5,314 research outputs found

    Vegetable proteins in microencapsulation: a review of recent interventions and their effectiveness

    Get PDF
    Proteins from vegetable seeds are interesting for research at present because they are an abundant alternative to animal-based sources of proteins and petroleum-derived polymers. They are a renewable and biodegradable raw material with interesting functional and/or physico-chemical properties. In microencapsulation, these biopolymers are used as a wall forming material for a variety of active compounds. In most cases, two techniques of microencapsulation, spray-drying and coacervation, are used for the preparation of microparticles from vegetable proteins. Proteins extracted from soy bean, pea and wheat have already been studied as carrier materials for microparticles. These proteins could be suitable shell or matrix materials and show good process efficiency. Some other plant proteins, such as rice, oat or sunflower, with interesting functional properties could be investigated as potential matrices for microencapsulation

    Composition and functional properties of yam bean (Pachyrhizus spp.) seed flour

    Get PDF
    Open Access JournalYam bean (Pachyrhizus spp.) is legume crop that not only produces edible roots but also has a high yield of unutilized seeds. Although the yam bean seeds are rich in protein, they are not used due to a high content of toxic rotenone. In this study, yam bean seeds were detoxified and the nutritional and functional properties of their protein determined to assess the proteins’ potential for applications. Seeds of 10 accessions (2 accessions of P. erosus, 4 accessions of P. ahipa and 4 accessions of P. tuberosus) were analyzed for proximate composition, pasting and functional properties (bulk density, least gelation concentration, water absorption capacity, oil absorption capacity, emulsifying capacity, emulsion stability, foaming capacity, foam stability and protein solubility). The results showed that yam bean seeds contained: 29.2 - 32.1 g/100g proteins, 31.3 - 33.0 g/100 g carbohydrates, 24.1 - 25.6 g/100g total fat, 7.5 - 8.1 g/100g crude fiber and 3.4 - 4.1 g/100g ash. The defatted P. erosus seed flour contained 45.6 - 48.8 g/100g protein, 32.6 - 36.5 g/100g total carbohydrate, 6.7 - 7.1 g/100g crude fiber, 6.0 - 6.4 g/100g ash and 5.2/100 g crude fat. The defatted yam bean seed flour exhibited relatively high protein solubility (68.0% - 70.4%), least gelation concentration (14%), water absorption capacity (2.8% - 2.9%) and oil absorption capacity (1.5%). The defatted flour exhibited emulsifying capacity of 35.7% - 36.0%, emulsion stability of 33.2% - 33.5%, foaming capacities of 42% and foam stability of 25.1% - 25.8%. With respect to pasting properties, the defatted yam bean seed flours exhibited pasting temperature of 80.0˚C - 81.3˚C, peak viscosity of 145.5 - 146.7 RVU, trough viscosity of 95.1 - 102.0 RVU, break down of 43.5 - 51.6 RVU, set back of 252.9 - 258.1 RVU and final viscosity of 348 - 360 RVU. The results show that yam bean seed has potential for use in both food and nonfood applications

    Green Production of Anionic Surfactant Obtained from Pea Protein

    Get PDF
    A pea protein isolate was hydrolyzed by a double enzyme treatment method in order to obtain short peptide sequences used as raw materials to produce lipopeptides-based surfactants. Pea protein hydrolysates were prepared using the combination of Alcalase and Flavourzyme. The influence of the process variables was studied to optimize the proteolytic degradation to high degrees of hydrolysis. The average peptide chain lengths were obtained at 3–5 amino acid units after a hydrolysis of 30 min with the mixture of enzymes. Then, N-acylation in water, in presence of acid chloride (C12 and C16), carried out with a conversion rate of amine functions of 90%, allowed to obtain anionic surfactant mixtures (lipopeptides and sodium fatty acids). These two steps were performed in water, in continuous and did not generate any waste. This process was therefore in line with green chemistry principles. The surface activities (CMC, foaming and emulsifying properties) of these mixtures were also studied. These formulations obtained from natural renewable resources and the reactions done under environmental respect, could replace petrochemical based surfactants for some applications

    Extruded flakes from pearl millet (Pennisetum glaucum)-carrot (Daucus carota) blended flours-production, nutritional and sensory attributes

    Get PDF
    Open Access JournalMillet flour (M) and carrot flour(C) were produced and blended in the ratios 100M:0C, 95M:5C, 90M:10C, 85M:15C and 80M:20C respectively to produce extruded flakes. The composite flours were subjected to analysis of the proximate and mineral composition, as well as functional and pasting properties. Extruded flakes were analyzed for proximate composition, total carotenoids, colour and sensory evaluation. There was no significant difference (p > 0.05) in the proximate, functional and pasting properties but there were significant differences (p 0.05) affected by extrusion cooking. In terms of the lightness (L*), redness (a*) and yellowness (b*), 100% millet flakes had the least values of 50.09, 0.076 and 10.39 respectively. Sample with 85M:15C had the overall acceptance score of 7.25. In terms of colour and taste, the sample with 90M:10C had the highest scores of 8.50 and 6.50 respectively. Sample with 85M: 15C was most preferred in terms of crunchiness. The results indicate that pearl millet and carrot are rich in different nutrient when blended in the right proportions to make composite flour, it would produce nutrient-dense food product rich in protein, vitamin Aand minerals

    Nutritional and Phytochemical Content of High-Protein Crops

    Get PDF
    The authors acknowledge support from the Scottish Government’s Rural and Environment Science and Analytical Services Division (RESAS) via their strategic research and partnership programs.Peer reviewedPostprin

    The sensory acceptance of fibre-enriched cereal foods:a meta-analysis

    Get PDF
    Improved understanding of the sensory responses to fibre fortification may assist manufacturers and health promotion efforts. The effects of fibre fortification (or modified ingredients) on sensory acceptability of baked cereal foods (bread, cookies, muffins) were estimated by linear random-effects meta-analysis of twenty eligible studies (869 panellists, 34% male). As little as 2 g per 100 g fortification caused moderate–large reductions in overall acceptability, flavour acceptability, and appearance acceptability in most items, with cookies most negatively affected. Fortification of base nonfortified foods with low initial acceptability improved acceptability; however, at higher basic levels, fortification lowered acceptability. Fortification improved texture acceptability of muffins and bread with low base acceptability, but lowered texture acceptability when base acceptability was high. Flavour improvement of muffins with fortification decreased with increasing base food acceptability. Fibre fortification of baked cereal foods lowers acceptability, but food format and base food acceptability affect the magnitude and direction of responses. Refining fibre fortification approaches could improve consumer uptake

    Improving pulse crops as a source of protein, starch and micronutrients

    Get PDF
    Pulse crops have been known for a long time to have beneficial nutritional profiles for human diets but have been neglected in terms of cultivation, consumption and scientific research in many parts of the world. Broad dietary shifts will be required if anthropogenic climate change is to be mitigated in the future, and pulse crops should be an important component of this change by providing an environmentally sustainable source of protein, resistant starch and micronutrients. Further enhancement of the nutritional composition of pulse crops could benefit human health, helping to alleviate micronutrient deficiencies and reduce risk of chronic diseases such as type 2 diabetes. This paper reviews current knowledge regarding the nutritional content of pea (Pisum sativum L.) and faba bean (Vicia faba L.), two major UK pulse crops, and discusses the potential for their genetic improvement

    Effects of extraction pH of chia protein isolates on functional properties

    Get PDF
    The aim of this work was to study the effect of the extraction pH on the functional properties of chia protein isolates (CPI). Samples were named as CPI10 or CPI12, according to their extraction pH, 10 or 12, respectively. Functional properties were significantly modified by the extraction pH. Color properties revealed that CPI12 presented a lower L* (47.8 ± 0.9 for CPI10 and 30 ± 1 for CPI12). Besides, a higher b* value was obtained for CPI12 (7.0 ± 0.3 for CPI12 and 5.6 ± 0.7 for CPI10), as a result of a higher ash content. CPI12 showed a higher WAC probably due to a higher exposure of polar amino acids (4.4 ± 0.1 g/g and 6.0 ± 0.2 g/g), whereas CPI10 showed a higher ability to bind oil (7.1 ± 0.2 g/g and 6.1 ± 0.2 g/g for CPI10 and CPI12, respectively). CPI10 proved more appropriate as an emulsion stabilizer than CPI12, which could be due to its higher surface hydrophobicity, protein solubility and negative net charge. The d4,3 (μm) was 29.5 ± 0.4 and 20.4 ± 0.3 in emulsions stabilized with CPI12 and CPI10, respectively. Although both isolates underwent heat gelation, they exhibited a weak gel behavior. Overall, CPI10 may be more suitable for the food industry as a meat replacer or extender.Fil: López, Débora Natalia. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Departamento de Química y Física. Área Fisicoquímica; ArgentinaFil: Ingrassia, Romina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario; Argentina. Universidad Nacional de Rosario. Facultad de Ciencias Bioquímicas y Farmacéuticas. Departamento de Química y Física. Área Fisicoquímica; ArgentinaFil: Busti, Pablo Andres. Universidad Nacional de Rosario; ArgentinaFil: Wagner, Jorge Ricardo. Consejo Nacional de Investigaciones Científicas y Técnicas; Argentina. Universidad Nacional de Quilmes; ArgentinaFil: Spelzini, Darío. Universidad Nacional de Rosario; Argentina. Pontificia Universidad Católica Argentina "Santa María de los Buenos Aires"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario; ArgentinaFil: Boeris, Valeria. Pontificia Universidad Católica Argentina "Santa María de los Buenos Aires"; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Centro Científico Tecnológico Conicet - Rosario; Argentina. Universidad Nacional de Rosario; Argentin

    Evaluation of the functional properties of mung bean protein isolate for development of textured vegetable protein

    Get PDF
    Mung bean is considered a ‘green pearl’ for its relatively high protein content; however, it has limited application as a raw material for industrial food products. As the potential use of mung beans relies on its protein behavior, this study characterized the functional properties of mung bean protein isolates and the results were compared with soy protein isolates. The protein isolates were prepared from mung bean and soy bean flours via extraction with 1 N NaOH, precipitated at pH 4, and subsequently freeze-dried. The amino acid profile as well as the hydrophilic and hydrophobic ratio of mung bean protein isolate, had been comparable with soy protein isolate. The water and oil absorption capacities as well as the denaturation temperature of mung bean protein isolate, were found to be similar with those of soy bean protein isolate. However, foaming capacity (89.66%) of mung bean protein isolate was higher than that of soy protein isolate (68.66%). Besides, least gelation concentration (LGC) of mung bean protein isolate (12%) was also close to LGC of soy protein isolate (14%), while the protein solubility was comparable between both the isolated proteins. The physical features of the textured mung bean were close to the commercial textured soy protein, which showed a heterogeneous and porous network like matrix when the mung bean flour was extruded to measure its potentiality to produce textured vegetable protein all seaweed extracts. Results showed that extraction parameters had significant effect (p < 0.05) on the antioxidant compounds and antioxidant capacities of seaweed. Sargassum polycystum portrayed the most antioxidant compounds (37.41 ± 0.01 mg GAE/g DW and 4.54 ± 0.02 mg CE/g DW) and capacities (2.00 ± 0.01 μmol TEAC/g DW and 0.84 ± 0.01 μmol TEAC/g DW) amongst four species of seaweed
    corecore