2,481 research outputs found
Coordinated design of coding and modulation systems
The joint optimization of the coding and modulation systems employed in telemetry systems was investigated. Emphasis was placed on formulating inner and outer coding standards used by the Goddard Spaceflight Center. Convolutional codes were found that are nearly optimum for use with Viterbi decoding in the inner coding of concatenated coding systems. A convolutional code, the unit-memory code, was discovered and is ideal for inner system usage because of its byte-oriented structure. Simulations of sequential decoding on the deep-space channel were carried out to compare directly various convolutional codes that are proposed for use in deep-space systems
An Iteratively Decodable Tensor Product Code with Application to Data Storage
The error pattern correcting code (EPCC) can be constructed to provide a
syndrome decoding table targeting the dominant error events of an inter-symbol
interference channel at the output of the Viterbi detector. For the size of the
syndrome table to be manageable and the list of possible error events to be
reasonable in size, the codeword length of EPCC needs to be short enough.
However, the rate of such a short length code will be too low for hard drive
applications. To accommodate the required large redundancy, it is possible to
record only a highly compressed function of the parity bits of EPCC's tensor
product with a symbol correcting code. In this paper, we show that the proposed
tensor error-pattern correcting code (T-EPCC) is linear time encodable and also
devise a low-complexity soft iterative decoding algorithm for EPCC's tensor
product with q-ary LDPC (T-EPCC-qLDPC). Simulation results show that
T-EPCC-qLDPC achieves almost similar performance to single-level qLDPC with a
1/2 KB sector at 50% reduction in decoding complexity. Moreover, 1 KB
T-EPCC-qLDPC surpasses the performance of 1/2 KB single-level qLDPC at the same
decoder complexity.Comment: Hakim Alhussien, Jaekyun Moon, "An Iteratively Decodable Tensor
Product Code with Application to Data Storage
The Error-Pattern-Correcting Turbo Equalizer
The error-pattern correcting code (EPCC) is incorporated in the design of a
turbo equalizer (TE) with aim to correct dominant error events of the
inter-symbol interference (ISI) channel at the output of its matching Viterbi
detector. By targeting the low Hamming-weight interleaved errors of the outer
convolutional code, which are responsible for low Euclidean-weight errors in
the Viterbi trellis, the turbo equalizer with an error-pattern correcting code
(TE-EPCC) exhibits a much lower bit-error rate (BER) floor compared to the
conventional non-precoded TE, especially for high rate applications. A
maximum-likelihood upper bound is developed on the BER floor of the TE-EPCC for
a generalized two-tap ISI channel, in order to study TE-EPCC's signal-to-noise
ratio (SNR) gain for various channel conditions and design parameters. In
addition, the SNR gain of the TE-EPCC relative to an existing precoded TE is
compared to demonstrate the present TE's superiority for short interleaver
lengths and high coding rates.Comment: This work has been submitted to the special issue of the IEEE
Transactions on Information Theory titled: "Facets of Coding Theory: from
Algorithms to Networks". This work was supported in part by the NSF
Theoretical Foundation Grant 0728676
Turbo Decoding and Detection for Wireless Applications
A historical perspective of turbo coding and turbo transceivers inspired by the generic turbo principles is provided, as it evolved from Shannon’s visionary predictions. More specifically, we commence by discussing the turbo principles, which have been shown to be capable of performing close to Shannon’s capacity limit. We continue by reviewing the classic maximum a posteriori probability decoder. These discussions are followed by studying the effect of a range of system parameters in a systematic fashion, in order to gauge their performance ramifications. In the second part of this treatise, we focus our attention on the family of iterative receivers designed for wireless communication systems, which were partly inspired by the invention of turbo codes. More specifically, the family of iteratively detected joint coding and modulation schemes, turbo equalization, concatenated spacetime and channel coding arrangements, as well as multi-user detection and three-stage multimedia systems are highlighted
- …