2,389 research outputs found
Influence of frictions on gait optimization of a biped robot with an anthropomorphic knee
This paper presents the energy consumption of a biped robot with a new modelled structure of knees which is called rolling knee (RK). The dynamic model, the actuators and the friction coefficients of the gear box are known. The optimal energy consumption can also be calculated. The first part of the paper is to validate the new kinematic knee on a biped robot by comparing the energy consumption during a walking step of the identical biped but with revolute joint knees. The cyclic gait is given by a succession of Single Support Phase (SSP) followed by an impact. The gait trajectories are parameterized by cubic spline functions. The energetic criterion is minimized through optimization while using the simplex algorithm and Lagrange penalty functions to meet the constraints of stability and deflection of the mobile foot. An analysis of the friction coefficients is done by simulation to compare the human characteristics to the robot with RK. The simulation results show an energy consumption reduction through the biped with rolling knee configuration. The influence of friction coefficients shows the energy consumption of biped robot is close to that of the human.ANR-09-SEGI-011-R2A2; French National Research Agenc
Adaptive, fast walking in a biped robot under neuronal control and learning
Human walking is a dynamic, partly self-stabilizing process relying on the interaction of the biomechanical design with its neuronal control. The coordination of this process is a very difficult problem, and it has been suggested that it involves a hierarchy of levels, where the lower ones, e.g., interactions between muscles and the spinal cord, are largely autonomous, and where higher level control (e.g., cortical) arises only pointwise, as needed. This requires an architecture of several nested, sensori–motor loops where the walking process provides feedback signals to the walker's sensory systems, which can be used to coordinate its movements. To complicate the situation, at a maximal walking speed of more than four leg-lengths per second, the cycle period available to coordinate all these loops is rather short. In this study we present a planar biped robot, which uses the design principle of nested loops to combine the self-stabilizing properties of its biomechanical design with several levels of neuronal control. Specifically, we show how to adapt control by including online learning mechanisms based on simulated synaptic plasticity. This robot can walk with a high speed (> 3.0 leg length/s), self-adapting to minor disturbances, and reacting in a robust way to abruptly induced gait changes. At the same time, it can learn walking on different terrains, requiring only few learning experiences. This study shows that the tight coupling of physical with neuronal control, guided by sensory feedback from the walking pattern itself, combined with synaptic learning may be a way forward to better understand and solve coordination problems in other complex motor tasks
Restricted Discrete Invariance and Self-Synchronization For Stable Walking of Bipedal Robots
Models of bipedal locomotion are hybrid, with a continuous component often
generated by a Lagrangian plus actuators, and a discrete component where leg
transfer takes place. The discrete component typically consists of a locally
embedded co-dimension one submanifold in the continuous state space of the
robot, called the switching surface, and a reset map that provides a new
initial condition when a solution of the continuous component intersects the
switching surface. The aim of this paper is to identify a low-dimensional
submanifold of the switching surface, which, when it can be rendered invariant
by the closed-loop dynamics, leads to asymptotically stable periodic gaits. The
paper begins this process by studying the well-known 3D Linear Inverted
Pendulum (LIP) model, where analytical results are much easier to obtain. A key
contribution here is the notion of \textit{self-synchronization}, which refers
to the periods of the pendular motions in the sagittal and frontal planes
tending to a common period. The notion of invariance resulting from the study
of the 3D LIP model is then extended to a 9-DOF 3D biped. A numerical study is
performed to illustrate that asymptotically stable walking may be obtained.Comment: Conferenc
Quasi Optimal Gait of a Biped Robot with a Rolling Knee Kinematic
In this paper, we address the problem of optimization of trajectories for a new class of biped robot. The knees of this biped are similar as the anthropomorphic one and have a rolling contact between the femur and the tibia. The robot has seven mechanical links and six actuators. The walking gait considered is a succession of single support phase (SSP) and impact of the mobile foot with the ground. Cubic uniform spline functions defined on a time interval express the gait for one step. An energy consumption function and a torques quadratic function are used to compare the new robot with anthropomorphic knees to a conventional robot with revolute joint knees. The minimization of the criteria is made with simplex algorithm. The physical constraints concerning the ZMP and the mobile foot behavior are respectively checked to make a step. Simulation results show that the energy consumption of the new biped with rolling knee contact is less than that of the robot with revolute joint knees.ANR R2A
Quasi optimal sagittal gait of a biped robot with a new structure of knee joint
The design of humanoid robots has been a tricky challenge for several years. Due to the kinematic complexity of human joints, their movements are notoriously difficult to be reproduced by a mechanism. The human knees allow movements including rolling and sliding, and therefore the design of new bioinspired knees is of utmost importance for the reproduction of anthropomorphic walking in the sagittal plane. In this article, the kinematic characteristics of knees were analyzed and a mechanical solution for reproducing them is proposed. The geometrical, kinematic and dynamic models are built together with an impact model for a biped robot with the new knee kinematic. The walking gait is studied as a problem of parametric optimization under constraints. The trajectories of walking are approximated by mathematical functions for a gait composed of single support phases with impacts. Energy criteria allow comparing the robot provided with the new rolling knee mechanism and a robot equipped with revolute knee joints. The results of the optimizations show that the rolling knee brings a decrease of the sthenic criterion. The comparisons of torques are also observed to show the difference of energy distribution between the actuators. For the same actuator selection, these results prove that the robot with rolling knees can walk longer than the robot with revolute joint knees.ANR R2A
Natural ZMP trajectories for biped robot reference generation
The control of a biped humanoid is a challenging
task due to the hard-to-stabilize dynamics. Walking reference
trajectory generation is a key problem. Linear Inverted
Pendulum Model (LIPM) and Zero Moment Point (ZMP)
Criterion based approaches in stable walking reference
generation are reported. In these methods, generally, the ZMP
reference during a stepping motion is kept fixed in the middle of
the supporting foot sole. This kind of reference generation lacks
naturalness, in that, the ZMP in the human walk does not stay
fixed, but it moves forward under the supporting foot. This paper
proposes a reference generation algorithm based on the LIPM
and moving support foot ZMP references. The application of
Fourier series approximation simplifies the solution and it
generates a smooth ZMP reference. A simple inverse kinematics
based joint space controller is used for the tests of the developed
reference trajectory through full-dynamics 3D simulation. A 12
DOF biped robot model is used in the simulations. Simulation
studies suggest that the moving ZMP references are more energy
efficient than the ones with fixed ZMP under the supporting foot.
The results are promising for implementations
- …