708 research outputs found
Mapping DSP algorithms to a reconfigurable architecture Adaptive Wireless Networking (AWGN)
This report will discuss the Adaptive Wireless Networking project. The vision of the Adaptive Wireless Networking project will be given. The strategy of the project will be the implementation of multiple communication systems in dynamically reconfigurable heterogeneous hardware. An overview of a wireless LAN communication system, namely HiperLAN/2, and a Bluetooth communication system will be given. Possible implementations of these systems in a dynamically reconfigurable architecture are discussed. Suggestions for future activities in the Adaptive Wireless Networking project are also given
Applications of medical wireless LAN systems (MedLAN)
This is a post-peer-review, pre-copyedit version of an article published in Journal of Medical Marketing. The definitive publisher-authenticated version "Konstantinos A. Banitsas, R.S.H. Istepanian, Sapal Tachakra. Applications of medical Wireless LAN systems (MedLAN). Journal of Medical Marketing, Volume 2, Number 2, 1 January 2002 , pp. 136-142(7)" is available online at: http://www.ingentaconnect.com/content/pal/jomm/2002/00000002/00000002/art00008.In this paper the Wireless LAN (WLAN) networking principals are presented along with some of the implementation scenarios dedicated for Accidents and Emergencies wards. Preliminary simulation results of the MedLAN concept are also presented together with ongoing and future work in this area
General Model for Infrastructure Multi-channel Wireless LANs
In this paper we develop an integrated model for request mechanism and data
transmission in multi-channel wireless local area networks. We calculated the
performance parameters for single and multi-channel wireless networks when the
channel is noisy. The proposed model is general it can be applied to different
wireless networks such as IEEE802.11x, IEEE802.16, CDMA operated networks and
Hiperlan\2.Comment: 11 Pages, IJCN
A Real-Time GPP Software-Defined Radio Testbed for the Physical Layer of Wireless Standards
We present our contribution to the general-purpose-processor-(GPP)-based radio. We describe a baseband software-defined radio testbed for the physical layer of wireless LAN standards. All physical layer functions have been successfully mapped on a Pentium 4 processor that performs these functions in real time. The testbed consists of a transmitter PC with a DAC board and a receiver PC with an ADC board. In our project, we have implemented two different types of standards on this testbed, a continuous-phase-modulation-based standard, Bluetooth, and an OFDM-based standard, HiperLAN/2. However, our testbed can easily be extended to other standards, because the only limitation in our testbed is the maximal channel bandwidth of 20 MHz and of course the processing capabilities of the used PC. The transmitter functions require at most 714 M cycles per second and the receiver functions need 1225 M cycles per second on a Pentium 4 processor. In addition, baseband experiments have been carried out successfully
Frequency Offset Correction in a Software Defined HiperLAN/2 Demodulator using Preamble Section A
In our Software Defined Radio project we perform a feasibility study of a software defined radio for two communication standards: HiperLAN/2 and Bluetooth. In this paper the Matlab/Simulink implementation of the HiperLAN/2 demodulator for the demonstrator of the project is discussed, with special attention for the frequency offset corrector. This type of correction is necessary to prevent large bit error rates that are caused by inter-subcarrier interference. The method that is proposed in this paper uses preamble section A to estimate the frequency offset. Simulation results for an AWGN channel show that the method is capable of correcting frequency offsets up to the boundary defined in the standard [1]. It was observed that frequency offset correction using only preamble section A is sensitive to Āæfor exampleĀæ synchronization errors in case real-life analog front-end signals are used
Functional Analysis of a SDR Based Bluetooth/HiperLAN Terminal Demonstrator
|In our Software Defined Radio (SDR) project we aim at combining two different types of standards, Bluetooth and HiperLAN/2 on one common hardware platform. HiperLAN/2 is a high-speed Wireless LAN (WLAN) standard, whereas Bluetooth is a low-cost and low-speed Personal Area Network (PAN) standard. An SDR system is a Ā°exible radio system that is re-programmable and reconfigurable by software in order to cope with its multi-service, multi-standard and multi-band environment. Goal of our project is to generate knowledge about designing the front end of an SDR system where especially an approach from both analog and digital perspective is essential.To what extent can we use the HiperLAN/2 receiver hardware for our Bluetooth receiver? In this paper we present a functional architecture that brings the architectural descriptions of both standards to an equal level. This SDR functional architecture is used in the sequel of the project for a number of purposes, of which we mention 1. Definition of reference points (for requirements definition purposes). 2. Definition of interfaces (potential alignment with SDR Forum). 3. Delimitation of our demonstrator (what is it that is going to be built). 4. Identification of inter-standard functional integration challenges
- ā¦