Scalable energy-efficient routing in mobile Ad hoc network

The quick deployment without any existing infrastructure makes mobile ad hoc networks (MANET) a striking choice for dynamic situations such as military and rescue operations, disaster recovery, and so on and so forth. However, routing remains one of the major issues in MANET due to the highly dynamic and distributed environment. Energy consumption is also a significant issue in ad hoc networks since the nodes are battery powered. This report discusses some major dominating set based approaches to perform energy efficient routing in mobile ad hoc networks. It also presents the performance results for each of these mentioned approaches in terms of throughput, average end to end delay and the life time in terms of the first node failure. Based on the simulation results, I identified the key issues in these protocols regarding network life time. In this report, I propose and discuss a new approach “Dynamic Dominating Set Generation Algorithm” (DDSG) to optimize the network life time. This algorithm dynamically selects dominating nodes during the process of routing and thus creates a smaller dominating set. DDSG algorithm thereby eliminates the energy consumption from the non-used dominating nodes. In order to further increase the network life time, the algorithm takes into consideration the threshold settings which helps to distribute the process of routing within the network. This helps to eliminate a single dominating node from getting drained out by continuous transmission and reception of packets. In this report, the detailed algorithmic design and performance results through simulation is discussed

A New and Efficient Hierarchy-Based Anycast Routing Protocol for Wireless Sensor Networks

[[abstract]]This paper presents a Bidirectional Hierarchy-based Any cast Routing (BHAR) protocol for collecting data over multi-hop wireless sensor networks (WSNs). The BHAR protocol improves on existing HAR mechanisms to speed up the process of constructing hierarchical trees and repairing routes, and as a result to prolong network lifetime. Different from HAR, BHAR allows sinks and sources to initialize the construction of a hierarchical tree. By knowing only its own parent and neighbor nodes, each node can join a tree, exchange/refresh its routing table, and perform route repair without geographical information or being controlled remotely. Simulation results show that our BHAR performs apparently better than traditional HAR on network construction and route repair.[[conferencetype]]國際[[conferencedate]]20100906~20100909[[iscallforpapers]]Y[[conferencelocation]]Taipei, Taiwa

Data gathering approach in dense sensor networks

Sensor/actuator networks promised to extend automated monitoring and control into industrial processes. Avionic system is one of the prominent technologies that can highly gain from dense sensor/actuator deployments. An aircraft with smart sensing skin would fulfill the vision of affordability and environmental friendliness properties by reducing the fuel consumption. Achieving these properties is possible by providing an approximate representation of the air flow across the body of the aircraft and suppressing the detected aerodynamic drags. To the best of our knowledge, getting an accurate representation of the physical entity is one of the most significant challenges that still exists with dense sensor/actuator network. This paper offers an efficient way to acquire sensor readings from very large sensor/actuator network that are located in a small area (dense network). It presents LIA algorithm, a Linear Interpolation Algorithm that provides two important contributions. First, it demonstrates the effectiveness of employing a transformation matrix to mimic the environmental behavior. Second, it renders a smart solution for updating the previously defined matrix through a procedure called learning phase. Simulation results reveal that the average relative error in LIA algorithm can be reduced by as much as 60% by exploiting transformation matrix

CENTRALIZED SECURITY PROTOCOL FOR WIRELESS SENSOR NETWORKS

Wireless Sensor Networks (WSN) is an exciting new technology with applications in military, industry, and healthcare. These applications manage sensitive information in potentially hostile environments. Security is a necessity, but building a WSN protocol is difficult. Nodes are energy and memory constrained devices intended to last months. Attackers are physically able to compromise nodes and attack the network from within. The solution is Centralized Secure Low Energy Adaptive Clustering Hierarchy (CSLEACH). CSLEACH provides security, energy efficiency, and memory efficiency. CSLEACH takes a centralized approach by leveraging the gateways resources to extend the life of a network as well as provide trust management. Using a custom event based simulator, I am able to show CSLEACH\u27s trust protocol is more energy efficient and requires less memory per node than Trust-based LEACH (TLEACH). In terms of security, CSLEACH is able to protect against a wide range of attacks from spoofed messages to compromised node attacks and it provides confidentiality, authentication, integrity and freshness

Fuzzy Clustering Based Routing in Wireless Body Area Networks to Increase the Life of Sensor Nodes

Body area networks is one of the types of wireless area networks which has been created to optimize utilizing hospital resources and for earlier diagnosis of medical symptoms, and ultimately to reduce the cost of medical care. This network like most of the wireless networks is without infrastructure and the embedded sensor nodes in the body have limited energy. Hence, the early power completion of the wireless nodes based on the transmission of messages in the network can disrupt the entire network. In this study, a fuzzy clustering based routing is presented to overcome the mention challenge. In this method, the sensor nodes are allocated to the nearest cluster, based on their distance from the cluster head node, and exchange information with the cluster-head at the near distances, and the cluster-head node, due to its high initial energy, can transmit data to the remote server. In this study, due to the movement of the person and the position shift in the sensor nodes and the distances between the cluster-head nodes, sensor nodes belonging to the clusters are also updated and placed in their proper cluster and the transmission of sensory messages was done with its nearest cluster- head node. Simulation results show that the proposed method can be better than other existing methods in and equal condition

A priority-based energy efficient multi-hop routing protocol with congestion control for wireless body area network

Wireless Body Area Networks (WBANs) are advanced and integrated monitoring networks for healthcare applications. In these networks, different types of Biomedical Sensor Nodes (BSNs) are used to monitor physiological parameters of the human body. The BSNs have limited resources such as energy, memory and computation power. These limited resources make the network challenging especially in terms of energy consumption. Efficient routing schemes are required to save the energy during communication processes. Additionally, the BSNs generate sensitive and non-sensitive data packets, which need to be routed according to their priority. In order to address these problems, a priority-based Energy Efficient Multihop Routing protocol with congestion control (3EMR) for wireless body area network was developed that comprises of three different schemes. First, an Optimal Next-hop Selection (ONS) scheme was developed based on the cost function of routing parameters to dynamically select best next-hop for forwarding data packets. Second, a Priority Based Routing (PBR) scheme was developed to forward data packets according to data priority, which is based on sensitivity of the data with regards to patience’s life. Third, a Congestion Avoidance and Mitigation (CAM) scheme was developed to save energy consumption and packet loss due to congestion by considering packet flow adjustment and congestion zone avoidance based strategy. It improvement is benchmarked against related solutions, and they are Healthcare-aware Optimized Congestion Avoidance (HOCA), Differentiated Rate control for Congestion (DRC), Priority based Cross Layer Routing (PCLR), Even Energy-consumption and Backside Routing (EEBR), and Energy Efficient Routing (EER) scheme. The simulation results demonstrated that the 3EMR scheme achieved significant improvement in terms of increased network lifetime by 31.4%, increased throughput by 33.2%, reduced packet loss 30.9%, increased packet delivery ratio by 21.1% and reduced energy consumption 26.8%. Thus, the proposed routing scheme has proven to be an energy efficient solution for data communication in wireless body area networks