305 research outputs found
Code-timing synchronization in DS-CDMA systems using space-time diversity
The synchronization of a desired user transmitting a known training sequence in a direct-sequence (DS) asynchronous code-division multiple-access (CDMA) sys-tem is addressed. It is assumed that the receiver consists of an arbitrary antenna array and works in a near-far, frequency-nonselective, slowly fading channel. The estimator that we propose is derived by applying the maximum likelihood (ML) principle to a signal model in which the contribution of all the interfering compo-nents (e.g., multiple-access interference, external interference and noise) is modeled as a Gaussian term with an unknown and arbitrary space-time correlation matrix. The main contribution of this paper is the fact that the estimator makes eÆcient use of the structure of the signals in both the space and time domains. Its perfor-mance is compared with the Cramer-Rao Bound, and with the performance of other methods proposed recently that also employ an antenna array but only exploit the structure of the signals in one of the two domains, while using the other simply as a means of path diversity. It is shown that the use of the temporal and spatial structures is necessary to achieve synchronization in heavily loaded systems or in the presence of directional external interference.Peer ReviewedPostprint (published version
Cyclic Prefix-Free MC-CDMA Arrayed MIMO Communication Systems
The objective of this thesis is to investigate MC-CDMA MIMO systems where
the antenna array geometry is taken into consideration. In most MC-CDMA
systems, cyclic pre xes, which reduce the spectral e¢ ciency, are used. In order
to improve the spectral efficiency, this research study is focused on cyclic pre x-
free MC-CDMA MIMO architectures.
Initially, space-time wireless channel models are developed by considering the
spatio-temporal mechanisms of the radio channel, such as multipath propaga-
tion. The spatio-temporal channel models are based on the concept of the array
manifold vector, which enables the parametric modelling of the channel.
The array manifold vector is extended to the multi-carrier space-time array
(MC-STAR) manifold matrix which enables the use of spatio-temporal signal
processing techniques. Based on the modelling, a new cyclic pre x-free MC-
CDMA arrayed MIMO communication system is proposed and its performance
is compared with a representative existing system. Furthermore, a MUSIC-type
algorithm is then developed for the estimation of the channel parameters of the
received signal.
This proposed cyclic pre x-free MC-CDMA arrayed MIMO system is then
extended to consider the effects of spatial diffusion in the wireless channel. Spatial
diffusion is an important channel impairment which is often ignored and the
failure to consider such effects leads to less than satisfactory performance. A
subspace-based approach is proposed for the estimation of the channel parameters
and spatial spread and reception of the desired signal.
Finally, the problem of joint optimization of the transmit and receive beam-
forming weights in the downlink of a cyclic pre x-free MC-CDMA arrayed MIMO
communication system is investigated. A subcarrier-cooperative approach is used
for the transmit beamforming so that there is greater flexibility in the allocation
of channel symbols. The resulting optimization problem, with a per-antenna
transmit power constraint, is solved by the Lagrange multiplier method and an
iterative algorithm is proposed
Spatio-Temporal processing for Optimum Uplink-Downlink WCDMA Systems
The capacity of a cellular system is limited by two different phenomena, namely
multipath fading and multiple access interference (MAl). A Two Dimensional (2-D)
receiver combats both of these by processing the signal both in the spatial and temporal
domain. An ideal 2-D receiver would perform joint space-time processing, but at the
price of high computational complexity. In this research we investigate computationally
simpler technique termed as a Beamfom1er-Rake. In a Beamformer-Rake, the output of a
beamfom1er is fed into a succeeding temporal processor to take advantage of both the
beamformer and Rake receiver. Wireless service providers throughout the world are
working to introduce the third generation (3G) and beyond (3G) cellular service that will
provide higher data rates and better spectral efficiency. Wideband COMA (WCDMA)
has been widely accepted as one of the air interfaces for 3G. A Beamformer-Rake
receiver can be an effective solution to provide the receivers enhanced capabilities
needed to achieve the required performance of a WCDMA system.
We consider three different Pilot Symbol Assisted (PSA) beamforming techniques,
Direct Matrix Inversion (DMI), Least-Mean Square (LMS) and Recursive Least Square
(RLS) adaptive algorithms. Geometrically Based Single Bounce (GBSB) statistical
Circular channel model is considered, which is more suitable for array processing, and
conductive to RAKE combining. The performances of the Beam former-Rake receiver are
evaluated in this channel model as a function of the number of antenna elements and
RAKE fingers, in which are evaluated for the uplink WCDMA system. It is shown that,
the Beamformer-Rake receiver outperforms the conventional RAKE receiver and the
conventional beamformer by a significant margin. Also, we optimize and develop a
mathematical formulation for the output Signal to Interference plus Noise Ratio (SINR)
of a Beam former-Rake receiver.
In this research, also, we develop, simulate and evaluate the SINR and Signal to Noise
Ratio (Et!Nol performances of an adaptive beamforming technique in the WCDMA
system for downlink. The performance is then compared with an omnidirectional antenna
system. Simulation shows that the best perfom1ance can be achieved when all the mobiles
with same Angle-of-Arrival (AOA) and different distance from base station are formed in
one beam
Space time transceiver design over multipath fading channels
Imperial Users onl
Channel estimation and signal enhancement for DS-CDMA systems
This dissertation focuses on topics of Bayesian-based multiuser detection, space-time (S-T) transceiver design, and S-T channel parameter estimation for direct-sequence code-division multiple-access (DS-CDMA) systems.
Using the Bayesian framework, various linear and simplified nonlinear multiuser detectors are proposed, and their performances are analyzed. The simplified non-linear Bayesian solutions can bridge the performance gap between sub-optimal linear multiuser detectors and the optimum multiuser detector.
To further improve the system capacity and performance, S-T transceiver design approaches with complexity constraint are investigated. Novel S-T receivers of low-complexity that jointly use the temporal code-signature and the spatial signature are proposed. Our solutions, which lead to generalized near-far resistant S-T RAKE receivers, achieve better interference suppression than the existing S-T RAKE receivers.
From transmitter side, we also proposed a transmit diversity (TD) technique in combination with differential detection for the DS-CDMA systems. It is shown that the proposed S-T TD scheme in combination with minimum variance distortionless response transceiver (STTD+MVDR) is near-far resistant and outperforms the conventional STTD and matched filter based (STTD+MF) transceiver scheme.
Obtaining channel state information (CSI) is instrumental to optimum S-T transceiver design in wireless systems. Another major focus of this dissertation is to estimate the S-T channel parameters. We proposed an asymptotic, joint maximum likelihood (ML) method of estimating multipath channel parameters for DS-CDMA systems. An iterative estimator is proposed to further simplify the computation. Analytical and simulation results show that the iterative estimation scheme is near-far resistant for both time delays and DOAs. And it reaches the corresponding CRBs after a few iterations
Spatio-Temporal processing for Optimum Uplink-Downlink WCDMA Systems
The capacity of a cellular system is limited by two different phenomena, namely
multipath fading and multiple access interference (MAl). A Two Dimensional (2-D)
receiver combats both of these by processing the signal both in the spatial and temporal
domain. An ideal 2-D receiver would perform joint space-time processing, but at the
price of high computational complexity. In this research we investigate computationally
simpler technique termed as a Beamfom1er-Rake. In a Beamformer-Rake, the output of a
beamfom1er is fed into a succeeding temporal processor to take advantage of both the
beamformer and Rake receiver. Wireless service providers throughout the world are
working to introduce the third generation (3G) and beyond (3G) cellular service that will
provide higher data rates and better spectral efficiency. Wideband COMA (WCDMA)
has been widely accepted as one of the air interfaces for 3G. A Beamformer-Rake
receiver can be an effective solution to provide the receivers enhanced capabilities
needed to achieve the required performance of a WCDMA system.
We consider three different Pilot Symbol Assisted (PSA) beamforming techniques,
Direct Matrix Inversion (DMI), Least-Mean Square (LMS) and Recursive Least Square
(RLS) adaptive algorithms. Geometrically Based Single Bounce (GBSB) statistical
Circular channel model is considered, which is more suitable for array processing, and
conductive to RAKE combining. The performances of the Beam former-Rake receiver are
evaluated in this channel model as a function of the number of antenna elements and
RAKE fingers, in which are evaluated for the uplink WCDMA system. It is shown that,
the Beamformer-Rake receiver outperforms the conventional RAKE receiver and the
conventional beamformer by a significant margin. Also, we optimize and develop a
mathematical formulation for the output Signal to Interference plus Noise Ratio (SINR)
of a Beam former-Rake receiver.
In this research, also, we develop, simulate and evaluate the SINR and Signal to Noise
Ratio (Et!Nol performances of an adaptive beamforming technique in the WCDMA
system for downlink. The performance is then compared with an omnidirectional antenna
system. Simulation shows that the best perfom1ance can be achieved when all the mobiles
with same Angle-of-Arrival (AOA) and different distance from base station are formed in
one beam
Enhanced MDIR receiver for space-time dispersive channels
A particular property of the matched desired
impulse response receiver is introduced in this paper, namely,
the fact that full exploitation of the diversity is obtained with
multiple beamformers when the channel is spatially and timely
dispersive. This particularity makes the receiver specially suitable
for mobile and underwater communications. The new structure
provides better performance than conventional and weighted
VRAKE receivers, and a diversity gain with no needs of additional
radio frequency equipment. The baseband hardware needed
for this new receiver may be obtained through reconfigurability
of the RAKE architectures available at the base station. The
proposed receiver is tested through simulations assuming UTRA
frequency-division-duplexing mode.Peer Reviewe
- …