6,793 research outputs found
Development of a sensor-based approach for local minima recovery in unknown environments
This paper introduces a new methodology for escaping from local minima using an actual-virtual target switching strategy. In particular, this approach proposes suitable steps to detect trap situations and guide the robot away from local minima even when the environment is completely unknown. In this work the navigation system consists of two layers. In the low-level layer, a Nearest Virtual Target (NVT) approach is adapted as a reactive collision avoidance method for mobile robot navigation to achieve collision free motion in cluttered, dense and troublesome scenarios. Where the robot is surrounded by obstacles and a trap situation is likely to occur, the high-level layer becomes responsible to plan a path to pull the robot out of the trap. Finally, the performance of the proposed approach is validated by simulation results
Past, Present, and Future of Simultaneous Localization And Mapping: Towards the Robust-Perception Age
Simultaneous Localization and Mapping (SLAM)consists in the concurrent
construction of a model of the environment (the map), and the estimation of the
state of the robot moving within it. The SLAM community has made astonishing
progress over the last 30 years, enabling large-scale real-world applications,
and witnessing a steady transition of this technology to industry. We survey
the current state of SLAM. We start by presenting what is now the de-facto
standard formulation for SLAM. We then review related work, covering a broad
set of topics including robustness and scalability in long-term mapping, metric
and semantic representations for mapping, theoretical performance guarantees,
active SLAM and exploration, and other new frontiers. This paper simultaneously
serves as a position paper and tutorial to those who are users of SLAM. By
looking at the published research with a critical eye, we delineate open
challenges and new research issues, that still deserve careful scientific
investigation. The paper also contains the authors' take on two questions that
often animate discussions during robotics conferences: Do robots need SLAM? and
Is SLAM solved
Extrinisic Calibration of a Camera-Arm System Through Rotation Identification
Determining extrinsic calibration parameters is a necessity in any robotic
system composed of actuators and cameras. Once a system is outside the lab
environment, parameters must be determined without relying on outside artifacts
such as calibration targets. We propose a method that relies on structured
motion of an observed arm to recover extrinsic calibration parameters. Our
method combines known arm kinematics with observations of conics in the image
plane to calculate maximum-likelihood estimates for calibration extrinsics.
This method is validated in simulation and tested against a real-world model,
yielding results consistent with ruler-based estimates. Our method shows
promise for estimating the pose of a camera relative to an articulated arm's
end effector without requiring tedious measurements or external artifacts.
Index Terms: robotics, hand-eye problem, self-calibration, structure from
motio
An approach for real-time motion planning of an inchworm robot in complex steel bridge environments
© Cambridge University Press 2016. Path planning can be difficult and time consuming for inchworm robots especially when operating in complex 3D environments such as steel bridges. Confined areas may prevent a robot from extensively searching the environment by limiting its mobility. An approach for real-time path planning is presented. This approach first uses the concept of line-of-sight (LoS) to find waypoints from the start pose to the end node. It then plans smooth, collision-free motion for a robot to move between waypoints using a 3D-F2 algorithm. Extensive simulations and experiments are conducted in 2D and 3D scenarios to verify the approach
Look, no Beacons! Optimal All-in-One EchoSLAM
We study the problem of simultaneously reconstructing a polygonal room and a
trajectory of a device equipped with a (nearly) collocated omnidirectional
source and receiver. The device measures arrival times of echoes of pulses
emitted by the source and picked up by the receiver. No prior knowledge about
the device's trajectory is required. Most existing approaches addressing this
problem assume multiple sources or receivers, or they assume that some of these
are static, serving as beacons. Unlike earlier approaches, we take into account
the measurement noise and various constraints on the geometry by formulating
the solution as a minimizer of a cost function similar to \emph{stress} in
multidimensional scaling. We study uniqueness of the reconstruction from
first-order echoes, and we show that in addition to the usual invariance to
rigid motions, new ambiguities arise for important classes of rooms and
trajectories. We support our theoretical developments with a number of
numerical experiments.Comment: 5 pages, 6 figures, submitted to Asilomar Conference on Signals,
Systems, and Computers Websit
Detail Enhancing Denoising of Digitized 3D Models from a Mobile Scanning System
The acquisition process of digitizing a large-scale environment produces an enormous amount of raw geometry data. This data is corrupted by system noise, which leads to 3D surfaces that are not smooth and details that are distorted. Any scanning system has noise associate with the scanning hardware, both digital quantization errors and measurement inaccuracies, but a mobile scanning system has additional system noise introduced by the pose estimation of the hardware during data acquisition. The combined system noise generates data that is not handled well by existing noise reduction and smoothing techniques.
This research is focused on enhancing the 3D models acquired by mobile scanning systems used to digitize large-scale environments. These digitization systems combine a variety of sensors – including laser range scanners, video cameras, and pose estimation hardware – on a mobile platform for the quick acquisition of 3D models of real world environments. The data acquired by such systems are extremely noisy, often with significant details being on the same order of magnitude as the system noise. By utilizing a unique 3D signal analysis tool, a denoising algorithm was developed that identifies regions of detail and enhances their geometry, while removing the effects of noise on the overall model.
The developed algorithm can be useful for a variety of digitized 3D models, not just those involving mobile scanning systems. The challenges faced in this study were the automatic processing needs of the enhancement algorithm, and the need to fill a hole in the area of 3D model analysis in order to reduce the effect of system noise on the 3D models. In this context, our main contributions are the automation and integration of a data enhancement method not well known to the computer vision community, and the development of a novel 3D signal decomposition and analysis tool. The new technologies featured in this document are intuitive extensions of existing methods to new dimensionality and applications. The totality of the research has been applied towards detail enhancing denoising of scanned data from a mobile range scanning system, and results from both synthetic and real models are presented
Historical forest biomass dynamics modelled with Landsat spectral trajectories
Acknowledgements National Forest Inventory data are available online, provided by Ministerio de Agricultura, Alimentación y Medio Ambiente (España). Landsat images are available online, provided by the USGS.Peer reviewedPostprin
- …