Channel acquisition and routing system for real-time cognitive radio sensor networks

The need for efficient spectrum utilization and routing has ignited interest in the Cognitive Radio Sensor Network (CRSN) paradigm among researchers. CRSN ensures efficient spectrum utilization for wireless sensor network. However, the main challenge faced by CRSN users have to deal with is the issue of service quality in terms of interference when using channels and degradation in multi-hop communication. This thesis proposes to overcome the interference due to contention and routing issues through the design of an efficient Channel Acquisition and Reliable routing System (CARS). CARS is designed to reduce carrier sense multiple access contention and enhance routing in CRSNs. CARS comprises of Lightweight Distributed Geographical (LDG), and Reliable Opportunists Routing (ROR) modules. LDG is a medium access control centric; cross-layer designed protocol to acquire a common control channel for signalling to determine the data channel. ROR is a network-centric cross-layer designed protocol to decide on a path for routing data packets. The result shows that LDG significantly reduces the overhead of media access contention and energy cost by at an average of 70% and 80% respectively compared to other approaches that use common control channel acquisition like Efficient Recovery Control Channel (ERCC) protocol. In addition, LDG achieves a 16.3% boost in the time to rendezvous on the control channel above ERCC and a 36.9% boost above Coordinated Channel Hopping (CCH) protocol. On the other hand, the virtual clustering framework inspired by ROR has further improved network performance. The proposed ROR significantly increases packet received at the sink node by an average of over 20%, reduces end-to-end latency by an average of 37% and minimizes energy consumption by an average of 22% as compared to Spectrum-aware Clustering for Efficient Multimedia routing (SCEEM) protocol. In brief, the design of CARS which takes the intrinsic characteristics of CRSNs into consideration helps to significantly reduce the energy needed for securing a control channel and to guarantee that end-to-end, real-time conditions are preserved in terms of latency and media content. Thus, LDG and ROR are highly recommended for real-time data transmission such as multimedia data transfer in CRSN

Identifying Design Requirements for Wireless Routing Link Metrics

In this paper, we identify and analyze the requirements to design a new routing link metric for wireless multihop networks. Considering these requirements, when a link metric is proposed, then both the design and implementation of the link metric with a routing protocol become easy. Secondly, the underlying network issues can easily be tackled. Thirdly, an appreciable performance of the network is guaranteed. Along with the existing implementation of three link metrics Expected Transmission Count (ETX), Minimum Delay (MD), and Minimum Loss (ML), we implement inverse ETX; invETX with Optimized Link State Routing (OLSR) using NS-2.34. The simulation results show that how the computational burden of a metric degrades the performance of the respective protocol and how a metric has to trade-off between different performance parameters

Medium access control, error control and routing in underwater acoustic networks: a discussion on protocol design and implementation

The journey of underwater communication which began from Leonardo’s era took four and a half centuries to find practical applications for military purposes during World War II. However, over the last three decades, underwater acoustic communications witnessed a massive development due to the advancements in the design of underwater communicating peripherals and their supporting protocols. Successively, doors are opened for a wide range of applications to employ in the underwater environment, such as oceanography, pollution monitoring, offshore exploration, disaster prevention, navigation assistance, monitoring, coastal patrol and surveillance. Different applications may have different characteristics and hence, may require different network architectures. For instance, routing protocols designed for unpartitioned multi-hop networks are not suitable for Delay-Tolerant Networks. Furthermore, single-hop networks do not need routing protocols at all. Therefore, before developing a protocol one must study the network architecture properly and design it accordingly. There are several other factors which should also be considered with the network architecture while designing an efficient protocol for underwater networks, such as long propagation delay, limited bandwidth, limited battery power, high bit error rate of the channel and several other adverse properties of the channel, such as, multi-path, fading and refractive behaviors. Moreover, the environment also has an impact on the performance of the protocols designed for underwater networks. Even temperature changes in a single day have an impact on the performance of the protocols. A good protocol designed for any network should consider some or all of these characteristics to achieve better performance. In this thesis, we first discuss the impact of the environment on the performance of MAC and routing protocols. From our investigation, we discover that even temperature changes within a day may affect the sound speed profile and hence, the channel changes and the protocol performance vary. After that we discuss several protocols which are specifically designed for underwater acoustic networks to serve different purposes and for different network architectures. Underwater Selective Repeat (USR) is an error control protocol designed to assure reliable data transmission in the MAC layer. One may suspect that employing an error control technique over a channel which already suffers from long propagation delays is a burden. However, USR utilizes long propagation by transmitting multiple packets in a single RTT using an interlacing technique. After USR, a routing protocol for surveillance networks is discussed where some sensors are laid down at the bottom of the sea and some sinks are placed outside the area. If a sensor detects an asset within its detection range, it announces the presence of intruders by transmitting packets to the sinks. It may happen that the discovered asset is an enemy ship or an enemy submarine which creates noise to jam the network. Therefore, in surveillance networks, it is necessary that the protocols have jamming resistance capabilities. Moreover, since the network supports multiple sinks with similar anycast address, we propose a Jamming Resistance multi-path Multi-Sink Routing Protocol (MSRP) using a source routing technique. However, the problem of source routing is that it suffers from large overhead (every packet includes the whole path information) with respect to other routing techniques, and also suffers from the unidirectional link problem. Therefore, another routing protocol based on a distance vector technique, called Multi-path Routing with Limited Cross-Path Interference (L-CROP) protocol is proposed, which employs a neighbor-aware multi-path discovery algorithm to support low interference multiple paths between each source-destination pair. Following that, another routing protocol is discussed for next generation coastal patrol and surveillance network, called Underwater Delay-Tolerant Network (UDTN) routing where some AUVs carry out the patrolling work of a given area and report to a shore based control-center. Since the area to be patrolled is large, AUVs experience intermittent connectivity. In our proposed protocol, two nodes that understand to be in contact with each other calculate and divide their contact duration equally so that every node gets a fair share of the contact duration to exchange data. Moreover, a probabilistic spray technique is employed to restrict the number of packet transmissions and for error correction a modified version of USR is employed. In the appendix, we discuss a framework which was designed by our research group to realize underwater communication through simulation which is used in most of the simulations in this thesis, called DESERT Underwater (short for DEsign, Simulate, Emulate and Realize Test-beds for Underwater network protocols). It is an underwater extension of the NS-Miracle simulator to support the design and implementation of underwater network protocols. Its creation assists the researchers in to utilizing the same codes designed for the simulator to employ in actual hardware devices and test in the real underwater scenario

Design and analysis of a beacon-less routing protocol for large volume content dissemination in vehicular ad hoc networks

Largevolumecontentdisseminationispursuedbythegrowingnumberofhighquality applications for Vehicular Ad hoc NETworks(VANETs), e.g., the live road surveillance service and the video-based overtaking assistant service. For the highly dynamical vehicular network topology, beacon-less routing protocols have been proven to be efficient in achieving a balance between the system performance and the control overhead. However, to the authors’ best knowledge, the routing design for large volume content has not been well considered in the previous work, which will introduce new challenges, e.g., the enhanced connectivity requirement for a radio link. In this paper, a link Lifetime-aware Beacon-less Routing Protocol (LBRP) is designed for large volume content delivery in VANETs. Each vehicle makes the forwarding decision based on the message header information and its current state, including the speed and position information. A semi-Markov process analytical model is proposed to evaluate the expected delay in constructing one routing path for LBRP. Simulations show that the proposed LBRP scheme outperforms the traditional dissemination protocols in providing a low end-to-end delay. The analytical model is shown to exhibit a good match on the delay estimation with Monte Carlo simulations, as well