share similar
characteristics. Load clustering is to discover such intrinsic patterns and
provide useful information to other load applications, such as load forecasting
and load modeling. This paper proposes an efficient submodular load clustering
method for transmission-level load areas. Robust principal component analysis
(R-PCA) firstly decomposes the annual load profiles into low-rank components
and sparse components to extract key features. A novel submodular cluster
center selection technique is then applied to determine the optimal cluster
centers through constructed similarity graph. Following the selection results,
load areas are efficiently assigned to different clusters for further load
analysis and applications. Numerical results obtained from PJM load demonstrate
the effectiveness of the proposed approach.Comment: Accepted by 2019 IEEE PES General Meeting, Atlanta, G
Recommended from our members
State-of-the-art on research and applications of machine learning in the building life cycle
Fueled by big data, powerful and affordable computing resources, and advanced algorithms, machine learning has been explored and applied to buildings research for the past decades and has demonstrated its potential to enhance building performance. This study systematically surveyed how machine learning has been applied at different stages of building life cycle. By conducting a literature search on the Web of Knowledge platform, we found 9579 papers in this field and selected 153 papers for an in-depth review. The number of published papers is increasing year by year, with a focus on building design, operation, and control. However, no study was found using machine learning in building commissioning. There are successful pilot studies on fault detection and diagnosis of HVAC equipment and systems, load prediction, energy baseline estimate, load shape clustering, occupancy prediction, and learning occupant behaviors and energy use patterns. None of the existing studies were adopted broadly by the building industry, due to common challenges including (1) lack of large scale labeled data to train and validate the model, (2) lack of model transferability, which limits a model trained with one data-rich building to be used in another building with limited data, (3) lack of strong justification of costs and benefits of deploying machine learning, and (4) the performance might not be reliable and robust for the stated goals, as the method might work for some buildings but could not be generalized to others. Findings from the study can inform future machine learning research to improve occupant comfort, energy efficiency, demand flexibility, and resilience of buildings, as well as to inspire young researchers in the field to explore multidisciplinary approaches that integrate building science, computing science, data science, and social science
- …