576 research outputs found
Single-Rate and Multi-Rate Multi-Service Systems for Next Generation and Beyond Communications
To flexibly support diverse communication requirements (e.g., throughput, latency, massive connection, etc.) for the next generation wireless communications, one viable solution is to divide the system bandwidth into several service subbands, each for a different type of service. In such a multi-service (MS) system, each service has its optimal frame structure while the services are isolated by subband filtering. In this paper, a framework for multi-service (MS) system is established based on subband filtered multi-carrier (SFMC) modulation. We consider both single-rate (SR) and multi-rate (MR) signal processing as two different MS-SFMC implementations, each having different performance and computational complexity. By comparison, the SR system outperforms the MR system in terms of performance while the MR system has a significantly reduced computational complexity than the SR system. Numerical results show the effectiveness of our analysis and the proposed systems. These proposed SR and MR MS-SFMC systems provide guidelines for next generation wireless system frame structure optimization and algorithm design
Multi-service Signal Multiplexing and Isolation for Physical-Layer Network Slicing (PNS)
Network slicing has been identified as one of the most important features for 5G and beyond to enable operators to utilize networks on an as-a-service basis and meet the wide range of use cases. In physical layer, the frequency and time resources are split into slices to cater for the services with individual optimal designs, resulting in services/slices having different baseband numerologies (e.g., subcarrier spacing) and / or radio frequency (RF) front-end configurations. In such a system, the multi-service signal multiplexing and isolation among the service/slices are critical for the Physical-Layer Network Slicing (PNS) since orthogonality is destroyed and significant inter-service/ slice-band-interference (ISBI) may be generated. In this paper, we first categorize four PNS cases according to the baseband and RF configurations among the slices. The system model is established by considering a low out of band emission (OoBE) waveform operating in the service/slice frequency band to mitigate the ISBI. The desired signal and interference for the two slices are derived. Consequently, one-tap channel equalization algorithms are proposed based on the derived model. The developed system models establish a framework for further interference analysis, ISBI cancelation algorithms, system design and parameter selection (e.g., guard band), to enable spectrum efficient network slicing
Subband filtered multi-carrier systems for multi-service wireless communications
Flexibly supporting multiple services, each with different communication requirements and frame structure, has been identified as one of the most significant and promising characteristics of next generation and beyond wireless communication systems. However, integrating multiple frame structures with different subcarrier spacing in one radio carrier may result in significant inter-service-band-interference (ISBI). In this paper, a framework for multi-service (MS) systems is established based on a subband filtered multi-carrier system. The subband filtering implementations and both asynchronous and generalized synchronous (GS) MS subband filtered multi-carrier (SFMC) systems have been proposed. Based on the GS-MS-SFMC system, the system model with ISBI is derived and a number of properties on ISBI are given. In addition, low-complexity ISBI cancelation algorithms are proposed by precoding the information symbols at the transmitter. For asynchronous MS-SFMC system in the presence of transceiver imperfections, including carrier frequency offset, timing offset, and phase noise, a complete analytical system model is established in terms of desired signal, inter-symbol-interference, inter-carrier-interference, ISBI, and noise. Thereafter, new channel equalization algorithms are proposed by considering the errors and imperfections. Numerical analysis shows that the analytical results match the simulation results, and the proposed ISBI cancelation and equalization algorithms can significantly improve the system performance in comparison with the existing algorithms
Multi-service systems: an enabler of flexible 5G air-interface
Multi-service system is an enabler to flexibly support
diverse communication requirements for the next generation
wireless communications. In such a system, multiple types of
services co-exist in one baseband system with each service having
its optimal frame structure and low out of band emission (OoBE)
waveforms operating on the service frequency band to reduce the
inter-service-band-interference (ISvcBI). In this article, a
framework for multi-service system is established and the
challenges and possible solutions are studied. The multi-service
system implementation in both time and frequency domain is
discussed. Two representative subband filtered multicarrier
(SFMC) waveforms: filtered orthogonal frequency division
multiplexing (F-OFDM) and universal filtered multi-carrier
(UFMC) are considered in this article. Specifically, the design
methodology, criteria, orthogonality conditions and prospective
application scenarios in the context of 5G are discussed. We
consider both single-rate (SR) and multi-rate (MR) signal
processing methods. Compared with the SR system, the MR
system has significantly reduced computational complexity at the
expense of performance loss due to inter-subband-interference
(ISubBI) in MR systems. The ISvcBI and ISubBI in MR systems
are investigated with proposed low-complexity interference
cancelation algorithms to enable the multi-service operation in
low interference level conditions
Low-power Physical-layer Design for LTE Based Very NarrowBand IoT (VNB - IoT) Communication
abstract: With the new age Internet of Things (IoT) revolution, there is a need to connect a wide range of devices with varying throughput and performance requirements. In this thesis, a wireless system is proposed which is targeted towards very low power, delay insensitive IoT applications with low throughput requirements. The low cost receivers for such devices will have very low complexity, consume very less power and hence will run for several years.
Long Term Evolution (LTE) is a standard developed and administered by 3rd Generation Partnership Project (3GPP) for high speed wireless communications for mobile devices. As a part of Release 13, another standard called narrowband IoT (NB-IoT) was introduced by 3GPP to serve the needs of IoT applications with low throughput requirements. Working along similar lines, this thesis proposes yet another LTE based solution called very narrowband IoT (VNB-IoT), which further reduces the complexity and power consumption of the user equipment (UE) while maintaining the base station (BS) architecture as defined in NB-IoT.
In the downlink operation, the transmitter of the proposed system uses the NB-IoT resource block with each subcarrier modulated with data symbols intended for a different user. On the receiver side, each UE locks to a particular subcarrier frequency instead of the entire resource block and operates as a single carrier receiver. On the uplink, the system uses a single-tone transmission as specified in the NB-IoT standard.
Performance of the proposed system is analyzed in an additive white Gaussian noise (AWGN) channel followed by an analysis of the inter carrier interference (ICI). Relationship between the overall filter bandwidth and ICI is established towards the end.Dissertation/ThesisMasters Thesis Electrical Engineering 201
On The Non-linear Distortion Effects in an OFDM-RoF Link
Radio over Fiber (RoF) system is a promising technique for microcell and picocell applications for deployment of future ubiquitous wireless data networks. However, the performance of RoF systems can be severely degraded due to non-linear effects in the channel. Also, Orthogonal Frequency Division Multiplexing (OFDM), as a standard for broadband wireless networks, is being proposed for deployment with RoF systems to facilitate the total performance of a system. In this research, at first, the performance of OFDM-based RoF link with Mach-Zehnder modulator distortion effects has been analyzed at 5.8 GHz. Evaluation of mean-squared error of the proposed OFDM-RoF system was carried out to compare with the conventional single carrier system based RoF link after the modulator distortion case and also for fixed Signal to Noise Ratio (SNR) of 20 dB using undistorted OFDM signal. Later, nominal and offset biasing pre-distortion techniques are applied in proposed system to linearize the OFDM-RoF link. Thus, finally a comparison between the aforementioned pre-distortion techniques applied showed important observation in terms of distortion-free dynamic range and SNR to choose offset pre-distortion technique for our proposed system
- …