2,406 research outputs found
BAN-GZKP: Optimal Zero Knowledge Proof based Scheme for Wireless Body Area Networks
BANZKP is the best to date Zero Knowledge Proof (ZKP) based secure
lightweight and energy efficient authentication scheme designed for Wireless
Area Network (WBAN). It is vulnerable to several security attacks such as the
replay attack, Distributed Denial-of-Service (DDoS) attacks at sink and
redundancy information crack. However, BANZKP needs an end-to-end
authentication which is not compliant with the human body postural mobility. We
propose a new scheme BAN-GZKP. Our scheme improves both the security and
postural mobility resilience of BANZKP. Moreover, BAN-GZKP uses only a
three-phase authentication which is optimal in the class of ZKP protocols. To
fix the security vulnerabilities of BANZKP, BAN-GZKP uses a novel random key
allocation and a Hop-by-Hop authentication definition. We further prove the
reliability of our scheme to various attacks including those to which BANZKP is
vulnerable. Furthermore, via extensive simulations we prove that our scheme,
BAN-GZKP, outperforms BANZKP in terms of reliability to human body postural
mobility for various network parameters (end-to-end delay, number of packets
exchanged in the network, number of transmissions). We compared both schemes
using representative convergecast strategies with various transmission rates
and human postural mobility. Finally, it is important to mention that BAN-GZKP
has no additional cost compared to BANZKP in terms memory, computational
complexity or energy consumption
Improving practical sensitivity of energy optimized wake-up receivers: proof of concept in 65nm CMOS
We present a high performance low-power digital base-band architecture,
specially designed for an energy optimized duty-cycled wake-up receiver scheme.
Based on a careful wake-up beacon design, a structured wake-up beacon detection
technique leads to an architecture that compensates for the implementation loss
of a low-power wake-up receiver front-end at low energy and area costs. Design
parameters are selected by energy optimization and the architecture is easily
scalable to support various network sizes. Fabricated in 65nm CMOS, the digital
base-band consumes 0.9uW (V_DD=0.37V) in sub-threshold operation at 250kbps,
with appropriate 97% wake-up beacon detection and 0.04% false alarm
probabilities. The circuit is fully functional at a minimum V_DD of 0.23V at
f_max=5kHz and 0.018uW power consumption. Based on these results we show that
our digital base-band can be used as a companion to compensate for front-end
implementation losses resulting from the limited wake-up receiver power budget
at a negligible cost. This implies an improvement of the practical sensitivity
of the wake-up receiver, compared to what is traditionally reported.Comment: Submitted to IEEE Sensors Journa
Survey and Systematization of Secure Device Pairing
Secure Device Pairing (SDP) schemes have been developed to facilitate secure
communications among smart devices, both personal mobile devices and Internet
of Things (IoT) devices. Comparison and assessment of SDP schemes is
troublesome, because each scheme makes different assumptions about out-of-band
channels and adversary models, and are driven by their particular use-cases. A
conceptual model that facilitates meaningful comparison among SDP schemes is
missing. We provide such a model. In this article, we survey and analyze a wide
range of SDP schemes that are described in the literature, including a number
that have been adopted as standards. A system model and consistent terminology
for SDP schemes are built on the foundation of this survey, which are then used
to classify existing SDP schemes into a taxonomy that, for the first time,
enables their meaningful comparison and analysis.The existing SDP schemes are
analyzed using this model, revealing common systemic security weaknesses among
the surveyed SDP schemes that should become priority areas for future SDP
research, such as improving the integration of privacy requirements into the
design of SDP schemes. Our results allow SDP scheme designers to create schemes
that are more easily comparable with one another, and to assist the prevention
of persisting the weaknesses common to the current generation of SDP schemes.Comment: 34 pages, 5 figures, 3 tables, accepted at IEEE Communications
Surveys & Tutorials 2017 (Volume: PP, Issue: 99
Towards energy-autonomous wake-up receiver using visible light communication
The use of Visible Light Communication (VLC) in wake-up communication systems is a potential energy-efficient and low-cost solution for wireless communication of consumer electronics. In this paper, we go one step further and propose the use of visible light both for wake-up communication and energy harvesting purposes, with the final objective of an energy-autonomous wake-up receiver module. We first present the details and the design criteria of this novel system. We then present the results of evaluation of design criteria such as solar panel and capacitor type choices. To evaluate the performance of the developed wake-up system with energy-autonomous receiver system, we perform realistic indoor scenario tests, analyzing the effect of varying distances, angles, and light intensities as well as the effect of presence of interfering lights.Peer ReviewedPostprint (author's final draft
A wireless system for monitoring leakage current in electrical substation equipment
In this paper, the design and the development of a remote system for continuous monitoring of leakage currents and ground currents in high voltage electrical substations are proposed. Based on wireless local area network technology, the system can be used to monitor continuously a variety of plants within the substation and has low power consumption with inbuilt overvoltage protection. It consists of a transmitter module equipped with a data acquisition (DAQ) system connected to leakage current and voltage sensors, and a receiver module connected to a remote controller for data processing and storage. The principle of operation and the characteristics of the various components of the system are described. Validation tests have been used to verify its performance in three different test situations: A) laboratory monitoring of the leakage current and voltage of a distribution surge arrester; B) laboratory measurement of the leakage current of an outdoor insulator; and C) field monitoring of the earth current and potential rise of high-voltage tower. The measured results are in close agreement with those recorded directly through a DAQ card with fiber-optic and coaxial cable connected systems. Data processing is carried out at the receiving end so that the monitored parameter is displayed continuously or at specified time intervals. The operation of the system has been tested and proved resilient under high-frequency interference signals such as those generated by corona and surface discharges
How Physicality Enables Trust: A New Era of Trust-Centered Cyberphysical Systems
Multi-agent cyberphysical systems enable new capabilities in efficiency,
resilience, and security. The unique characteristics of these systems prompt a
reevaluation of their security concepts, including their vulnerabilities, and
mechanisms to mitigate these vulnerabilities. This survey paper examines how
advancement in wireless networking, coupled with the sensing and computing in
cyberphysical systems, can foster novel security capabilities. This study
delves into three main themes related to securing multi-agent cyberphysical
systems. First, we discuss the threats that are particularly relevant to
multi-agent cyberphysical systems given the potential lack of trust between
agents. Second, we present prospects for sensing, contextual awareness, and
authentication, enabling the inference and measurement of ``inter-agent trust"
for these systems. Third, we elaborate on the application of quantifiable trust
notions to enable ``resilient coordination," where ``resilient" signifies
sustained functionality amid attacks on multiagent cyberphysical systems. We
refer to the capability of cyberphysical systems to self-organize, and
coordinate to achieve a task as autonomy. This survey unveils the cyberphysical
character of future interconnected systems as a pivotal catalyst for realizing
robust, trust-centered autonomy in tomorrow's world
Bioelectronic Sensor Nodes for Internet of Bodies
Energy-efficient sensing with Physically-secure communication for bio-sensors
on, around and within the Human Body is a major area of research today for
development of low-cost healthcare, enabling continuous monitoring and/or
secure, perpetual operation. These devices, when used as a network of nodes
form the Internet of Bodies (IoB), which poses certain challenges including
stringent resource constraints (power/area/computation/memory), simultaneous
sensing and communication, and security vulnerabilities as evidenced by the DHS
and FDA advisories. One other major challenge is to find an efficient on-body
energy harvesting method to support the sensing, communication, and security
sub-modules. Due to the limitations in the harvested amount of energy, we
require reduction of energy consumed per unit information, making the use of
in-sensor analytics/processing imperative. In this paper, we review the
challenges and opportunities in low-power sensing, processing and
communication, with possible powering modalities for future bio-sensor nodes.
Specifically, we analyze, compare and contrast (a) different sensing mechanisms
such as voltage/current domain vs time-domain, (b) low-power, secure
communication modalities including wireless techniques and human-body
communication, and (c) different powering techniques for both wearable devices
and implants.Comment: 30 pages, 5 Figures. This is a pre-print version of the article which
has been accepted for Publication in Volume 25 of the Annual Review of
Biomedical Engineering (2023). Only Personal Use is Permitte
- âŠ