Static random-access memory designs based on different FinFET at lower technology node (7nm)

Title from PDF of title page viewed January 15, 2020Thesis advisor: Masud H ChowdhuryVitaIncludes bibliographical references (page 50-57)Thesis (M.S.)--School of Computing and Engineering. University of Missouri--Kansas City, 2019The Static Random-Access Memory (SRAM) has a significant performance impact on current nanoelectronics systems. To improve SRAM efficiency, it is important to utilize emerging technologies to overcome short-channel effects (SCE) of conventional CMOS. FinFET devices are promising emerging devices that can be utilized to improve the performance of SRAM designs at lower technology nodes. In this thesis, I present detail analysis of SRAM cells using different types of FinFET devices at 7nm technology. From the analysis, it can be concluded that the performance of both 6T and 8T SRAM designs are improved. 6T SRAM achieves a 44.97% improvement in the read energy compared to 8T SRAM. However, 6T SRAM write energy degraded by 3.16% compared to 8T SRAM. Read stability and write ability of SRAM cells are determined using Static Noise Margin and N- curve methods. Moreover, Monte Carlo simulations are performed on the SRAM cells to evaluate process variations. Simulations were done in HSPICE using 7nm Asymmetrical Underlap FinFET technology. The quasiplanar FinFET structure gained considerable attention because of the ease of the fabrication process [1] – [4]. Scaling of technology have degraded the performance of CMOS designs because of the short channel effects (SCEs) [5], [6]. Therefore, there has been upsurge in demand for FinFET devices for emerging market segments including artificial intelligence and cloud computing (AI) [8], [9], Internet of Things (IoT) [10] – [13] and biomedical [17] –[18] which have their own exclusive style of design. In recent years, many Underlapped FinFET devices were proposed to have better control of the SCEs in the sub-nanometer technologies [3], [4], [19] – [33]. Underlap on either side of the gate increases effective channel length as seen by the charge carriers. Consequently, the source-to-drain tunneling probability is improved. Moreover, edge direct tunneling leakage components can be reduced by controlling the electric field at the gate-drain junction . There is a limitation on the extent of underlap on drain or source sides because the ION is lower for larger underlap. Additionally, FinFET based designs have major width quantization issue. The width of a FinFET device increases only in quanta of silicon fin height (HFIN) [4]. The width quantization issue becomes critical for ratioed designs like SRAMs, where proper sizing of the transistors is essential for fault-free operation. FinFETs based on Design/Technology Co-Optimization (DTCO_F) approach can overcome these issues [38]. DTCO_F follows special design rules, which provides the specifications for the standard SRAM cells with special spacing rules and low leakages. The performances of 6T SRAM designs implemented by different FinFET devices are compared for different pull-up, pull down and pass gate transistor (PU: PD:PG) ratios to identify the best FinFET device for high speed and low power SRAM applications. Underlapped FinFETs (UF) and Design/Technology Co-Optimized FinFETs (DTCO_F) are used for the design and analysis. It is observed that with the PU: PD:PG ratios of 1:1:1 and 1:5:2 for the UF-SRAMs the read energy has degraded by 3.31% and 48.72% compared to the DTCO_F-SRAMs, respectively. However, the read energy with 2:5:2 ratio has improved by 32.71% in the UF-SRAM compared to the DTCO_F-SRAMs. The write energy with 1:1:1 configuration has improved by 642.27% in the UF-SRAM compared to the DTCO_F-SRAM. On the other hand, the write energy with 1:5:2 and 2:5:2 configurations have degraded by 86.26% and 96% in the UF-SRAMs compared to the DTCO_F-SRAMs. The stability and reliability of different SRAMs are also evaluated for 500mV supply. From the analysis, it can be concluded that Asymmetrical Underlapped FinFET is better for high-speed applications and DTCO FinFET for low power applications.Introduction -- Next generation high performance device: FinFET -- FinFET based SRAM bitcell designs -- Benchmarking of UF-SRAMs and DTCO-F-SRAMS -- Collaborative project -- Internship experience at INTEL and Marvell Semiconductor -- Conclusion and future wor

A novel optimization framework for controlling stabilization issue in design principle of FinFET based SRAM

The conventional design principle of the finFET offers various constraints that act as an impediment towards improving ther performance of finFET SRAM. After reviewing existing approaches, it has been found that there are not enough work found to be emphasizing on cost-effective optimization by addressing the stability problems in finFET design.Therefore, the proposed system introduces a novel optimization mechanism considering some essential design attributes e.g. area, thickness of fin, and number of components. The contribution of the proposed technique is to determine the better form of thickness of fin and its related aspect that can act as a solution to minimize various other asscoiated problems in finFET SRAM. Implemented using soft-computational approach, the proposed system exhibits that it offers better energy retention, lower delay, and potential capability to offer higher throughput irrespective of presence of uncertain amount of noise within the component

Cross-Layer Resiliency Modeling and Optimization: A Device to Circuit Approach

The never ending demand for higher performance and lower power consumption pushes the VLSI industry to further scale the technology down. However, further downscaling of technology at nano-scale leads to major challenges. Reduced reliability is one of them, arising from multiple sources e.g. runtime variations, process variation, and transient errors. The objective of this thesis is to tackle unreliability with a cross layer approach from device up to circuit level

Design Space Exploration and Comparative Evaluation of Memory Technologies for Synaptic Crossbar Arrays: Device-Circuit Non-Idealities and System Accuracy

In-memory computing (IMC) utilizing synaptic crossbar arrays is promising for deep neural networks to attain high energy efficiency and integration density. Towards that end, various CMOS and post-CMOS technologies have been explored as promising synaptic device candidates which include SRAM, ReRAM, FeFET, SOT-MRAM, etc. However, each of these technologies has its own pros and cons, which need to be comparatively evaluated in the context of synaptic array designs. For a fair comparison, such an analysis must carefully optimize each technology, specifically for synaptic crossbar design accounting for device and circuit non-idealities in crossbar arrays such as variations, wire resistance, driver/sink resistance, etc. In this work, we perform a comprehensive design space exploration and comparative evaluation of different technologies at 7nm technology node for synaptic crossbar arrays, in the context of IMC robustness and system accuracy. Firstly, we integrate different technologies into a cross-layer simulation flow based on physics-based models of synaptic devices and interconnects. Secondly, we optimize both technology-agnostic design knobs such as input encoding and ON-resistance as well as technology-specific design parameters including ferroelectric thickness in FeFET and MgO thickness in SOT-MRAM. Our optimization methodology accounts for the implications of device- and circuit-level non-idealities on the system-level accuracy for each technology. Finally, based on the optimized designs, we obtain inference results for ResNet-20 on CIFAR-10 dataset and show that FeFET-based crossbar arrays achieve the highest accuracy due to their compactness, low leakage and high ON/OFF current ratio

Skybridge-3D-CMOS: A Fine-Grained Vertical 3D-CMOS Technology Paving New Direction for 3D IC

2D CMOS integrated circuit (IC) technology scaling faces severe challenges that result from device scaling limitations, interconnect bottleneck that dominates power and performance, etc. 3D ICs with die-die and layer-layer stacking using Through Silicon Vias (TSVs) and Monolithic Inter-layer Vias (MIVs) have been explored in recent years to generate circuits with considerable interconnect saving for continuing technology scaling. However, these 3D IC technologies still rely on conventional 2D CMOS’s device, circuit and interconnect mindset showing only incremental benefits while adding new challenges reliability issues, robustness of power delivery network design and short-channel effects as technology node scaling. Skybridge-3D-CMOS (S3DC) is a fine-grained 3D IC fabric that uses vertically-stacked gates and 3D interconnections composed on vertical nanowires to yield orders of magnitude benefits over 2D ICs. This 3D fabric fully uses the vertical dimension instead of relying on a multi-layered 2D mindset. Its core fabric aspects including device, circuit-style, interconnect and heat-extraction components are co-architected considering the major challenges in 3D IC technology. In S3DC, the 3D interconnections provide greater routing capacity in both vertical and horizontal directions compared to conventional 3D ICs, which eliminates the routability issue in conventional 3D IC technology while enabling ultra-high density design and significant benefits over 2D. Also, the improved vertical routing capacity in S3DC is beneficial for achieving robust and high-density power delivery network (PDN) design while conventional 3D IC has design issues in PDN design due to limited routing resource in vertical direction. Additionally, the 3D gate-all-around transistor incorporating with 3D interconnect in S3DC enables significant SRAM design benefits and good tolerance of process variation compared to conventional 3D IC technology as well as 2D CMOS. The transistor-level (TR-L) monolithic 3D IC (M3D) is the state-of-the-art monolithic 3D technology which shows better benefits than other M3D approaches as well as the TSV-based 3D IC approach. The S3DC is evaluated in large-scale benchmark circuits with comparison to TR-L M3D as well as 2D CMOS. Skybridge yields up to 3x lower power against 2D with no routing congestion in benchmark circuits while TR-L M3D only has up-to 22% power saving with severe routing congestions in the design. The PDN design in S3DC show

Ultra Low Power Digital Circuit Design for Wireless Sensor Network Applications

Ny forskning innenfor feltet trådløse sensornettverk åpner for nye og innovative produkter og løsninger. Biomedisinske anvendelser er blant områdene med størst potensial og det investeres i dag betydelige beløp for å bruke denne teknologien for å gjøre medisinsk diagnostikk mer effektiv samtidig som man åpner for fjerndiagnostikk basert på trådløse sensornoder integrert i et ”helsenett”. Målet er å forbedre tjenestekvalitet og redusere kostnader samtidig som brukerne skal oppleve forbedret livskvalitet som følge av økt trygghet og mulighet for å tilbringe mest mulig tid i eget hjem og unngå unødvendige sykehusbesøk og innleggelser. For å gjøre dette til en realitet er man avhengige av sensorelektronikk som bruker minst mulig energi slik at man oppnår tilstrekkelig batterilevetid selv med veldig små batterier. I sin avhandling ” Ultra Low power Digital Circuit Design for Wireless Sensor Network Applications” har PhD-kandidat Farshad Moradi fokusert på nye løsninger innenfor konstruksjon av energigjerrig digital kretselektronikk. Avhandlingen presenterer nye løsninger både innenfor aritmetiske og kombinatoriske kretser, samtidig som den studerer nye statiske minneelementer (SRAM) og alternative minnearkitekturer. Den ser også på utfordringene som oppstår når silisiumteknologien nedskaleres i takt med mikroprosessorutviklingen og foreslår løsninger som bidrar til å gjøre kretsløsninger mer robuste og skalerbare i forhold til denne utviklingen. De viktigste konklusjonene av arbeidet er at man ved å introdusere nye konstruksjonsteknikker både er i stand til å redusere energiforbruket samtidig som robusthet og teknologiskalerbarhet øker. Forskningen har vært utført i samarbeid med Purdue University og vært finansiert av Norges Forskningsråd gjennom FRINATprosjektet ”Micropower Sensor Interface in Nanometer CMOS Technology”

On Improving Robustness of Hardware Security Primitives and Resistance to Reverse Engineering Attacks

The continued growth of information technology (IT) industry and proliferation of interconnected devices has aggravated the problem of ensuring security and necessitated the need for novel, robust solutions. Physically unclonable functions (PUFs) have emerged as promising secure hardware primitives that can utilize the disorder introduced during manufacturing process to generate unique keys. They can be utilized as \textit{lightweight} roots-of-trust for use in authentication and key generation systems. Unlike insecure non-volatile memory (NVM) based key storage systems, PUFs provide an advantage -- no party, including the manufacturer, should be able to replicate the physical disorder and thus, effectively clone the PUF. However, certain practical problems impeded the widespread deployment of PUFs. This dissertation addresses such problems of (i) reliability and (ii) unclonability. Also, obfuscation techniques have proven necessary to protect intellectual property in the presence of an untrusted supply chain and are needed to aid against counterfeiting. This dissertation explores techniques utilizing layout and logic-aware obfuscation. Collectively, we present secure and cost-effective solutions to address crucial hardware security problems

Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions

Digital and analog TFET circuits: Design and benchmark

In this work, we investigate by means of simulations the performance of basic digital, analog, and mixed-signal circuits employing tunnel-FETs (TFETs). The analysis reviews and complements our previous papers on these topics. By considering the same devices for all the analysis, we are able to draw consistent conclusions for a wide variety of circuits. A virtual complementary TFET technology consisting of III-V heterojunction nanowires is considered. Technology Computer Aided Design (TCAD) models are calibrated against the results of advanced full-quantum simulation tools and then used to generate look-up-tables suited for circuit simulations. The virtual complementary TFET technology is benchmarked against predictive technology models (PTM) of complementary silicon FinFETs for the 10 nm node over a wide range of supply voltages (VDD) in the sub-threshold voltage domain considering the same footprint between the vertical TFETs and the lateral FinFETs and the same static power. In spite of the asymmetry between p- and n-type transistors, the results show clear advantages of TFET technology over FinFET for VDDlower than 0.4 V. Moreover, we highlight how differences in the I-V characteristics of FinFETs and TFETs suggest to adapt the circuit topologies used to implement basic digital and analog blocks with respect to the most common CMOS solutions