Voliro: An Omnidirectional Hexacopter With Tiltable Rotors

Extending the maneuverability of unmanned areal vehicles promises to yield a considerable increase in the areas in which these systems can be used. Some such applications are the performance of more complicated inspection tasks and the generation of complex uninterrupted movements of an attached camera. In this paper we address this challenge by presenting Voliro, a novel aerial platform that combines the advantages of existing multi-rotor systems with the agility of omnidirectionally controllable platforms. We propose the use of a hexacopter with tiltable rotors allowing the system to decouple the control of position and orientation. The contributions of this work involve the mechanical design as well as a controller with the corresponding allocation scheme. This work also discusses the design challenges involved when turning the concept of a hexacopter with tiltable rotors into an actual prototype. The agility of the system is demonstrated and evaluated in real- world experiments.Comment: Submitted to Robotics and Automation Magazin

Towards Efficient Full Pose Omnidirectionality with Overactuated MAVs

Omnidirectional MAVs are a growing field, with demonstrated advantages for aerial interaction and uninhibited observation. While systems with complete pose omnidirectionality and high hover efficiency have been developed independently, a robust system that combines the two has not been demonstrated to date. This paper presents VoliroX: a novel omnidirectional vehicle that can exert a wrench in any orientation while maintaining efficient flight configurations. The system design is presented, and a 6 DOF geometric control that is robust to singularities. Flight experiments further demonstrate and verify its capabilities.Comment: 10 pages, 6 figures, ISER 2018 conference submissio

분산된 로터로 구동되는 비행 스켈레톤 시스템의 디자인 상태추정 및 제어

학위논문(박사)--서울대학교 대학원 :공과대학 기계항공공학부,2020. 2. 이동준.In this thesis, we present key theoretical components for realizing flying aerial skeleton system called LASDRA (large-size aerial skeleton with distributed rotor actuation). Aerial skeletons are articulated aerial robots actuated by distributed rotors including both ground connected type and flying type. These systems have recently attracted interest and are being actively researched in several research groups, with the expectation of applying those for aerial manipulation in distant/narrow places, or for the performance with entertaining purpose such as drone shows. Among the aerial skeleton systems, LASDRA system, proposed by our group has some significant advantages over the other skeleton systems that it is capable of free SE(3) motion by omni-directional wrench generation of each link, and also the system can be operated with wide range of configuration because of the 3DOF (degrees of freedom) inter-link rotation enabled by cable connection among the link modules. To realize this LASDRA system, following three components are crucial: 1) a link module that can produce omni-directional force and torque and enough feasible wrench space; 2) pose and posture estimation algorithm for an articulated system with high degrees of freedom; and 3) a motion generation framework that can provide seemingly natural motion while being able to generate desired motion (e.g., linear and angular velocity) for the entire body. The main contributions of this thesis is theoretically developing these three components, and verifying these through outdoor flight experiment with a real LASDRA system. First of all, a link module for the LASDRA system is designed with proposed constrained optimization problem, maximizing the guaranteed feasible force and torque for any direction while also incorporating some constraints (e.g., avoiding inter-rotor air-flow interference) to directly obtain feasible solution. Also, an issue of ESC-induced (electronic speed control) singularity is first introduced in the literature which is inevitably caused by bi-directional thrust generation with sensorless actuators, and handled with a novel control allocation called selective mapping. Then for the state estimation of the entire LASDRA system, constrained Kalman filter based estimation algorithm is proposed that can provide estimation result satisfying kinematic constraint of the system, also along with a semi-distributed version of the algorithm to endow with system scalability. Lastly, CPG-based motion generation framework is presented that can generate natural biomimetic motion, and by exploiting the inverse CPG model obtained with machine learning method, it becomes possible to generate certain desired motion while still making CPG generated natural motion.본 논문에서는 비행 스켈레톤 시스템 LASDRA (large-size aerial skeleton with distributed rotor actuation) 의 구현을 위해 요구되는 핵심 기법들을 제안하며, 이를 실제 LASDRA 시스템의 실외 비행을 통해 검증한다. 제안된 기법은 1) 전방향으로 힘과 토크를 낼 수 있고 충분한 가용 렌치공간을 가진 링크 모듈, 2) 높은 자유도의 다관절구조 시스템을 위한 위치 및 자세 추정 알고리즘, 3) 자연스러운 움직임을 내는 동시에 전체 시스템이 속도, 각속도 등 원하는 움직임을 내도록 할 수 있는 모션 생성 프레임워크로 구성된다. 본 논문에서는 우선 링크 모듈의 디자인을 위해 전방향으로 보장되는 힘과 토크의 크기를 최대화하는 구속 최적화를 사용하고, 실제 적용가능한 해를 얻기 위해 몇가지 구속조건(로터 간 공기 흐름 간섭의 회피 등)을 고려한다. 또한 센서가 없는 액츄에이터로 양방향 추력을 내는 것에서 야기되는 ESC 유발 특이점 (ESC-induced singularity) 이라는 문제를 처음으로 소개하고, 이를 해결하기 위해 선택적 맵핑 (selective mapping) 이라는 기법을 제시한다. 전체 LASDRA 시스템의 상태추정을 위해 시스템의 기구학적 구속조건을 만족하는 결과를 얻을 수 있도록 구속 칼만 필터 기반의 상태추정 기법을 제시하고, 시스템 확장성을 고려하여 반 분산 (semi-distributed) 개념의 알고리즘을 함께 제시한다. 마지막으로 본 논문에서는 자연스러운 움직임의 생성을 위하여 CPG 기반의 모션 생성 프레임워크를 제안하며, 기계 학습 방법을 통해 CPG 역연산 모델을 얻음으로써 전체 시스템이 원하는 움직임을 낼 수 있도록 한다.1 Introduction 1 1.1 Motivation and Background 1 1.2 Research Problems and Approach 3 1.3 Preview of Contributions 5 2 Omni-Directional Aerial Robot 7 2.1 Introduction 7 2.2 Mechanical Design 12 2.2.1 Design Description 12 2.2.2 Wrench-Maximizing Design Optimization 13 2.3 System Modeling and Control Design 20 2.3.1 System Modeling 20 2.3.2 Pose Trajectory Tracking Control 22 2.3.3 Hybrid Pose/Wrench Control 22 2.3.4 PSPM-Based Teleoperation 24 2.4 Control Allocation with Selective Mapping 27 2.4.1 Infinity-Norm Minimization 27 2.4.2 ESC-Induced Singularity and Selective Mapping 29 2.5 Experiment 38 2.5.1 System Setup 38 2.5.2 Experiment Results 41 2.6 Conclusion 49 3 Pose and Posture Estimation of an Aerial Skeleton System 51 3.1 Introduction 51 3.2 Preliminary 53 3.3 Pose and Posture Estimation 55 3.3.1 Estimation Algorithm via SCKF 55 3.3.2 Semi-Distributed Version of Algorithm 59 3.4 Simulation 62 3.5 Experiment 65 3.5.1 System Setup 65 3.5.2 Experiment of SCKF-Based Estimation Algorithm 66 3.6 Conclusion 69 4 CPG-Based Motion Generation 71 4.1 Introduction 71 4.2 Description of Entire Framework 75 4.2.1 LASDRA System 75 4.2.2 Snake-Like Robot & Pivotboard 77 4.3 CPG Model 79 4.3.1 LASDRA System 79 4.3.2 Snake-Like Robot 80 4.3.3 Pivotboard 83 4.4 Target Pose Calculation with Expected Physics 84 4.5 Inverse Model Learning 86 4.5.1 LASDRA System 86 4.5.2 Snake-Like Robot 89 4.5.3 Pivotboard 90 4.6 CPG Parameter Adaptation 93 4.7 Simulation 94 4.7.1 LASDRA System 94 4.7.2 Snake-Like Robot & Pivotboard 97 4.8 Conclusion 101 5 Outdoor Flight Experiment of the F-LASDRA System 103 5.1 System Setup 103 5.2 Experiment Results 104 6 Conclusion 111 6.1 Summary 111 6.2 Future Works 112Docto

Modelling, Analysis, and Control of OmniMorph: an Omnidirectional Morphing Multi-rotor UAV

This paper introduces for the first time the design, modelling, and control of a novel morphing multi-rotor Unmanned Aerial Vehicle (UAV) that we call the OmniMorph. The morphing ability allows the selection of the configuration that optimizes energy consumption while ensuring the needed maneuverability for the required task. The most energy-efficient uni-directional thrust (UDT) configuration can be used, e.g., during standard point-to-point displacements. Fully-actuated (FA) and omnidirectional (OD) configurations can be instead used for full pose tracking, such as, e.g., constant attitude horizontal motions and full rotations on the spot, and for full wrench 6D interaction control and 6D disturbance rejection. Morphing is obtained using a single servomotor, allowing possible minimization of weight, costs, and maintenance complexity. The actuation properties are studied, and an optimal controller that compromises between performance and control effort is proposed and validated in realistic simulations. Preliminary tests on the prototype are presented to assess the propellers’ mutual aerodynamic interference.</p

Design, Modeling, and Geometric Control on SE(3) of a Fully-Actuated Hexarotor for Aerial Interaction

In this work we present the optimization-based design and control of a fully-actuated omnidirectional hexarotor. The tilt angles of the propellers are designed by maximizing the control wrench applied by the propellers. This maximizes (a) the agility of the UAV, (b) the maximum payload the UAV can hover with at any orientation, and (c) the interaction wrench that the UAV can apply to the environment in physical contact. It is shown that only axial tilting of the propellers with respect to the UAV's body yields optimal results. Unlike the conventional hexarotor, the proposed hexarotor can generate at least 1.9 times the maximum thrust of one rotor in any direction, in addition to the higher control torque around the vehicle's upward axis. A geometric controller on SE(3) is proposed for the trajectory tracking problem for the class of fully actuated UAVs. The proposed controller avoids singularities and complexities that arise when using local parametrizations, in addition to being invariant to a change of inertial coordinate frame. The performance of the controller is validated in simulation.Comment: 9 pages, 9 figures, ICRA201

Modelling, Analysis and Control of OmniMorph: an Omnidirectional Morphing Multi-rotor UAV

This paper introduces for the first time the design, modelling, and control of a novel morphing multi-rotor Unmanned Aerial Vehicle (UAV) that we call the OmniMorph. The morphing ability allows the selection of the configuration that optimizes energy consumption while ensuring the needed maneuverability for the required task. The most energy-efficient uni-directional thrust (UDT) configuration can be used, e.g., during standard point-to-point displacements. Fully-actuated (FA) and omnidirectional (OD) configurations can be instead used for full pose tracking, such as, e.g., constant attitude horizontal motions and full rotations on the spot, and for full wrench 6D interaction control and 6D disturbance rejection. Morphing is obtained using a single servomotor, allowing possible minimization of weight, costs, and maintenance complexity. The actuation properties are studied, and an optimal controller that compromises between performance and control effort is proposed and validated in realistic simulations

UAS Simulator for Modeling, Analysis and Control in Free Flight and Physical Interaction

This paper presents the ARCAD simulator for the rapid development of Unmanned Aerial Systems (UAS), including underactuated and fully-actuated multirotors, fixed-wing aircraft, and Vertical Take-Off and Landing (VTOL) hybrid vehicles. The simulator is designed to accelerate these aircraft's modeling and control design. It provides various analyses of the design and operation, such as wrench-set computation, controller response, and flight optimization. In addition to simulating free flight, it can simulate the physical interaction of the aircraft with its environment. The simulator is written in MATLAB to allow rapid prototyping and is capable of generating graphical visualization of the aircraft and the environment in addition to generating the desired plots. It has been used to develop several real-world multirotor and VTOL applications. The source code is available at https://github.com/keipour/aircraft-simulator-matlab.Comment: In proceedings of the 2023 AIAA SciTech Forum, Session: Air and Space Vehicle Dynamics, Systems, and Environments II

Design, Control, and Motion Strategy of TRADY: Tilted-Rotor-Equipped Aerial Robot With Autonomous In-Flight Assembly and Disassembly Ability

In previous research, various types of aerial robots were developed to improve maneuverability or manipulation abilities. However, there was a challenge in achieving both mobility and manipulation capabilities simultaneously. This is because aerial robots with high mobility lack the necessary rotors to perform manipulation tasks, while those with manipulation ability are too large to achieve high mobility. To address this issue, a new aerial robot called TRADY was introduced in this article. TRADY is a tilted-rotor-equipped aerial robot that can autonomously assemble and disassemble in-flight, allowing for a switch in control model between under-actuated and fully-actuated models. The system features a novel docking mechanism and optimized rotor configuration, as well as a control system that can transition between under-actuated and fully-actuated modes and compensate for discrete changes. Additionally, a new motion strategy for assembly/disassembly motion that includes recovery behavior from hazardous conditions was introduced. Experimental results showed that TRADY can successfully execute aerial assembly/disassembly motions with a 90% success rate and generate more than nine times the torque of a single unit in the assembly state. This is the first robot system capable of performing both assembly and disassembly while seamlessly transitioning between fully-actuated and under-actuated models