Pilot Beam Sequence Design for Channel Estimation in Millimeter-Wave MIMO Systems: A POMDP Framework

In this paper, adaptive pilot beam sequence design for channel estimation in large millimeter-wave (mmWave) MIMO systems is considered. By exploiting the sparsity of mmWave MIMO channels with the virtual channel representation and imposing a Markovian random walk assumption on the physical movement of the line-of-sight (LOS) and reflection clusters, it is shown that the sparse channel estimation problem in large mmWave MIMO systems reduces to a sequential detection problem that finds the locations and values of the non-zero-valued bins in a two-dimensional rectangular grid, and the optimal adaptive pilot design problem can be cast into the framework of a partially observable Markov decision process (POMDP). Under the POMDP framework, an optimal adaptive pilot beam sequence design method is obtained to maximize the accumulated transmission data rate for a given period of time. Numerical results are provided to validate our pilot signal design method and they show that the proposed method yields good performance.Comment: 6 pages, 6 figures, submitted to IEEE ICC 201

Design and Implementation of Belief Propagation Symbol Detectors for Wireless Intersymbol Interference Channels

In modern wireless communication systems, intersymbol interference (ISI) introduced by frequency selective fading is one of the major impairments to reliable data communication. In ISI channels, the receiver observes the superposition of multiple delayed reflections of the transmitted signal, which will result errors in the decision device. As the data rate increases, the effect of ISI becomes severe. To combat ISI, equalization is usually required for symbol detectors. The optimal maximum-likelihood sequence estimation (MLSE) based on the Viterbi algorithm (VA) may be used to estimate the transmitted sequence in the presence of the ISI. However, the computational complexity of the MLSE increases exponentially with the length of the channel impulse response (CIR). Even in channels which do not exhibit significant time dispersion, the length of the CIR will effectively increase as the sampling rate goes higher. Thus the optimal MLSE is impractical to implement in the majority of practical wireless applications. This dissertation is devoted to exploring practically implementable symbol detectors with near-optimal performance in wireless ISI channels. Particularly, we focus on the design and implementation of an iterative detector based on the belief propagation (BP) algorithm. The advantage of the BP detector is that its complexity is solely dependent on the number of nonzero coefficients in the CIR, instead of the length of the CIR. We also extend the work of BP detector design for various wireless applications. Firstly, we present a partial response BP (PRBP) symbol detector with near-optimal performance for channels which have long spanning durations but sparse multipath structure. We implement the architecture by cascading an adaptive linear equalizer (LE) with a BP detector. The channel is first partially equalized by the LE to a target impulse response (TIR) with only a few nonzero coefficients remaining. The residual ISI is then canceled by a more sophisticated BP detector. With the cascaded LE-BP structure, the symbol detector is capable to achieve a near-optimal error rate performance with acceptable implementation complexity. Moreover, we present a pipeline high-throughput implementation of the detector for channel length 30 with quadrature phase-shift keying (QPSK) modulation. The detector can achieve a maximum throughput of 206 Mb/s with an estimated core area of 3.162 mm^{2} using 90-nm technology node. At a target frequency of 515 MHz, the dynamic power is about 1.096 W. Secondly, we investigate the performance of aforementioned PRBP detector under a more generic 3G channel rather than the sparse channel. Another suboptimal partial response maximum-likelihood (PRML) detector is considered for comparison. Similar to the PRBP detector, the PRML detector also employs a hybrid two-stage scheme, in order to allow a tradeoff between performance and complexity. In simulations, we consider a slow fading environment and use the ITU-R 3G channel models. From the numerical results, it is shown that in frequency-selective fading wireless channels, the PRBP detector provides superior performance over both the traditional minimum mean squared error linear equalizer (MMSE-LE) and the PRML detector. Due to the effect of colored noise, the PRML detector in fading wireless channels is not as effective as it is in magnetic recording applications. Thirdly, we extend our work to accommodate the application of Advanced Television Systems Committee (ATSC) digital television (DTV) systems. In order to reduce error propagation caused by the traditional decision feedback equalizer (DFE) in DTV receiver, we present an adaptive decision feedback sparsening filter BP (DFSF-BP) detector, which is another form of PRBP detector. Different from the aforementioned LE-BP structure, in the DFSF-BP scheme, the BP detector is followed by a nonlinear filter called DFSF as the partial response equalizer. In the first stage, the DFSF employs a modified feedback filter which leaves the strongest post-cursor ISI taps uncorrected. As a result, a long ISI channel is equalized to a sparse channel having only a small number of nonzero taps. In the second stage, the BP detector is applied to mitigate the residual ISI. Since the channel is typically time-varying and suffers from Doppler fading, the DFSF is adapted using the least mean square (LMS) algorithm, such that the amplitude and the locations of the nonzero taps of the equalized sparse channel appear to be fixed. As such, the channel appears to be static during the second stage of equalization which consists of the BP detector. Simulation results demonstrate that the proposed scheme outperforms the traditional DFE in symbol error rate, under both static channels and dynamic ATSC channels. Finally, we study the symbol detector design for cooperative communications, which have attracted a lot of attention recently for its ability to exploit increased spatial diversity available at distributed antennas on other nodes. A system framework employing non-orthogonal amplify-and-forward half-duplex relays through ISI channels is developed. Based on the system model, we first design and implement an optimal maximum-likelihood detector based on the Viterbi algorithm. As the relay period increases, the effective CIR between the source and the destination becomes long and sparse, which makes the optimal detector impractical to implement. In order to achieve a balance between the computational complexity and performance, several sub-optimal detectors are proposed. We first present a multitrellis Viterbi algorithm (MVA) based detector which decomposes the original trellis into multiple parallel irregular sub-trellises by investigating the dependencies between the received symbols. Although MVA provides near-optimal performance, it is not straightforward to decompose the trellis for arbitrary ISI channels. Next, the decision feedback sequence estimation (DFSE) based detector and BP-based detector are proposed for cooperative ISI channels. Traditionally these two detectors are used with fixed, static channels. In our model, however, the effective channel is periodically time-varying, even when the component channels themselves are static. Consequently, we modify these two detector to account for cooperative ISI channels. Through simulations in frequency selective fading channels, we demonstrate the uncoded performance of the DFSE detector and the BP detector when compared to the optimal MLSE detector. In addition to quantifying the performance of these detectors, we also include an analysis of the implementation complexity as well as a discussion on complexity/performance tradeoffs

Bayesian compressive sensing framework for spectrum reconstruction in Rayleigh fading channels

Compressive sensing (CS) is a novel digital signal processing technique that has found great interest in many applications including communication theory and wireless communications. In wireless communications, CS is particularly suitable for its application in the area of spectrum sensing for cognitive radios, where the complete spectrum under observation, with many spectral holes, can be modeled as a sparse wide-band signal in the frequency domain. Considering the initial works performed to exploit the benefits of Bayesian CS in spectrum sensing, the fading characteristic of wireless communications has not been considered yet to a great extent, although it is an inherent feature for all sorts of wireless communications and it must be considered for the design of any practically viable wireless system. In this paper, we extend the Bayesian CS framework for the recovery of a sparse signal, whose nonzero coefficients follow a Rayleigh distribution. It is then demonstrated via simulations that mean square error significantly improves when appropriate prior distribution is used for the faded signal coefficients and thus, in turns, the spectrum reconstruction improves. Different parameters of the system model, e.g., sparsity level and number of measurements, are then varied to show the consistency of the results for different cases

Sub-graph based joint sparse graph for sparse code multiple access systems

Sparse code multiple access (SCMA) is a promising air interface candidate technique for next generation mobile networks, especially for massive machine type communications (mMTC). In this paper, we design a LDPC coded SCMA detector by combining the sparse graphs of LDPC and SCMA into one joint sparse graph (JSG). In our proposed scheme, SCMA sparse graph (SSG) defined by small size indicator matrix is utilized to construct the JSG, which is termed as sub-graph based joint sparse graph of SCMA (SG-JSG-SCMA). In this paper, we first study the binary-LDPC (B-LDPC) coded SGJSG- SCMA system. To combine the SCMA variable node (SVN) and LDPC variable node (LVN) into one joint variable node (JVN), a non-binary LDPC (NB-LDPC) coded SG-JSG-SCMA is also proposed. Furthermore, to reduce the complexity of NBLDPC coded SG-JSG-SCMA, a joint trellis representation (JTR) is introduced to represent the search space of NB-LDPC coded SG-JSG-SCMA. Based on JTR, a low complexity joint trellis based detection and decoding (JTDD) algorithm is proposed to reduce the computational complexity of NB-LDPC coded SGJSG- SCMA system. According to the simulation results, SG-JSGSCMA brings significant performance improvement compare to the conventional receiver using the disjoint approach, and it can also outperform a Turbo-structured receiver with comparable complexity. Moreover, the joint approach also has advantages in terms of processing latency compare to the Turbo approaches

An Iteratively Decodable Tensor Product Code with Application to Data Storage

The error pattern correcting code (EPCC) can be constructed to provide a syndrome decoding table targeting the dominant error events of an inter-symbol interference channel at the output of the Viterbi detector. For the size of the syndrome table to be manageable and the list of possible error events to be reasonable in size, the codeword length of EPCC needs to be short enough. However, the rate of such a short length code will be too low for hard drive applications. To accommodate the required large redundancy, it is possible to record only a highly compressed function of the parity bits of EPCC's tensor product with a symbol correcting code. In this paper, we show that the proposed tensor error-pattern correcting code (T-EPCC) is linear time encodable and also devise a low-complexity soft iterative decoding algorithm for EPCC's tensor product with q-ary LDPC (T-EPCC-qLDPC). Simulation results show that T-EPCC-qLDPC achieves almost similar performance to single-level qLDPC with a 1/2 KB sector at 50% reduction in decoding complexity. Moreover, 1 KB T-EPCC-qLDPC surpasses the performance of 1/2 KB single-level qLDPC at the same decoder complexity.Comment: Hakim Alhussien, Jaekyun Moon, "An Iteratively Decodable Tensor Product Code with Application to Data Storage