770 research outputs found
Generalized Spatial Modulation in Large-Scale Multiuser MIMO Systems
Generalized spatial modulation (GSM) uses transmit antenna elements but
fewer transmit radio frequency (RF) chains, . Spatial modulation (SM)
and spatial multiplexing are special cases of GSM with and
, respectively. In GSM, in addition to conveying information bits
through conventional modulation symbols (for example, QAM), the
indices of the active transmit antennas also convey information bits.
In this paper, we investigate {\em GSM for large-scale multiuser MIMO
communications on the uplink}. Our contributions in this paper include: ()
an average bit error probability (ABEP) analysis for maximum-likelihood
detection in multiuser GSM-MIMO on the uplink, where we derive an upper bound
on the ABEP, and () low-complexity algorithms for GSM-MIMO signal detection
and channel estimation at the base station receiver based on message passing.
The analytical upper bounds on the ABEP are found to be tight at moderate to
high signal-to-noise ratios (SNR). The proposed receiver algorithms are found
to scale very well in complexity while achieving near-optimal performance in
large dimensions. Simulation results show that, for the same spectral
efficiency, multiuser GSM-MIMO can outperform multiuser SM-MIMO as well as
conventional multiuser MIMO, by about 2 to 9 dB at a bit error rate of
. Such SNR gains in GSM-MIMO compared to SM-MIMO and conventional MIMO
can be attributed to the fact that, because of a larger number of spatial index
bits, GSM-MIMO can use a lower-order QAM alphabet which is more power
efficient.Comment: IEEE Trans. on Wireless Communications, accepte
A Belief Propagation Based Framework for Soft Multiple-Symbol Differential Detection
Soft noncoherent detection, which relies on calculating the \textit{a
posteriori} probabilities (APPs) of the bits transmitted with no channel
estimation, is imperative for achieving excellent detection performance in
high-dimensional wireless communications. In this paper, a high-performance
belief propagation (BP)-based soft multiple-symbol differential detection
(MSDD) framework, dubbed BP-MSDD, is proposed with its illustrative application
in differential space-time block-code (DSTBC)-aided ultra-wideband impulse
radio (UWB-IR) systems. Firstly, we revisit the signal sampling with the aid of
a trellis structure and decompose the trellis into multiple subtrellises.
Furthermore, we derive an APP calculation algorithm, in which the
forward-and-backward message passing mechanism of BP operates on the
subtrellises. The proposed BP-MSDD is capable of significantly outperforming
the conventional hard-decision MSDDs. However, the computational complexity of
the BP-MSDD increases exponentially with the number of MSDD trellis states. To
circumvent this excessive complexity for practical implementations, we
reformulate the BP-MSDD, and additionally propose a Viterbi algorithm
(VA)-based hard-decision MSDD (VA-HMSDD) and a VA-based soft-decision MSDD
(VA-SMSDD). Moreover, both the proposed BP-MSDD and VA-SMSDD can be exploited
in conjunction with soft channel decoding to obtain powerful iterative
detection and decoding based receivers. Simulation results demonstrate the
effectiveness of the proposed algorithms in DSTBC-aided UWB-IR systems.Comment: 14 pages, 12 figures, 3 tables, accepted to appear on IEEE
Transactions on Wireless Communications, Aug. 201
mmWave Massive MIMO with Simple RF and Appropriate DSP
There is considerable interest in the combined use of millimeter-wave
(mmwave) frequencies and arrays of massive numbers of antennas (massive MIMO)
for next-generation wireless communications systems. A symbiotic relationship
exists between these two factors: mmwave frequencies allow for densely packed
antenna arrays, and hence massive MIMO can be achieved with a small form
factor; low per-antenna SNR and shadowing can be overcome with a large array
gain; steering narrow beams or nulls with a large array is a good match for the
line-of-sight (LOS) or near-LOS mmwave propagation environments, etc.. However,
the cost and power consumption for standard implementations of massive MIMO
arrays at mmwave frequencies is a significant drawback to rapid adoption and
deployment. In this paper, we examine a number of possible approaches to reduce
cost and power at both the basestation and user terminal, making up for it with
signal processing and additional (cheap) antennas. These approaches include
lowresolution Analog-to-Digital Converters (ADCs), wireless local oscillator
distribution networks, spatial multiplexing and multistreaming instead of
higher-order modulation etc.. We will examine the potential of these approaches
in making mmwave massive MIMO a reality and discuss the requirements in terms
of digital signal processing (DSP).Comment: published in Asilomar 201
Massive MIMO is a Reality -- What is Next? Five Promising Research Directions for Antenna Arrays
Massive MIMO (multiple-input multiple-output) is no longer a "wild" or
"promising" concept for future cellular networks - in 2018 it became a reality.
Base stations (BSs) with 64 fully digital transceiver chains were commercially
deployed in several countries, the key ingredients of Massive MIMO have made it
into the 5G standard, the signal processing methods required to achieve
unprecedented spectral efficiency have been developed, and the limitation due
to pilot contamination has been resolved. Even the development of fully digital
Massive MIMO arrays for mmWave frequencies - once viewed prohibitively
complicated and costly - is well underway. In a few years, Massive MIMO with
fully digital transceivers will be a mainstream feature at both sub-6 GHz and
mmWave frequencies. In this paper, we explain how the first chapter of the
Massive MIMO research saga has come to an end, while the story has just begun.
The coming wide-scale deployment of BSs with massive antenna arrays opens the
door to a brand new world where spatial processing capabilities are
omnipresent. In addition to mobile broadband services, the antennas can be used
for other communication applications, such as low-power machine-type or
ultra-reliable communications, as well as non-communication applications such
as radar, sensing and positioning. We outline five new Massive MIMO related
research directions: Extremely large aperture arrays, Holographic Massive MIMO,
Six-dimensional positioning, Large-scale MIMO radar, and Intelligent Massive
MIMO.Comment: 20 pages, 9 figures, submitted to Digital Signal Processin
- …