Wireless Applications of Radio Frequency Micro-Electro-Mechanical Systems

With mass proliferation of wireless communication technologies, there is a continuous demand on fast data transmission rate and efficient use of frequency spectrum. As a result, reconfigurable systems are of significant importance and research is being conducted in numerous universities. The purpose of this research is to develop novel RF MEMS based reconfigurable wireless systems. By utilizing the RF MEMS switches as a basic building block, this thesis focus on developing a unique design technique for the design and development of RF MEMS delay line phase shifter, frequency reconfigurable antennas and pattern reconfigurable antennas. This thesis work is divided into four parts: 1. Investigation and development of nano-electro-mechanical systems (NEMS) based 3-bit phase shifter. Analyzing the slow wave structure to further reduce the size of delay line phase shifter. 2. Development of frequency reconfigurable antennas to compete with broadband and multi-band antennas. Two novel MEMS-loaded frequency reconfigurable antennas were designed with spectrum switchable between WPAN band (57 to 66 GHz) and the whole E-band (71 to 86 GHz). 3. Investigation of microstrip-to-coplanar striplines (CPS) transition balun used for antennas to explain the inherent phase delay of this type of structure. Based on the discovery, a pattern reconfigurable quasi-Yagi antenna was designed. The antenna exhibits excellent RF performance, compact size and switchable end-fire radiation pattern with the goal to replacing existing phased array antennas. It has the full functionality of a multi-antenna phased array plus phase shifting network while its size is same as a fixed single Yagi antenna. 4. Development of full seven masks all metal fabrication process of the RF MEMS integrated reconfigurable antennas. The fabrication processes are optimized based on Australian National Fabrication Facility (ANFF) New South Wales node’s equipment

Chipless Radio Frequency Identification (RFID) Tag Utilizing Beamforming Technique

This work is a paper based dissertation which presents a new method to design low cost chipless radio-frequency identification (RFID) tags using MEMS technology. The proposed chipless tag can be batch-fabricated using a basic MEMS fabrication process. The chipless tag can operate over a wide range of frequencies including the conventional UHF band for RFID applications. The elimination of the chip can reduces the tag price to the extent that it becomes an alternative solution to barcode labels. A prototype of the tag is implemented using a basic fabrication process and measurements are performed to validate its functionality. For the RFID reader, a direct conversion passive micro-mixer combined with a 180 degrees ring hybrid coupler is realized to operate over the unlicensed 60 GHz frequency band. This is followed by a low phase error Rotman lens combined with a patch antenna array in each output port to support beam steering and increasing the communication range. Experimental measurements on a fabricated 3-bit chipless tag show that the tag can backscatter a unique identification code to an RFID interrogator

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium