Possible Realization and Protection of Valley-Polarized Quantum Hall Effect in Mn/WS2

By using the first-principles calculations and model analyses, we found that the combination of defected tungsten disulfide monolayer and sparse manganese adsorption may give a KK` valley spin splitting up to 210 meV. This system also has a tunable magnetic anisotropy energy, a clean band gap, and an appropriate band alignment, with the Fermi level sitting right above the top of valence bands at the K-valleys. Therefore, it can be used for the realization of the valley-polarized anomalous Hall effect and for the exploration of other valley related physics without using optical methods. A protective environment can be formed by covering it with a hexagonal BN layer, without much disturbance to the benign properties of Mn/WS2.Comment: 16 pages, 4 figure

Performance of coated columbium and tantalum alloys in plasma arc reentry simulation tests

The evaluation of coated refractory metals screened in stagnation model plasma arc tests is reported. Columbium alloys FS-85, C-129Y, and Cb-752 coated with Si-20Cr-20Fe (R512E) were tested at 1390 C. Three silicide coatings on Ta-10W were tested at 1470 C. Half-hour cycles and a 6500 N/sqm stagnation pressure were used. The best R512E coated columbium alloy was FS-85 with first local coating breakdowns occurring in 12 to 50 cycles. At coating defects, low metal recession rates (0.005 mm/min) were generally observed on coated columbium alloys while high rates (0.15 mm/min) were observed on coated Ta-10W. Coated columbium suffered large emittance losses (to below 0.7) due to surface refractory metal pentoxide formation

A Theoretical Simulation of Deformed Carbon Nanotubes with Adsorbed Metal Atoms: Enhanced Reactivity by Deformation

First-principles simulations were performed to investigate reaction of carbon nanotubes with adsorbed metal atoms. Mechanical modification of their structures enhances chemical reactivity of carbon nanotubes. Adsorption of a tungsten, tantalum, or niobium atom on a (5, 0) nanotube with a Stone-Wales defect was shown to have characteristically strong chemisorption. Bond-breaking in the carbon-carbon network and formation of a local metal-carbon complex were observed during the simulation. Adsorption of W, Ta, Ni or Mo on a twisted (5, 0) nanotube showed a preferred breaking of several bonds, even creating an opening in the wall. The enhanced chemical reactivity of deformed nanotubes is characterized by formation of a metal-carbon complex. Applications of the reaction are suggested.Comment: 12 pages, 4 figure

Incorporating non-adiabatic effects in Embedded Atom potentials for radiation damage cascade simulations

In radiation damage cascade displacement spikes ions and electrons can reach very high temperatures and be out of thermal equilibrium. Correct modelling of cascades with molecular dynamics should allow for the non-adiabatic exchange of energy between ions and electrons using a consistent model for the electronic stopping, electronic temperature rise, and thermal conduction by the electrons. We present a scheme for correcting embedded atom potentials for these non-adiabatic properties at the level of the second-moment approximation, and parameterize for the bcc transition metals above the Debye temperature. We use here the Finnis-Sinclair and Derlet-Nguyen-Manh-Dudarev potentials as models for the bonding, but the corrections derived from them can be applied to any suitable empirical potential.Comment: 31 pages, 6 figures. This is an author-created, un-copyedited version of an article submitted for publication in : J. Phys.: Condens. Matter. IOP Publishing Ltd is not responsible for any errors or omissions in this version of the manuscript or any version derived from i

Anelastic deformation of boron fibers

The flexural deformation behavior of vapor-deposited boron fibers was examined from 100 to 1100 K by stress-relaxation and internal friction techniques. Only strong thermally-activated anelasticity was observed with no evidence of plasticity up to surface strains of 0.006. The parameters governing the relaxation processes within the anelastic spectra of as-received and annealed fibers were determined. These parameters were correlated with X-ray structure studies to develop preliminary models for the sources of boron's anelasticity. The large relaxation strengths of the dominant Ia processes coupled with their relaxation times and energies suggest a sliding mechanism between certain basic structural subunits common to both the beta-rhombohedral and vapor-deposited boron structures

Spin injection from EuS/Co multilayers into GaAs detected by polarized electroluminescence

We report on the successful spin injection from EuS/Co multilayers into (100) GaAs at low temperatures. The spin injection was verified by means of polarized electroluminescence (EL) emitted from AlGaAs/GaAs-based spin-light-emitting diodes in zero external magnetic field. Spin-polarized electrons were injected from prototype EuS/Co spin injector multilayers. The use of semiconducting and ferromagnetic EuS circumvents the impedance mismatch. The EL was measured in side emission with and without an external magnetic field. A circular polarization of 5% at 8 K and 0 T was observed. In view of the rather rough interface between the GaAs substrate and first EuS layer, improvement of the interface quality is expected to considerably enhance the injected electron spin polarization

Infrared Thermography for Weld Inspection: Feasibility and Application

Traditional ultrasonic testing (UT) techniques have been widely used to detect surface and sub-surface defects of welds. UT inspection is a contact method which burdens the manufacturer by storing hot specimens for inspection when the material is cool. Additionally, UT is only valid for 5 mm specimens or thicker and requires a highly skilled operator to perform the inspections and interpret the signals. Infrared thermography (IRT) has the potential to be implemented for weld inspections due to its non-contact nature. In this study, the feasibility of using IRT to overcome the limitations of UT inspection is investigated to detect inclusion, porosity, cracking, and lack of fusion in 38 weld specimens with thicknesses of 3, 8 and 13 mm. UT inspection was also performed to locate regions containing defects in the 8 mm and 13 mm specimens. Results showed that regions diagnosed with defects by the UT inspection lost heat faster than the sound weld. The IRT method was applied to six 3 mm specimens to detect their defects and successfully detected lack of fusion in one of them. All specimens were cut at the locations indicated by UT and IRT methods which proved the presence of a defect in 86% of the specimens. Despite the agreement with the UT inspection, the proposed IRT method had limited success in locating the defects in the 8 mm specimens. To fully implement in-line IRT-based weld inspections more investigations are required