Massive MIMO Extensions to the COST 2100 Channel Model: Modeling and Validation

To enable realistic studies of massive multiple-input multiple-output systems, the COST 2100 channel model is extended based on measurements. First, the concept of a base station-side visibility region (BS-VR) is proposed to model the appearance and disappearance of clusters when using a physically-large array. We find that BS-VR lifetimes are exponentially distributed, and that the number of BS-VRs is Poisson distributed with intensity proportional to the sum of the array length and the mean lifetime. Simulations suggest that under certain conditions longer lifetimes can help decorrelating closely-located users. Second, the concept of a multipath component visibility region (MPC-VR) is proposed to model birth-death processes of individual MPCs at the mobile station side. We find that both MPC lifetimes and MPC-VR radii are lognormally distributed. Simulations suggest that unless MPC-VRs are applied the channel condition number is overestimated. Key statistical properties of the proposed extensions, e.g., autocorrelation functions, maximum likelihood estimators, and Cramer-Rao bounds, are derived and analyzed.Comment: Submitted to IEEE Transactions of Wireless Communication

Analysis of Channel Measurements Using a Very Large Antenna Array

Accurate wireless channel models are crucial to simulate the effect of radio wave propagation in a channel on wireless communication systems. By calculating physical processing effects that signal undergoes while traveling from transmitter to the receiver, channel models help to analyze performance of wireless systems. State of the art channel model such as WINNER and COST 2100 are able to model the characteristics of conventional MIMO (Multiple-Input Multiple-Output) systems (where moderate number of antennas is used at the two sides of the link) with sufficient accuracy. However, model extensions are needed for the current models in order to be able to capture new propagation characteristics result from having massive number of antenna elements at one or both ends of the communication link. In this thesis work, a measurement campaign is performed using very large antenna array (about 7.5m long) in order to study key propagation characteristics for massive MIMO. The channel measurements are performed using two frequency bands (2.6 GHz and 5.1 GHz), vertical and horizontal antenna polarizations, directional and omni-directional antennas. Effect of aforementioned setup parameters on cluster delay and angle spreads, power slope and shadowing, number of clusters and their observation lengths are studied in this work. Also correlation among estimated cluster parameters is presented. It was observed, that antenna polarization does not have significant effect on estimated cluster parameters. On the other hand, some estimated parameters like delay and angle spread, shadowing achieve higher values using 2.6 GHz band. Impact of antenna directivity was not very significant. Results of this thesis work are important while implementing extension for cluster-based COST 2100 channel model for massive MIMO case

Massive MIMO performance evaluation based on measured propagation data

Massive MIMO, also known as very-large MIMO or large-scale antenna systems, is a new technique that potentially can offer large network capacities in multi-user scenarios. With a massive MIMO system, we consider the case where a base station equipped with a large number of antenna elements simultaneously serves multiple single-antenna users in the same time-frequency resource. So far, investigations are mostly based on theoretical channels with independent and identically distributed (i.i.d.) complex Gaussian coefficients, i.e., i.i.d. Rayleigh channels. Here, we investigate how massive MIMO performs in channels measured in real propagation environments. Channel measurements were performed at 2.6 GHz using a virtual uniform linear array (ULA) which has a physically large aperture, and a practical uniform cylindrical array (UCA) which is more compact in size, both having 128 antenna ports. Based on measurement data, we illustrate channel behavior of massive MIMO in three representative propagation conditions, and evaluate the corresponding performance. The investigation shows that the measured channels, for both array types, allow us to achieve performance close to that in i.i.d. Rayleigh channels. It is concluded that in real propagation environments we have characteristics that can allow for efficient use of massive MIMO, i.e., the theoretical advantages of this new technology can also be harvested in real channels.Comment: IEEE Transactions on Wireless Communications, 201

Measured Channel Hardening in an Indoor Multiband Scenario

A study of channel hardening in a large-scale antenna system has been carried out by means of indoor channel measurements over four frequency bands, namely 1.472 GHz, 2.6 GHz, 3.82 GHz and 4.16 GHz. NTNU's Reconfigurable Radio Network Platform has been used to record the channel estimates for 40 single user non-line of sight radio links to a 64 element wide-band antenna array. By examining the rms delay spread and the ratio of the normalized subcarrier to average SISO link power of the radio channel received by a single user after combination, the hardening of this equivalent channel is analyzed for various numbers of nodes. The channel hardening merits show consistent behaviour throughout the frequency bands. By combining 16 antennas the rms delay spread of the equivalent channel is reduced from above 100 ns to below 35 ns with significantly reduced variation in the channel power.Comment: 6 pages, 7 figures, presented at IEEE PIMRC 201

Low-Complexity Hybrid Beamforming for Massive MIMO Systems in Frequency-Selective Channels

Hybrid beamforming for frequency-selective channels is a challenging problem as the phase shifters provide the same phase shift to all of the subcarriers. The existing approaches solely rely on the channel's frequency response and the hybrid beamformers maximize the average spectral efficiency over the whole frequency band. Compared to state-of-the-art, we show that substantial sum-rate gains can be achieved, both for rich and sparse scattering channels, by jointly exploiting the frequency and time domain characteristics of the massive multiple-input multiple-output (MIMO) channels. In our proposed approach, the radio frequency (RF) beamformer coherently combines the received symbols in the time domain and, thus, it concentrates signal's power on a specific time sample. As a result, the RF beamformer flattens the frequency response of the "effective" transmission channel and reduces its root mean square delay spread. Then, a baseband combiner mitigates the residual interference in the frequency domain. We present the closed-form expressions of the proposed beamformer and its performance by leveraging the favorable propagation condition of massive MIMO channels and we prove that our proposed scheme can achieve the performance of fully-digital zero-forcing when number of employed phase shifter networks is twice the resolvable multipath components in the time domain.Comment: Accepted to IEEE Acces

A Survey of Air-to-Ground Propagation Channel Modeling for Unmanned Aerial Vehicles

In recent years, there has been a dramatic increase in the use of unmanned aerial vehicles (UAVs), particularly for small UAVs, due to their affordable prices, ease of availability, and ease of operability. Existing and future applications of UAVs include remote surveillance and monitoring, relief operations, package delivery, and communication backhaul infrastructure. Additionally, UAVs are envisioned as an important component of 5G wireless technology and beyond. The unique application scenarios for UAVs necessitate accurate air-to-ground (AG) propagation channel models for designing and evaluating UAV communication links for control/non-payload as well as payload data transmissions. These AG propagation models have not been investigated in detail when compared to terrestrial propagation models. In this paper, a comprehensive survey is provided on available AG channel measurement campaigns, large and small scale fading channel models, their limitations, and future research directions for UAV communication scenarios

Initial Characterization of Massive Multi-User MIMO Channels at 2.6 GHz in Indoor and Outdoor Environments

The channel properties have a large influence on user separability in massive multi-user multiple-input multiple-output (massive MIMO) systems. In this paper we present spatio-temporal characteristics obtained from massive MIMO channel measurements at 2.6 GHz. The results are based on data acquired in both indoor and outdoor scenarios where a base station equipped with 64 dual-polarized antenna elements communicates simultaneously with nine single-antenna users. In the outdoor scenarios the base station is placed at two rooftops with different heights and the users are confined to a five-meter diameter circle and move rando mly at pedestrian speeds. In the indoor scenarios, the users are located close to each other in a lecture theater and the base station is placed at various locations in the room. We report on the observed distribution of the delay spreads and angular spreads. Furthermore, the multi-user performance in terms of singular value spread of the MU-MIMO channel is also reported. Finally, statistics of the coherence time and coherence bandwidth of the propagation channel in various scenarios are given. The results are important for the design and analysis of massive MU-MIMO systems, as well as in the development of realistic massive MU-MIMO channel models